So I have a 2.5 Middle section and a 3" miltek backbox is the easiest way to get them to join is to get it welded together ?
Thanks

 

if your welding isnt great then two V band clamps of correct sizes,

 

The pipes are flanged
Not sure how them v band clamps works?

 

Basically with v band is like two flanges clamped by a band, you will need to weld the flanges to the corresponding pipes. However, if your weldin is not great it be a lot easier to weld them on as you can overlap weld them onto the reducer and then make sure that everything is air tight so you dont get exhaust blowing once all installed.

If you just weld the reducer straight on it be prone to corroding and snapping

i hope that all makes sense or you can take it to a professional garage other than kwick fit to weld the bits together

 

oh sorry ignore the above, then just buy the flanges and weld them on and join it that way will also work sorry i thought the exhaust was like just a pipe ie snapped

why not get a 2.5" backbox then there be no headache

 

Cuz I've got a japspeed system and that's too loud.
Also I bought a reducer 3" to 2.5" for some reason the the reducer pipe doesn't seem to fit in the 3" back box even thow there both 3" and ideas?

 

hmm odd can you post pic?

 

1min

 

 

so you will need one of each 2.5" and 3" something like the one

 

oh and two gaskets

 

Still will nee to weld them on though

or am i misunderstanding

 

Ok thanks mate have u got a link ?

 

shop around fleabay and google and you will find something here is an example

http://stores.ebay.co.uk/Rev-Motorst...=p4634.c0.m322

go for a snormal steel one

goodluck

 

Hi there

Try to speak with Scoobyparts,they few months ago have in stock 3" to 2.5" exhaust adaptor kit,now on their website I can't find it

http://www.scoobyparts.com/acatalog/...APTOR_KIT.html

Thanks,Jura