Notices
Group Buys Post your Group Buy and subscribe to existing group buys here!

Group Buy- Harness bars!!

Old Nov 20, 2011 | 12:02 PM
  #31  
wrighty338's Avatar
wrighty338
Scooby Regular
iTrader: (33)
 
Joined: Jul 2007
Posts: 4,791
Likes: 0
From: E Yorks
Default

Previously we had stock of all materials and thats how we did so many group buys at good prices as we got materials down to minimum and wanted to use them up. The amount of time it takes to make them is still the same however for any less then 5 its not worth setting machinery up. We now have no stock of anything to do harness bars, tube, rose joints or bolts so whatever we need to buy will be at whatever price we can get them at, obviously still as cheap as possible.

Basic ones, coated gloss + crinkle black / white etc il guestimate 160. Postage is 15 quid. This is a vague price but everything needs to be covered.

I dont know how much more work these little bars ontop are to stop your harness' moving about but once your harness' are tight they wont move anyway. There will be an extra cost for those that want these.

Any other colour then black/white/silver/greys will be extra - just blacks cheapest and most stealth. We can have them done any colour you like, including CANDY's which look great however the powder coaters for these finishes is further away, so costs more to take them, pay a higher price for each bespoke colour etc.

This GB will be a lot stricter then previous ones as we will only buy in what we need and once your in, il require payments etc. The sooner i can get accurate numbers the sooner i can go to suppliers and get accurate prices.
Reply
Old Nov 21, 2011 | 01:28 PM
  #32  
N_Scooby's Avatar
N_Scooby
Scooby Regular
iTrader: (2)
 
Joined: Jun 2008
Posts: 979
Likes: 0
From: www.dsoc.co.nr
Default

A couple of questions -

Do you attach your harnesses around the harness bar instead of fixing them down to anchor points? Are the harness bars strong enough in the event of a track accident doing it this way?

Also, what is rear access like with a harness bar fitted? I have to fit a child seat in the rear of my car. From the photos it looks to be quite good. I could cover with soft padding so I didn't **** his head every time access was needed.
Reply
Old Nov 22, 2011 | 12:16 AM
  #33  
wrighty338's Avatar
wrighty338
Scooby Regular
iTrader: (33)
 
Joined: Jul 2007
Posts: 4,791
Likes: 0
From: E Yorks
Default

do you think they would be in production by companies such as sparco if they were not safe?

rear access is the same, however common sense says you wont have anyone in the back with one in full stop.
Reply
Old Nov 22, 2011 | 04:16 PM
  #34  
N_Scooby's Avatar
N_Scooby
Scooby Regular
iTrader: (2)
 
Joined: Jun 2008
Posts: 979
Likes: 0
From: www.dsoc.co.nr
Default

Does no one have people in the back then with these fitted? All the photos I have seen still have the back seats fitted.
Reply
Old Nov 23, 2011 | 01:48 AM
  #35  
wrighty338's Avatar
wrighty338
Scooby Regular
iTrader: (33)
 
Joined: Jul 2007
Posts: 4,791
Likes: 0
From: E Yorks
Default

frayz has one, no rear seats.
Reply
Old Nov 23, 2011 | 08:08 AM
  #36  
st03eko's Avatar
st03eko
Scooby Regular
iTrader: (1)
 
Joined: Aug 2008
Posts: 164
Likes: 0
From: suffolk
Default

I've got these fitted to my 05 Scoob. And the are brill, I have the harness wrapped around and they don't slip at all. For added protection I have wrapped the bar in a large foam tube. The people that I have had on the back love it cause they have something to hold onto.
Reply
Old Nov 23, 2011 | 08:55 AM
  #37  
Turbotits's Avatar
Turbotits
Scooby Regular
20 Year Member
iTrader: (2)
 
Joined: Jan 2004
Posts: 4,312
Likes: 0
From: Hertfordshire
Default

Im still wanting one
Reply
Old Nov 23, 2011 | 05:33 PM
  #38  
chronicK's Avatar
chronicK
Scooby Regular
iTrader: (1)
 
Joined: Oct 2011
Posts: 72
Likes: 0
From: Derbyshire
Default

1. flame_on: gloss black for classic please.
2. EmzWRX : ?
3. Turbotits: Black for a new age
4. ChronicK. Bugeye. WR blue? ** If it makes your life easier I can cope with Black as the 2 above.

Last edited by chronicK; Nov 25, 2011 at 09:48 PM.
Reply
Old Nov 25, 2011 | 05:36 PM
  #39  
coco08's Avatar
coco08
Scooby Regular
 
Joined: May 2008
Posts: 69
Likes: 0
From: Chesterfield
Default

Originally Posted by st03eko
I've got these fitted to my 05 Scoob. And the are brill, I have the harness wrapped around and they don't slip at all. For added protection I have wrapped the bar in a large foam tube. The people that I have had on the back love it cause they have something to hold onto.
Do you have any pictures of yours fitted as I have a 05 scoob aswell...

Cheers
Reply
Old Nov 27, 2011 | 12:26 PM
  #40  
wrighty338's Avatar
wrighty338
Scooby Regular
iTrader: (33)
 
Joined: Jul 2007
Posts: 4,791
Likes: 0
From: E Yorks
Default

pretty sure if you search my GB threads there might be some pics of them in newage cars

are we moving forward with these? is there anymore info needed or anything? can we get 5 names?
Reply
Old Nov 27, 2011 | 12:34 PM
  #41  
sp00ks's Avatar
sp00ks
Scooby Regular
iTrader: (11)
 
Joined: Feb 2010
Posts: 1,215
Likes: 0
From: Bristol
Default

I am interest but price dependent.

Can you do these in crinkle White please?

Cheers
Reply
Old Nov 27, 2011 | 05:51 PM
  #42  
wrighty338's Avatar
wrighty338
Scooby Regular
iTrader: (33)
 
Joined: Jul 2007
Posts: 4,791
Likes: 0
From: E Yorks
Default

rough prices have already been posted i cant give exact until theres deffinate numbers as explained above.

unsure, will have to check. possbily only black and grey in crinkle
Reply
Old Nov 27, 2011 | 08:05 PM
  #43  
James N's Avatar
James N
Scooby Regular
iTrader: (10)
 
Joined: Apr 2006
Posts: 381
Likes: 0
From: Sudbury
Default

1. flame_on: gloss black for classic please.
2. EmzWRX : ?
3. Turbotits: Black for a new age
4. ChronicK. Bugeye. WR blue? ** If it makes your life easier I can cope with Black as the 2 above.
5. James N: gloss black for a classic

Go on then, i'll take one of these
James
Reply
Old Nov 28, 2011 | 05:45 PM
  #44  
Turbotits's Avatar
Turbotits
Scooby Regular
20 Year Member
iTrader: (2)
 
Joined: Jan 2004
Posts: 4,312
Likes: 0
From: Hertfordshire
Default

Great thats 5. Let me know when and where to send payment
Reply
Old Nov 28, 2011 | 06:25 PM
  #45  
James N's Avatar
James N
Scooby Regular
iTrader: (10)
 
Joined: Apr 2006
Posts: 381
Likes: 0
From: Sudbury
Default

Me too, I'll get payment sent as soon as i know where to send it
James
Reply
Old Nov 29, 2011 | 11:35 AM
  #46  
flame_on's Avatar
flame_on
Thread Starter
Scooby Regular
20 Year Member
iTrader: (2)
 
Joined: Jan 2006
Posts: 189
Likes: 0
From: kent
Default

Woo-Hoo, let's get it on!
Reply
Old Nov 29, 2011 | 10:16 PM
  #47  
Gyver's Avatar
Gyver
Scooby Regular
iTrader: (1)
 
Joined: Jan 2007
Posts: 98
Likes: 0
Default

1. flame_on: gloss black for classic please.
2. EmzWRX : ?
3. Turbotits: Black for a new age
4. ChronicK. Bugeye. WR blue? ** If it makes your life easier I can cope with Black as the 2 above.
5. James N: gloss black for a classic
6. Gyver: gloss black for classic.


Please send info on total cost including shipment to Sweden

/David
Reply
Old Nov 29, 2011 | 10:39 PM
  #48  
wrighty338's Avatar
wrighty338
Scooby Regular
iTrader: (33)
 
Joined: Jul 2007
Posts: 4,791
Likes: 0
From: E Yorks
Default

il leave this open until the end of the week, at which point il contact all on the above list to confirm. 5 is minimum, 6 is fine, anymore for anymore you have until the weekend

Cheers
Jon
Reply
Old Dec 2, 2011 | 07:11 PM
  #49  
flame_on's Avatar
flame_on
Thread Starter
Scooby Regular
20 Year Member
iTrader: (2)
 
Joined: Jan 2006
Posts: 189
Likes: 0
From: kent
Default

Friday Bump^^
Reply
Old Dec 3, 2011 | 02:11 PM
  #50  
wrighty338's Avatar
wrighty338
Scooby Regular
iTrader: (33)
 
Joined: Jul 2007
Posts: 4,791
Likes: 0
From: E Yorks
Default

closing this tomorrow when everyone on the list will be contacted.
Reply
Old Dec 5, 2011 | 01:24 PM
  #51  
wrighty338's Avatar
wrighty338
Scooby Regular
iTrader: (33)
 
Joined: Jul 2007
Posts: 4,791
Likes: 0
From: E Yorks
Default

I have contacted everyone on the list via pm for payments if everyone could reply ASAP that will help things along nicely want these out ASAP to do other work

Thanks everyone
Reply
Old Dec 5, 2011 | 05:58 PM
  #52  
flame_on's Avatar
flame_on
Thread Starter
Scooby Regular
20 Year Member
iTrader: (2)
 
Joined: Jan 2006
Posts: 189
Likes: 0
From: kent
Default

Payment sent
Reply
Old Dec 5, 2011 | 07:28 PM
  #53  
James N's Avatar
James N
Scooby Regular
iTrader: (10)
 
Joined: Apr 2006
Posts: 381
Likes: 0
From: Sudbury
Default

Payment sent
Reply
Old Dec 6, 2011 | 04:15 PM
  #54  
Turbotits's Avatar
Turbotits
Scooby Regular
20 Year Member
iTrader: (2)
 
Joined: Jan 2004
Posts: 4,312
Likes: 0
From: Hertfordshire
Default

Payment sent
Reply
Old Dec 7, 2011 | 09:59 AM
  #55  
Gyver's Avatar
Gyver
Scooby Regular
iTrader: (1)
 
Joined: Jan 2007
Posts: 98
Likes: 0
Default

Payment sent
Reply
Old Dec 8, 2011 | 10:48 PM
  #56  
wrighty338's Avatar
wrighty338
Scooby Regular
iTrader: (33)
 
Joined: Jul 2007
Posts: 4,791
Likes: 0
From: E Yorks
Default

waiting on emz and chronic.....
Reply
Old Dec 8, 2011 | 11:11 PM
  #57  
chronicK's Avatar
chronicK
Scooby Regular
iTrader: (1)
 
Joined: Oct 2011
Posts: 72
Likes: 0
From: Derbyshire
Default

You shouldnt be waiting on me Jon. Sent through PayPal about 20mins after you messaged me.
Reply
Old Dec 9, 2011 | 12:50 AM
  #58  
wrighty338's Avatar
wrighty338
Scooby Regular
iTrader: (33)
 
Joined: Jul 2007
Posts: 4,791
Likes: 0
From: E Yorks
Default

oops, just waiting on emz
Reply
Old Dec 10, 2011 | 02:51 PM
  #59  
Turbotits's Avatar
Turbotits
Scooby Regular
20 Year Member
iTrader: (2)
 
Joined: Jan 2004
Posts: 4,312
Likes: 0
From: Hertfordshire
Default

Up for emz
Reply
Old Dec 11, 2011 | 01:16 PM
  #60  
chronicK's Avatar
chronicK
Scooby Regular
iTrader: (1)
 
Joined: Oct 2011
Posts: 72
Likes: 0
From: Derbyshire
Default

Originally Posted by EmzWRX
Still interested.........I think....... just have to wait till payday.......
Do we know if she is still interested or when pay day is? Have you had any kind of response Jon?
Reply

Thread Tools
Search this Thread

All times are GMT +1. The time now is 07:00 PM.