BREAKING...my98 wrx wagon
Thread Starter
Scooby Regular
Joined: Dec 2002
Posts: 308
Likes: 0
From: Molesey, surrey
911, sent you a PM but still waiting for some kind of a reply lol. You still after the scoop? Also, which one did you want? I have 2 scoops, both painted 406 silver, but one is an early type (my92-my96), and the other is for a face lifted classic (my97-my2000)
Scooby Newbie
Joined: Apr 2005
Posts: 8
Likes: 0
Im after the follwing parts:
95 WRX SPEEDO CLOCK to fit a 95wrx.Must have 180mph on speedo and have rpm up to 9000rpm.Cash waiting must be reasonable price and good working order.
Also Im after a standard twin tailpipe system cat back for a wrx 95 import.
I am based in Lancashire so can collect if local.But if you can post I can arrange a courrier.Please email me if you can help or ring me anytime on 07891726938
Andy
95 WRX SPEEDO CLOCK to fit a 95wrx.Must have 180mph on speedo and have rpm up to 9000rpm.Cash waiting must be reasonable price and good working order.
Also Im after a standard twin tailpipe system cat back for a wrx 95 import.
I am based in Lancashire so can collect if local.But if you can post I can arrange a courrier.Please email me if you can help or ring me anytime on 07891726938
Andy
Scooby Newbie
Joined: Jun 2004
Posts: 17
Likes: 0
From: worcestershire
Originally Posted by wible
I have a few bits up for grabs from this car and will accept reasonable offers:-
1:
Engine (phase 1.5)(has damage to the valves in cylinder No.1 due to the belt jumping a few teeth, but easy to repair. Its covered approx 50,000 miles, and does not have any ancilleries on it,its just the block+2 heads)
2:
2x 16" 5 spoke subaru wheels
3:
O/S/R door complete (painted 406 silver)
4:
N/S/R door complete (406 silver)
5:
Tailgate complete but glass broken (406 silver)
6:
ECU
7:
Rear diff
8:
Rear drive shafts
9:
Front drive shafts
10:
Prop shaft
11:
ABS control unit (sits infront of the air filter housing)
12:
Bonnet vents (406 silver)
13:
Complete exsaust including both cats
14:
Standard air filter housing (maf not included)
Also,i have the following from a my95 WRX saloon:-
1:
Complete interior including door panels (minute cigarette mark in the corner of the lower rear seat but not noticable)
2:
Dash+most fittings and switches etc
3:
Bonnet scoop (406 silver)
4:
Front bumper cover (some paintwork damage)
5:
Standard steering wheel (my95)
6:
Heater control unit (my95)
7:
Steering column (my95) (no ignition lock or housing)
8:
Air conditioning compresser
1:
Engine (phase 1.5)(has damage to the valves in cylinder No.1 due to the belt jumping a few teeth, but easy to repair. Its covered approx 50,000 miles, and does not have any ancilleries on it,its just the block+2 heads)
2:
2x 16" 5 spoke subaru wheels
3:
O/S/R door complete (painted 406 silver)
4:
N/S/R door complete (406 silver)
5:
Tailgate complete but glass broken (406 silver)
6:
ECU
7:
Rear diff
8:
Rear drive shafts
9:
Front drive shafts
10:
Prop shaft
11:
ABS control unit (sits infront of the air filter housing)
12:
Bonnet vents (406 silver)
13:
Complete exsaust including both cats
14:
Standard air filter housing (maf not included)
Also,i have the following from a my95 WRX saloon:-
1:
Complete interior including door panels (minute cigarette mark in the corner of the lower rear seat but not noticable)
2:
Dash+most fittings and switches etc
3:
Bonnet scoop (406 silver)
4:
Front bumper cover (some paintwork damage)
5:
Standard steering wheel (my95)
6:
Heater control unit (my95)
7:
Steering column (my95) (no ignition lock or housing)
8:
Air conditioning compresser
Thread Starter
Scooby Regular
Joined: Dec 2002
Posts: 308
Likes: 0
From: Molesey, surrey
Ashperwez, i dont have an engine for a my95, only for a my98. have you blown yours? I am trying to source some my95 pistons, so would be interested in buying your blown one if you wanna sell it?
Unclescooby, the only speedo i have from a my95 has 110mph clocks,but the face from yours will fit on to these and will read the correct speed. Yours will have a little converter in the cable to down gear the display,whereas the 110mph dont.
I also have an exsaust system (standard twin tail), off of a my98 wagon, however,the saloons and wagons share the same exsausts irrelivent of model and year. Its in good condition, and i can arrange to post if need be?
You can have both for £135+p/p ovno
Scoobynut, i dont have a rad mate,sorry
Unclescooby, the only speedo i have from a my95 has 110mph clocks,but the face from yours will fit on to these and will read the correct speed. Yours will have a little converter in the cable to down gear the display,whereas the 110mph dont.
I also have an exsaust system (standard twin tail), off of a my98 wagon, however,the saloons and wagons share the same exsausts irrelivent of model and year. Its in good condition, and i can arrange to post if need be?
You can have both for £135+p/p ovno
Scoobynut, i dont have a rad mate,sorry
Thread Starter
Scooby Regular
Joined: Dec 2002
Posts: 308
Likes: 0
From: Molesey, surrey
Kittle, i have 2 to choose from (both early ones, 1 white,1 blue). They will need painting though, so colour is pretty irrelivent i guess. I would like £50 for either of them and i am in west london/surrey (richmond).
Scooby Newbie
Joined: Apr 2005
Posts: 13
Likes: 0
Do you still have the steering wheel from the 95?
Is it a Nardi?
To fit a 97 (came with a nasty airbag bus sized steering wheel) do I need your column? I have heard these Nardi steering wheels do not fit stright on even with boss that is fitted to Nardi wheel.
Something to do with the stalks for the indicators / wipers being affected.
If the column from your 95 will cover this problem, I will take both if I may.
David
Is it a Nardi?
To fit a 97 (came with a nasty airbag bus sized steering wheel) do I need your column? I have heard these Nardi steering wheels do not fit stright on even with boss that is fitted to Nardi wheel.
Something to do with the stalks for the indicators / wipers being affected.
If the column from your 95 will cover this problem, I will take both if I may.
David
Scooby Newbie
Joined: Apr 2005
Posts: 13
Likes: 0
Originally Posted by DW1
Do you still have the steering wheel from the 95?
Is it a Nardi?
To fit a 97 (came with a nasty airbag bus sized steering wheel) do I need your column? I have heard these Nardi steering wheels do not fit stright on even with boss that is fitted to Nardi wheel.
Something to do with the stalks for the indicators / wipers being affected.
If the column from your 95 will cover this problem, I will take both if I may.
David
Is it a Nardi?
To fit a 97 (came with a nasty airbag bus sized steering wheel) do I need your column? I have heard these Nardi steering wheels do not fit stright on even with boss that is fitted to Nardi wheel.
Something to do with the stalks for the indicators / wipers being affected.
If the column from your 95 will cover this problem, I will take both if I may.
David
If you have the above, perhaps I could arrange to come over your way for the parts I need?
Also interested in the centre arm rest if your 95 WRX has one - I know some did and some didn't.
Thanks
David
Scooby Regular
Joined: Mar 2005
Posts: 269
Likes: 0
bumper
Originally Posted by wible
Kittle, i have 2 to choose from (both early ones, 1 white,1 blue). They will need painting though, so colour is pretty irrelivent i guess. I would like £50 for either of them and i am in west london/surrey (richmond).
pm me. 
Thread Starter
Scooby Regular
Joined: Dec 2002
Posts: 308
Likes: 0
From: Molesey, surrey
Sorry for the delay everyone, i have moved home and as a result been un-able to get web access
I have replied to ALL pm's and have included my phone number,as i wont be online properly for some time yet.
For those that have not pm'd me, my phone no. is 07957 111 212, so if you need to enquire after parts, please call me.
Ta
I have replied to ALL pm's and have included my phone number,as i wont be online properly for some time yet.
For those that have not pm'd me, my phone no. is 07957 111 212, so if you need to enquire after parts, please call me.
Ta
Thread Starter
Scooby Regular
Joined: Dec 2002
Posts: 308
Likes: 0
From: Molesey, surrey
Sparky N and Mr Wid, i still have the engine and the cams. Please call me on 07957 111 212 if you still need,i dont get on here very often at the mo,hense the delay in replying to you both.
Ta
Ta
