Breaking my JDM Bugeye 2002 STI
27 November 2011, 03:36 PM
#63
Had a quick look, and it appears the spats and the diffuser go hand in hand. Might be best waiting for me to get them off the car and going from there.
Again apologies for the pics, it needs a wash
Last edited by Rob Day; 27 November 2011 at 03:38 PM.
27 November 2011, 04:19 PM
#64
To Prevent further delay on guys wanting parts, can you please get in touch to get parts you require and arrange payment including postage or collection.
I cant be fair and wait out on a 1st come - 1st served when people ar queing up.
Thanks,
Rob
I cant be fair and wait out on a 1st come - 1st served when people ar queing up.
Thanks,
Rob
27 November 2011, 07:44 PM
#69
Yes mate, you wasnt after buying the car complete were you 
If your after parts mate just post on the thread what you require, I should get things moving this week, as the Gearbox kit and rear brakes will definatly be sold to one of only three buyers
Rob
If your after parts mate just post on the thread what you require, I should get things moving this week, as the Gearbox kit and rear brakes will definatly be sold to one of only three buyers
Rob
27 November 2011, 08:04 PM
#70
Scooby Regular
iTrader: (51)
Join Date: Nov 2002
Location: MSOC
Posts: 7,439
Likes: 0
Received 0 Likes
on
0 Posts
Any idea when it will be off? IIRC there was an OEM rear diffuser with side spats as part of a kit of which I have the front splitter so it could be one of those.
Either way I look forward to the pics when it's removed
Either way I look forward to the pics when it's removed
27 November 2011, 08:17 PM
#71
)Take some items out of the car before taking it for breaking, so parts that are cosmetic and wont prevent me driving it illegally for it last drive
()Breaking at CAMS Performance 25 miles away.
Take off before hand:
Spats, diffuser, repeaters, wind deflectors, stereo, Interior (bar drivers seat of course until I get there), spoiler, spare wheel, splitter, fog covers, grille.
Then once at CAMS depending on timing and Brian's availability I will take off the easy bits until Brian is ready to get it on the ramp to remove the parts that then make it difficult to move or at least manouver around, so wheels, brakes, gearbox kit, engine, struts, fuel pump, turbo etc etc.
Rob
27 November 2011, 08:50 PM
#74
Scooby Regular
iTrader: (51)
Join Date: Nov 2002
Location: MSOC
Posts: 7,439
Likes: 0
Received 0 Likes
on
0 Posts
Certainly have mate and the jap baby on board stickers you did, they still look great even though I put one MSOC sticker on wonky 
JonMc was thinking about getting some but in red and white for his scoob, is your machine working again?
Also when you remove the spats and diffuser could you take a pic of just the diffuser fitted so I can see what it looks like?
JonMc was thinking about getting some but in red and white for his scoob, is your machine working again?
Also when you remove the spats and diffuser could you take a pic of just the diffuser fitted so I can see what it looks like?
27 November 2011, 10:10 PM
#76
Certainly have mate and the jap baby on board stickers you did, they still look great even though I put one MSOC sticker on wonky
JonMc was thinking about getting some but in red and white for his scoob, is your machine working again?
Also when you remove the spats and diffuser could you take a pic of just the diffuser fitted so I can see what it looks like?
JonMc was thinking about getting some but in red and white for his scoob, is your machine working again?
Also when you remove the spats and diffuser could you take a pic of just the diffuser fitted so I can see what it looks like?
The printer is fecked, and will never be used again. I have subbed the work out for printing now until I either jack the whole printing thing in, or continue to sub work out if it works out feasible. The Snet graphics are with G4 now along with some other items. Im yet to design some 1/18th scale graphics for Nitros subaru shells, but timing!
My Plotter cutter is still up and running (touch wood) for Decals, so I can make Stickers, Decals and any other graphics that dont require print such as your MSOC's
Pallet delivery is usually around £50 for bulk.
Rob
28 November 2011, 07:58 AM
#78
28 November 2011, 08:47 AM
#79
Scooby Regular
iTrader: (51)
Join Date: Nov 2002
Location: MSOC
Posts: 7,439
Likes: 0
Received 0 Likes
on
0 Posts
No Problem, will try and get the bits done tomorrow evening all being well, and if need be I will take some time off work to get ahead.
The printer is fecked, and will never be used again. I have subbed the work out for printing now until I either jack the whole printing thing in, or continue to sub work out if it works out feasible. The Snet graphics are with G4 now along with some other items. Im yet to design some 1/18th scale graphics for Nitros subaru shells, but timing!
My Plotter cutter is still up and running (touch wood) for Decals, so I can make Stickers, Decals and any other graphics that dont require print such as your MSOC's
Rob
The printer is fecked, and will never be used again. I have subbed the work out for printing now until I either jack the whole printing thing in, or continue to sub work out if it works out feasible. The Snet graphics are with G4 now along with some other items. Im yet to design some 1/18th scale graphics for Nitros subaru shells, but timing!
My Plotter cutter is still up and running (touch wood) for Decals, so I can make Stickers, Decals and any other graphics that dont require print such as your MSOC's
Rob
28 November 2011, 04:46 PM
#81
Page 1 Updated - Gearbox and Rear Brembos Sold
Ok mate cheers
Not had time to get the diffuser and spats off today, now its dark
I'll get the car in the garage tonight or do it tomorrow 
No Trouble mate, paypal address below
Dont forget delivery address details and a tel number in the comments.
Rob
Not had time to get the diffuser and spats off today, now its dark
I'll get the car in the garage tonight or do it tomorrow Dont forget delivery address details and a tel number in the comments.
Rob
28 November 2011, 07:25 PM
#83
Scooby Regular
iTrader: (6)
Join Date: Oct 2010
Location: bathgate ,scotland
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
One of these? http://www.sidtech.co.uk/iu/SPEN55549567609486.JPG
Hi Rob yes thats the one , do you have it available , if so how much posted to Edinburgh
cheers
28 November 2011, 08:21 PM
#85
Hi Rob,
Interested in the fog covers and fittings, is that £40 delivered, can send them the same time as side repeaters if need be?
Cheers mate, I can send payment as soon as you let me know
Interested in the fog covers and fittings, is that £40 delivered, can send them the same time as side repeaters if need be?
Cheers mate, I can send payment as soon as you let me know
Last edited by Scoobyno1; 28 November 2011 at 08:22 PM.
