Knocklink group buy
Scooby Regular
Joined: Apr 2002
Posts: 7,333
Likes: 0
From: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Just a word of advice (if anyone can see my posts :rolleyes) I would open the KL Display up and check the wiring thoroughly. There have been loads lately that have had some minor wiring issues and the important red lights weren't working.
MB
MB
Thread Starter
Scooby Regular
iTrader: (5)
Joined: Feb 2004
Posts: 5,387
Likes: 0
From: S E London........ 555 Wagon Sqn
Originally Posted by BRIAN "H"
At last i feel safe now.Got mine this morning.
Thanks again to Granby and Branko, this is how a group buy should be run.
A++++++++
Thanks again to Granby and Branko, this is how a group buy should be run.
A++++++++
Originally Posted by BRIAN "H"
Got mine in the car now. I didnt have to worry after all about det cause i only get one green showing when i boot it.Brilliant.
Originally Posted by Dark Blue Mark
Just a word of advice (if anyone can see my posts :rolleyes) I would open the KL Display up and check the wiring thoroughly. There have been loads lately that have had some minor wiring issues and the important red lights weren't working.
MB
MB
Scooby Regular
Joined: May 2004
Posts: 92
Likes: 0
From: Fleetwood, Lancashire
[QUOTE=Granby]
That didn't take you long, now was it to fit
It was so easy to fit took about 20 minutes.You dont have to take the intercooler off , just remove the 3 bolts holding it in place and you can get your hand in to fit the sensor.
That didn't take you long, now was it to fit
It was so easy to fit took about 20 minutes.You dont have to take the intercooler off , just remove the 3 bolts holding it in place and you can get your hand in to fit the sensor.
Thread Starter
Scooby Regular
iTrader: (5)
Joined: Feb 2004
Posts: 5,387
Likes: 0
From: S E London........ 555 Wagon Sqn
Originally Posted by AndyScoobs
Are you supposed to get the bolt with the kit to hold the sensor on. If so I haven't. If not what bolt will I need.
Cheers
Andy
Cheers
Andy
Thread Starter
Scooby Regular
iTrader: (5)
Joined: Feb 2004
Posts: 5,387
Likes: 0
From: S E London........ 555 Wagon Sqn
Originally Posted by wrx
Has everyone had thiers as I've heard nothing yet and am very worried now?
Granby
Scooby Regular
Joined: Jan 2002
Posts: 2,746
Likes: 0
From: A lot closer than you think...
Originally Posted by Dark Blue Mark
Just a word of advice (if anyone can see my posts :rolleyes) I would open the KL Display up and check the wiring thoroughly. There have been loads lately that have had some minor wiring issues and the important red lights weren't working.
MB
MB
Thread Starter
Scooby Regular
iTrader: (5)
Joined: Feb 2004
Posts: 5,387
Likes: 0
From: S E London........ 555 Wagon Sqn
Just a word of warning about mounting the LED's in the dash, if you mount them like below
http://forums.sidc.co.uk/attachments...nk%5F001%2Ejpg
or
http://img20.photobucket.com/albums/...by/klsmall.jpg
you won't be able to see the red LED light up as it has a very narrow viewing angle, you could change the LED or mount the red LED so you can see it head on.
Cheers
Granby
http://forums.sidc.co.uk/attachments...nk%5F001%2Ejpg
or
http://img20.photobucket.com/albums/...by/klsmall.jpg
you won't be able to see the red LED light up as it has a very narrow viewing angle, you could change the LED or mount the red LED so you can see it head on.
Cheers
Granby
Scooby Regular
Joined: Sep 2003
Posts: 1,472
Likes: 0
From: SMACS member,Resident valeter/pc installer
I have some pics of the knocklink leds on extention leads if anyone is interested.
I will do the conversion if anyone wants.
£30 inc P and P, fully tested and sent recorded delivery.
Pm me if anyone is interested.
*****
I will do the conversion if anyone wants.
£30 inc P and P, fully tested and sent recorded delivery.
Pm me if anyone is interested.
*****
Thread Starter
Scooby Regular
iTrader: (5)
Joined: Feb 2004
Posts: 5,387
Likes: 0
From: S E London........ 555 Wagon Sqn
Originally Posted by *****
I have some pics of the knocklink leds on extention leads if anyone is interested.
I will do the conversion if anyone wants.
£30 inc P and P, fully tested and sent recorded delivery.
Pm me if anyone is interested.
*****
I will do the conversion if anyone wants.
£30 inc P and P, fully tested and sent recorded delivery.
Pm me if anyone is interested.
*****
Granby
Scooby Regular
Joined: Sep 2003
Posts: 1,472
Likes: 0
From: SMACS member,Resident valeter/pc installer
Cheers Granby,
here is the finished item link
It will be despached in a bubble wrap package and then a Jiffy bag.
I will personally test the knocklink in my car prior to shipping.
*****
here is the finished item link
It will be despached in a bubble wrap package and then a Jiffy bag.
I will personally test the knocklink in my car prior to shipping.
*****
Joined: Feb 2001
Posts: 4,124
Likes: 13
From: Kent in a 396bhp Scoob/Now SOLD!
Originally Posted by Dark Blue Mark
Just a word of advice (if anyone can see my posts :rolleyes) I would open the KL Display up and check the wiring thoroughly. There have been loads lately that have had some minor wiring issues and the important red lights weren't working.
MB
MB
On max sensitivity a tap on the head of the bolt with a socket extension (not too hard) should say 'toast'
Thread Starter
Scooby Regular
iTrader: (5)
Joined: Feb 2004
Posts: 5,387
Likes: 0
From: S E London........ 555 Wagon Sqn
Just thought i would show everyone my install of the knocklink display
http://img.photobucket.com/albums/v1...inkDisplay.jpg
I decided that i didn't like the original box that the LED's were mounted in as it was too big and bulky so i put some new LED's in a smaller box, I've put the new box by the ashtray but it could be mounted anywhere, now before anyone asks I'm not gonna do anymore as it was a real pain in the **** to do
If anyone want's to do this themself i can give them the part numbers of the bits they need from the Maplin catalogue , or you can send them to ***** (reply below) and he will extend the wires for the LED's but you will still have to fit them where you want or in a new box like i did
Granby
http://img.photobucket.com/albums/v1...inkDisplay.jpg
I decided that i didn't like the original box that the LED's were mounted in as it was too big and bulky so i put some new LED's in a smaller box, I've put the new box by the ashtray but it could be mounted anywhere, now before anyone asks I'm not gonna do anymore as it was a real pain in the **** to do
If anyone want's to do this themself i can give them the part numbers of the bits they need from the Maplin catalogue
, or you can send them to ***** (reply below) and he will extend the wires for the LED's but you will still have to fit them where you want or in a new box like i did Granby
Last edited by Granby; Sep 24, 2004 at 11:04 AM.
Scooby Regular
Joined: Sep 2003
Posts: 1,472
Likes: 0
From: SMACS member,Resident valeter/pc installer
Point them in my direction lol
Looks loads better than the original box.
I`ll post some pics of mine fitted soon.
Dont forget...£30 and I`ll extend leds and test, recorded delivery within 2-3 days max.
*****
Looks loads better than the original box.
I`ll post some pics of mine fitted soon.
Dont forget...£30 and I`ll extend leds and test, recorded delivery within 2-3 days max.
*****
Thread Starter
Scooby Regular
iTrader: (5)
Joined: Feb 2004
Posts: 5,387
Likes: 0
From: S E London........ 555 Wagon Sqn
Originally Posted by Granby
Just thought i would show everyone my install of the knocklink display
http://img.photobucket.com/albums/v1...inkDisplay.jpg
I decided that i didn't like the original box that the LED's were mounted in as it was too big and bulky so i put some new LED's in a smaller box, I've put the new box by the ashtray but it could be mounted anywhere, now before anyone asks I'm not gonna do anymore as it was a real pain in the **** to do
If anyone want's to do this themself i can give them the part numbers of the bits they need from the Maplin catalogue , or you can send them to ***** (reply below) and he will extend the wires for the LED's but you will still have to fit them where you want or in a new box like i did
Granby
http://img.photobucket.com/albums/v1...inkDisplay.jpg
I decided that i didn't like the original box that the LED's were mounted in as it was too big and bulky so i put some new LED's in a smaller box, I've put the new box by the ashtray but it could be mounted anywhere, now before anyone asks I'm not gonna do anymore as it was a real pain in the **** to do
If anyone want's to do this themself i can give them the part numbers of the bits they need from the Maplin catalogue
, or you can send them to ***** (reply below) and he will extend the wires for the LED's but you will still have to fit them where you want or in a new box like i did Granby
http://img.photobucket.com/albums/v...inkDisplay2.jpg
to make it fit nice & snug i put some sticky Velcro on each side of the box and it now fits lovely (i did put it on top of the steering column but it looked CRAP).
Granby
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
