Hayward & Scott Group Buy - spaces for extra orders.
I've got most of the Hayward & Scott kit on my car MY02 excluding the headers and catalytic convertor. Two questions:
What effect will the headers have on the sound? Lose the burble and be quieter or slight burble noisier?
Performance. Approximately, what increase in torque would I see and would I have to have the TEK 3 remapped again?
What effect will the headers have on the sound? Lose the burble and be quieter or slight burble noisier?
Performance. Approximately, what increase in torque would I see and would I have to have the TEK 3 remapped again?
Originally Posted by mneame
Cat Pipes (newage)
£75-00 + Vat.
I take it this will fit perfectly between the downpipe and 2.5" centre section? ie this:
http://www.haywardandscott.com/Detai...57&category=13
......and finally who and how do I contact.
Cheers
Gus
Last edited by Gus the Bus; Mar 3, 2006 at 11:21 PM.
Originally Posted by stuntmonkey955
Matt, Please could you check how close we actually were to 10+ on the catted downpipes - I've been through all the posts and I reckon it got 9. If it was 9, I'd be number 10 and I might be able to stretch to one at the 10+ price. I just can't manage £425+VAT at the mo as I will have to pay fitting (Been quoted £90, and I'm too far from H&S).
Originally Posted by Flatcapdriver
I've got most of the Hayward & Scott kit on my car MY02 excluding the headers and catalytic convertor. Two questions:
What effect will the headers have on the sound? Lose the burble and be quieter or slight burble noisier?
Performance. Approximately, what increase in torque would I see and would I have to have the TEK 3 remapped again?
What effect will the headers have on the sound? Lose the burble and be quieter or slight burble noisier?
Performance. Approximately, what increase in torque would I see and would I have to have the TEK 3 remapped again?
Originally Posted by Flatcapdriver
Any chance of an answer?
Ian
Hi Ian,
I'd be very very tempted to go for the jap style angled back box. I have an 03 sti ppp, but am wondering what are the noice levels going to be like for track days. I'm due to have an APS cold feed air filter in the coming weeks.
How much all in am I looking at for the rear box, plus a bung with fitting?
Many thanks
.
Zuby
I'd be very very tempted to go for the jap style angled back box. I have an 03 sti ppp, but am wondering what are the noice levels going to be like for track days. I'm due to have an APS cold feed air filter in the coming weeks.
How much all in am I looking at for the rear box, plus a bung with fitting?
Many thanks
Zuby
sorry guys have been away for a few days. I see that Ian has answered the questions. Sorry for not being around. If you need anything give me a shout.
Zuby - jap back box is £180 + vat at the gb price. The bung has a gb running as well which looks like it will be £30 + vat. Fitting, Ian will have to confirm for you.
Edited to add - the bung should make it fine for track days. Tried mine the other day and it makes it a lot quieter than normal.
cheers,
Matt.
Zuby - jap back box is £180 + vat at the gb price. The bung has a gb running as well which looks like it will be £30 + vat. Fitting, Ian will have to confirm for you.
Edited to add - the bung should make it fine for track days. Tried mine the other day and it makes it a lot quieter than normal.
cheers,
Matt.
Just for info, I phoned Dawn earlier today and placed my order for a decat downpipe, centre pipe and jap style back box for a classic). Having them fitted the weekend after next.
I'm also getting the bung for the back box so I'll add my name to that groupbuy as well.
Cheers!
I'm also getting the bung for the back box so I'll add my name to that groupbuy as well.
Cheers!
cheers rmtyper for taking part in the gb.
can i interest anyone in a set of the h&s headers? at these prices you'd be mad to miss out. i fitted mine yesterday. the noise they give the car is, imo, far better than the usual scooby sound. now i just need the anti lag to go with the rally car style exhaust note, lol. plus the extra horses and torque that you gain are impressive too. must admit though i put a decat downpipe on at the same time so a few more ponies gained there as well. if the arsenal weren't playing tonight i'd go for a rather long drive.
can i interest anyone in a set of the h&s headers? at these prices you'd be mad to miss out. i fitted mine yesterday. the noise they give the car is, imo, far better than the usual scooby sound. now i just need the anti lag to go with the rally car style exhaust note, lol. plus the extra horses and torque that you gain are impressive too. must admit though i put a decat downpipe on at the same time so a few more ponies gained there as well. if the arsenal weren't playing tonight i'd go for a rather long drive.
Right guys, the gb has to come to a final close. The deadline for orders is the end of next week, Friday 17th March. So get any orders in pretty sharpish!!!
Thanks to all for taking part and thank you to Ian at Hayward and Scott for running the group buy.
Matt.
Thanks to all for taking part and thank you to Ian at Hayward and Scott for running the group buy.
Matt.
Originally Posted by Gus the Bus
looking for one of this now I think!?! Is this a delivered price or is there carriage on top?
I take it this will fit perfectly between the downpipe and 2.5" centre section? ie this:
http://www.haywardandscott.com/Detai...57&category=13
......and finally who and how do I contact.
Cheers
Gus
I take it this will fit perfectly between the downpipe and 2.5" centre section? ie this:
http://www.haywardandscott.com/Detai...57&category=13
......and finally who and how do I contact.
Cheers
Gus

How much cheaper is this than the normal price?
Originally Posted by MadMark
How much cheaper is this than the normal price? 


dunno if ya got new age or classic but this is price from a classicfrom £205 to £135
make sense dunnit , ya know ya want one!!


Originally Posted by MadMark
And I'd like one too! Discount for 2? 
How much cheaper is this than the normal price?

How much cheaper is this than the normal price?

gb price is £88.13 inc the vat. standard website price is £105.75 inc vat.
Originally Posted by mneame
take it that you have a new age?
gb price is £88.13 inc the vat. standard website price is £105.75 inc vat.
gb price is £88.13 inc the vat. standard website price is £105.75 inc vat.

Is the New Age Sports Cat down pipe part of the GB and does it replace both Cats? (So I wouldn't need the above as well)?
Cheers,
MM
Last edited by MadMark; Mar 9, 2006 at 04:01 PM.
i'm sure that Ian said that they now do a sports cat that removes the cat in the downpipe and the one in the centre section. This was in the group buy as well.
Ian can you confirm if above is correct and a price for Mark.
Thanks,
Matt.
Ian can you confirm if above is correct and a price for Mark.
Thanks,
Matt.
Originally Posted by MadMark
Thanks Matt and I eagerly look forward to Ian's price .... 
I wonder if it does much to the performance .....


I wonder if it does much to the performance .....

y naseem - added you to the list. call h&s on 01268 727256 and arrange payment, delivery / collection etc.
Benrb5 - Headers - tbc
Jasonl - decat dp - paid - received
Meridian - One piece cat dp and second cat removal
swtmerce - centre section and cat pipe
DavemUK - decat dp
Tripple OG - decat dp - due to be fitted 02/03/06
Rentonone - Custom BB?
Stuntmonkey955 - Decat dp, Decat centre, Jap BB - tbc
ynaseem - decat dp and decat centre section
Benrb5 - Headers - tbc
Jasonl - decat dp - paid - received
Meridian - One piece cat dp and second cat removal
swtmerce - centre section and cat pipe
DavemUK - decat dp
Tripple OG - decat dp - due to be fitted 02/03/06
Rentonone - Custom BB?
Stuntmonkey955 - Decat dp, Decat centre, Jap BB - tbc
ynaseem - decat dp and decat centre section
madmark - post number 27 has the answer.
To save money we now do a one piece down pipe that removes both cats and will link directly on to your centre.With a cat this costs( GB price ) £450 +vat The pipe is 3" and is coned down gradually at the end to 2.5".To order and pay if you can ring Dawn ( 10 -2 ) and give her your details .
Thank you
Ian
To save money we now do a one piece down pipe that removes both cats and will link directly on to your centre.With a cat this costs( GB price ) £450 +vat The pipe is 3" and is coned down gradually at the end to 2.5".To order and pay if you can ring Dawn ( 10 -2 ) and give her your details .
Thank you
Ian
Originally Posted by mneame
a 100 cel sports cat dp only has a 2 bhp deficet over a decat dp.
- My 03 WRX has been RR'd (G-Force & P.E) at 260bhp and 245lb/ft torque with just a Green Cotton filter, H&S Centre pipe and Prodrive Backbox - so it would be interesting to see what a bigger cat'd DP would do ....
Originally Posted by mneame
y naseem - added you to the list. call h&s on 01268 727256 and arrange payment, delivery / collection etc.
Benrb5 - Headers - tbc
Jasonl - decat dp - paid - received
Meridian - One piece cat dp and second cat removal
swtmerce - centre section and cat pipe
DavemUK - decat dp
Tripple OG - decat dp - due to be fitted 02/03/06
Rentonone - Custom BB?
Stuntmonkey955 - Decat dp, Decat centre, Jap BB - tbc
ynaseem - decat dp and decat centre section
Benrb5 - Headers - tbc
Jasonl - decat dp - paid - received
Meridian - One piece cat dp and second cat removal
swtmerce - centre section and cat pipe
DavemUK - decat dp
Tripple OG - decat dp - due to be fitted 02/03/06
Rentonone - Custom BB?
Stuntmonkey955 - Decat dp, Decat centre, Jap BB - tbc
ynaseem - decat dp and decat centre section
Originally Posted by mneame
madmark - post number 27 has the answer.
To save money we now do a one piece down pipe that removes both cats and will link directly on to your centre.With a cat this costs( GB price ) £450 +vat The pipe is 3" and is coned down gradually at the end to 2.5".To order and pay if you can ring Dawn ( 10 -2 ) and give her your details .
Thank you
Ian
To save money we now do a one piece down pipe that removes both cats and will link directly on to your centre.With a cat this costs( GB price ) £450 +vat The pipe is 3" and is coned down gradually at the end to 2.5".To order and pay if you can ring Dawn ( 10 -2 ) and give her your details .
Thank you
Ian
Thanks! Funny thing is that I've seen it advertised in Evo Magazine - but it's not listed on the H&S Website.


