hi
need to know what the rear arms are called, because changing the bushes closet to the hub, both bushes have 1 big bolt going through them
right at the bottom of the hub
hope this makes sense lol



from this it looks like numbers 13 and 16

 

The ones that go side to side (there are four of them) are lateral link arms as far as I have always known.

The ones that go front to back (there are two) are the trailing arms.

There are lots of names for the bits tho...

 

Thank you
No it's not the trailing arms I'm on about
I wanted to know the name of the arms before I bought the bushes so I could make 100 % sure Iv ordered the correct ones
Lateral link arms are the ones I needed thanks again

 

Lateral links, you want bushes 13 & 16 from the diagram.

 

did you get the bushes for number 16 i need the same it was stuck to the long bolt does it need pressed in or can a 2 piece superpro bush go in there.

 

Poly ones go in much easier. You may need to use some force but you don't need a press. I used a black and decker work mate style work bench to push them in.