53

iTrader: (41)

I have seen this a few times in MSOC pics and I must say looks awesome. Well done indeed

If it were mine I would debadge the front to finish it off

Have some photos in my albums if you wanna see

rickya

iTrader: (18)

Very nice mate

All very good mappers on that list, just do whats convenient & fits in your budget.

R6HNN

iTrader: (5)

booked in for the remap with duncan on the 14th october

R6HNN

iTrader: (5)

does anybody know the part number of the banjo bolt i need to fit my oil feed pipe to the VF43 turbo?

AN07 PTN

good choice mate .. any man that drives a 780bhp scoob is ok by me lol
he has mapped my hawk twice and again on the 3rd oct after having a vf48 fitted.....

you cant go wrong with racedynamix!!!!!:lux hello:

AN07 PTN

i have one m8 if you want it ... i assume they are the same on all turbo as my tdo4 one fitted my vf48

R6HNN

iTrader: (5)

A massive thank you to Maggs and Mandeep for sorting my coilovers today i really appreciate the time and effort that went into fixing my clunking BCs, and just to let you know, the car feels a LOT better now.

on another note... b@$t@rd clutch!!!
off to lateral performance tomorow... remap on hold

Tomwrx

iTrader: (54)

lovely looking hawk mate. but ure lucky ure getting the clutch replaced now as u would have needed it done soon after the remap,

i ve got the same car and fitted the same turbo, and was running 355bhp 353lb/ft but my front diff started squealing like a bitch,so just put 6spd in it

the vf43 can get around 380 ish bhp but i wanted mine safely as its a daily driver.

wonder if those wheels would fit over brembos???

Chrish_WRX

nice looking hawkeye fella

R6HNN

iTrader: (5)

thanks for the comments guys

Fitted my Exedy Stage 1 organic clutch today... I think by next week I'm going to have a muscly left leg and have to limp

AN07 PTN

R6HNN .
What did you do about your flywheel? as i can not find one anywhere. not even subaru do one. it looks like im just gunna have to run the one on there . car has only done 14k so fingers crossed

M444GY

iTrader: (72)

any more updates rey i wanna see the new wheels

R6HNN

iTrader: (5)

I didn't have to change the flywheel on mine, it turns out its had a clutch change previously, and an uprated flywheel was fitted last time, which was still in minty fresh condition, so I didn't need to replace it.
I know lateral performance sell them, and there's lots on ebay too.

Maggs my wheels are still in the states, won't be landing til November 16th so its a long long wait

AN07 PTN

ummmm now that is odd because no one i have phoned ,lateral,scoobyclinic,API ,DDM ,EXEDY directly. none of them do a flywheel for a wrx 2.5 5mt from 06-07 as they changed them to a push clutch.. the only ones i have found ar a company called compotition clutch (cc) and they only sell as a complete kit clutch and fly, which is no good to me as i have a pink box waiting to go in......

so was yours slipping then and when you stripped it down fly was ok??/

R6HNN

iTrader: (5)

Yes mate, mine was slippin pretty bad, stripped it down to find an exedy basic clutch and exedy flywheel had been fitted previously. Fitted the pink box with anti judder disc and after the first few hundred miles all is well and as smooth as a footballers legs.

AN07 PTN

yet according to all of the companys i have rai incuding exedy themself they do not make one for a 06-07 wrx.... i have just had to buy a nused one from grade a subaru for £108 then i am gunna have to get that skimmed to be sure ... i really dont understand how u have a exedy flywheel do you have the receipt for it with the part number coz if you have one i will get the same

R6HNN

iTrader: (5)

No it was done by a previous owner, I was shocked to see the clutch and flywheel had been changed previously, the cars only done 45k miles, and I thought the clutches were supposed to last 60k! Maybe other 5spd flywheels fit? Its only the clutch that's different, due to being a "push" clutch

R6HNN

iTrader: (5)

Also, I've just done a google search and there's quite a few companies that sell flywheels for the 2.5 wrx...
Exedy
ACT
Chromology
Fidanza
CC

AN07 PTN

i thought that but it turns out there is a differance between the 2 flywheels

AN07 PTN

they do but the stop making a fly wheel after 2.5 wrx 2005 when they changed to push clutch
..if i am wrong please post a link i will be glad off it cos i am sick of looking now lol. everyone i phone its a" no can do sorry" ...

R6HNN

iTrader: (5)

according to the links below, all 5spd imprezas have the same flywheel :s

http://www.flat4online.co.uk/catalog...uk-euro-models

http://www.flat4online.co.uk/catalog...uk-euro-models


here's an uprated one for the my06-07wrx
http://www.flat4online.co.uk/catalog...uk-euro-models

AN07 PTN

yet everyone i phone ie lateral, aztec performance, API ,scoobyspares, ddm , import car parts none of them have a part number listed for the 06-07.. talking to david at API he told me the differance between the flywheels is that on the 06-07 there is 3 locating pins where as on the pre 2006 there are 2 pins

R6HNN

iTrader: (5)

Got bored while sitting in the car yesterday, so decided to attack the interior with stickers...





More to be done on friday

Sketch

Rey............!


Russ!

b16msu265

iTrader: (6)

Looks spot on mate, that's what I was goin to do to the roof and mirrors before the orange but could not find the vinyl anywhere. Looks great

martin850

iTrader: (51)

Hmmmm it looks cool but not sure if it goes with your leather. Have you lacquered them Rey? Won't they wear off if you haven't.

Guv

iTrader: (8)

I like them.....I would possibly lacquer them as well

wiley

iTrader: (63)

Not sure rey, your car is more the smooth and subtle type. Looks wrong IMO

Wiley

R6HNN

iTrader: (5)

Little big update...

Wheels arrived:





Trial fitted:







Also fitted my rear diffuser...




More pics to follow

JonMc

iTrader: (51)

Nice, I'm toying with some 17" track wheels in a similar style and colour