When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Yeah, thought as much. How much for the one with the blanking plate Rob as i just want to get rid of the horrible looking switch that has been fitted. Im sure i wouldnt be missing out not having the card holder.
So is the cup holder and blanking plate/card holder seperate to the vents with hazard switch?
From memory the cup holder is separate to the hazard/vents.
Originally Posted by JonMc
Sort your wrapping out Rob, but to fit the credit card holder piece your would need the air vents/hazard switch housing as the blank is one piece attached to the vents on a UK car, so without it won't fit
You can still use the original cup holder
Wrapping all done
just to confirm, I only have the one jdm hazard switch/credit card holder and cup holder.
I've just looked and I have another cup holder only, the blanking part went with the hazard switches from the other car.
Yeah, thought as much. How much for the one with the blanking plate Rob as i just want to get rid of the horrible looking switch that has been fitted. Im sure i wouldnt be missing out not having the card holder.
My bad mate, just checked and I dont have this I will check in the garage to see if im mistaken tomorrow.
I have the JDM one though as pictured in the pg1 pics.
Ok, so how much for the vents and the card holder then Rob, with postage? My cup holder is fine, so wouldnt need that as long as it would fit with the JDM vents?
Ok, so how much for the vents and the card holder then Rob, with postage? My cup holder is fine, so wouldnt need that as long as it would fit with the JDM vents?
And if you only want the blank, depending upon the price I will have a spare blank if I upgrade to the card holder - it is 3M carbon wrapped but I can remove that - maybe a deal can be done
Ok, so how much for the vents and the card holder then Rob, with postage? My cup holder is fine, so wouldnt need that as long as it would fit with the JDM vents?
Originally Posted by JonMc
And if you only want the blank, depending upon the price I will have a spare blank if I upgrade to the card holder - it is 3M carbon wrapped but I can remove that - maybe a deal can be done
Right, Jonmc, this would really depend on price (especially as it isnt an upgrade) and whether you can remove the carbon wrap without scratching the plastic, but you could have a deal
I would ask for a portion of what I was paying for the upgrade - the carbon wrap should just lift off if I heat it. Let's see what price Rob wants, agree a price for the other bit and assuming I can get the wrap off without damaging my bit do a deal
Yep, tenner is fine. Let me know when you have got the wrapping off ok. I suppose, if they were fine before before the wrapping then they should be ok underneath. Let me know then mate and i'll send payment over.
It should have gone out today. I left work at 2pm and they were still not picked up, but they were scheduled to be collected today, so im gussing my collegue has sorted them out