pretty new to the Subaru world and have come across a really odd issue with my car, sometimes boosts up perfectly but most of the time feels really sluggish on boost as if its running wastegate pressure 0.5 bar.iv had a read of a few threads and cleaned the boost control solenoid and nothing changed I then un plugged the solenoid and took the car round the block and it drove exactly the same. im sure its the solenoid problem im having but just thought id see if it could be anything else before I shell out some money for a new boost solenoid.


cheers

 

had this on customers while ago actuator diaphram was faulty so replaced and cured his if u have acces to a vacumm tool for sucking components give it quick try if good try plugs for flash codes mite help before spending money hope this helps

 

what do you mean by plugs for flash codes bud? do you mean clear any codes on the car etc?

 

under speedo cluster there should be 2 lime green plug male n female connect these then 2nd click on ignition there should be engine check light on it will flash a certain pattern if there is any stored fault on ecu

 

wats your email i can email u info