Race Car Build - DIY Style
Pinned 2.5 Block
14mm Headstuds (RCM)
OEM 2.5 crank
Pauter Rods
Cosworth Pistons
RCM 12 oil pump
New Modine
RCM water pump
2.5 AVCS heads (D25)
Supertech Nitrided Stainless Inlet Valves
Supertech Inconel Exhaust Valves
Supertech Double Valve Springs
Supertech Titanium Lifters
RCM spring seats
CDF racing Vernier exhaust pulleys
Cosworth sump Baffle plate.
Tumble delete housings
Newage manifold with throttle body
GT35R turbo Rotated RCM
Will be running Syvecs with JGM mapping.
14mm Headstuds (RCM)
OEM 2.5 crank
Pauter Rods
Cosworth Pistons
RCM 12 oil pump
New Modine
RCM water pump
2.5 AVCS heads (D25)
Supertech Nitrided Stainless Inlet Valves
Supertech Inconel Exhaust Valves
Supertech Double Valve Springs
Supertech Titanium Lifters
RCM spring seats
CDF racing Vernier exhaust pulleys
Cosworth sump Baffle plate.
Tumble delete housings
Newage manifold with throttle body
GT35R turbo Rotated RCM
Will be running Syvecs with JGM mapping.
Last edited by Matt R; Mar 8, 2013 at 05:22 PM.
Few updates after Daz moaned that i am no good at updating project threads!
Had a few issues with cooling, didnt feelnthe fans on it were up to much, so replaced them with 2 12" Pacets, now you can actually hear them working! Changed rad too as that was leaking at the seam by the endtanks:
Put it back together just in time for Blyton Sprint, and trailered it up there to its birthplace! Lol. Daz very kindly let me store it at his the night before.
At Blyton had some issues with coolant temp again, Daz attended with me and was a great help during the day, thanks Daz. We decided to change the aftermarket Header Tank on it back to an OEM one and try from there, a quick trip to Dazs saw one removed from my old JDM widetrack, back at track was re-fitted then went out again, found water temp to be sorted!
Some pics from the day:
Had a few issues with cooling, didnt feelnthe fans on it were up to much, so replaced them with 2 12" Pacets, now you can actually hear them working! Changed rad too as that was leaking at the seam by the endtanks:
Put it back together just in time for Blyton Sprint, and trailered it up there to its birthplace! Lol. Daz very kindly let me store it at his the night before.
At Blyton had some issues with coolant temp again, Daz attended with me and was a great help during the day, thanks Daz. We decided to change the aftermarket Header Tank on it back to an OEM one and try from there, a quick trip to Dazs saw one removed from my old JDM widetrack, back at track was re-fitted then went out again, found water temp to be sorted!
Some pics from the day:
Finally after a few teething problems, met Simon JGM at SVA Imports today to finalise the map on the car.
Big thanks to Simon for his patience over the past few months, even going out of his way and doing some interesting late night mapping sessions. Thanks again Simon.
Few other changes have been made since last update with the addition of Carbon Door Trims front and rear, New flocked dash etc. Will take some pics at the weekend and update.
Big thanks to Simon for his patience over the past few months, even going out of his way and doing some interesting late night mapping sessions. Thanks again Simon.
Few other changes have been made since last update with the addition of Carbon Door Trims front and rear, New flocked dash etc. Will take some pics at the weekend and update.
Former Sponsor
iTrader: (4)
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Finally after a few teething problems, met Simon JGM at SVA Imports today to finalise the map on the car.
Big thanks to Simon for his patience over the past few months, even going out of his way and doing some interesting late night mapping sessions. Thanks again Simon.
Few other changes have been made since last update with the addition of Carbon Door Trims front and rear, New flocked dash etc. Will take some pics at the weekend and update.
Big thanks to Simon for his patience over the past few months, even going out of his way and doing some interesting late night mapping sessions. Thanks again Simon.
Few other changes have been made since last update with the addition of Carbon Door Trims front and rear, New flocked dash etc. Will take some pics at the weekend and update.
Thread
Thread Starter
Forum
Replies
Last Post
ossett2k2
Engine Management and ECU Remapping
15
Sep 23, 2015 09:11 AM
