Hull Scoobs sign in please
Originally Posted by CustomScoobyIOM
Cool can ya take the heads off the Jag then mate?! Looks like it has bent a valve. Though not sure how due to tensioners are still all ok and timing chain is fine..... 

its proberbly the flumux valve,which is a common problem the jag engine.
the flumux valve is fastened to the underside of the widgetty-grubb holder.
but dont forget NOT to take out the female flumux or the male flumux BUT the junior or adopted flumux valve!
you will need some special tools...
like a shiney-****e remover,a peruvian drill bit(i have one) and the official jaguar "made awkward for no dam reason" thingy-me-bob.
its best to get at the engine via the wing...if you drive the car along a sharp gate post...leaving an almost surgon like insicion cut of about 12inches by 3 inches.this allows access to the part on the engine you have problems with.
after fixing...just use some top quality tank tape.again i have some if you need it..but mines in subaru silver.but would be easy for me to crayon to match your jag colour when on the car for best match.
sorry to all the non technicals on the hull thread who wont understand.
hope this helps?
call me if you need it doing?
ads
fpmsl
Originally Posted by new boy
its proberbly the flumux valve,which is a common problem the jag engine.
the flumux valve is fastened to the underside of the widgetty-grubb holder.
but dont forget NOT to take out the female flumux or the male flumux BUT the junior or adopted flumux valve!
you will need some special tools...
like a shiney-****e remover,a peruvian drill bit(i have one) and the official jaguar "made awkward for no dam reason" thingy-me-bob.
its best to get at the engine via the wing...if you drive the car along a sharp gate post...leaving an almost surgon like insicion cut of about 12inches by 3 inches.this allows access to the part on the engine you have problems with.
after fixing...just use some top quality tank tape.again i have some if you need it..but mines in subaru silver.but would be easy for me to crayon to match your jag colour when on the car for best match.
sorry to all the non technicals on the hull thread who wont understand.
hope this helps?
call me if you need it doing?
ads
the flumux valve is fastened to the underside of the widgetty-grubb holder.
but dont forget NOT to take out the female flumux or the male flumux BUT the junior or adopted flumux valve!
you will need some special tools...
like a shiney-****e remover,a peruvian drill bit(i have one) and the official jaguar "made awkward for no dam reason" thingy-me-bob.
its best to get at the engine via the wing...if you drive the car along a sharp gate post...leaving an almost surgon like insicion cut of about 12inches by 3 inches.this allows access to the part on the engine you have problems with.
after fixing...just use some top quality tank tape.again i have some if you need it..but mines in subaru silver.but would be easy for me to crayon to match your jag colour when on the car for best match.
sorry to all the non technicals on the hull thread who wont understand.
hope this helps?
call me if you need it doing?
ads
just fixing a train network problem at the moe..planning layout travel direction etc.
these ikea toys for my daughter!..so it couldnt be today.
sundays no good..fixing wallaces car for well lane 10.
monday...heping andy f plan his new car.
tuesday?
ads
these ikea toys for my daughter!..so it couldnt be today.
sundays no good..fixing wallaces car for well lane 10.
monday...heping andy f plan his new car.
tuesday?
ads
Originally Posted by Trickie
Ads have been on the sauce
PMSL mate..
I never new you were so technical
PMSL mate..
I never new you were so technical
anyway..i was asked a few days ago to be technical moderator.
they admitted they hadnt come accross a mind like mine!(well something along those lines)
i said too busy..unless i had a "troubleshooting problem solving" Mod role.
thay said theyd get back to me.
Scooby Regular
Joined: Jan 2004
Posts: 402
Likes: 0
From: panda i feel like chiken tonight pick on the endangered 1
Originally Posted by TYP 3R
going to spy on a secret meeting tonite
Scooby Regular
Joined: Jan 2004
Posts: 402
Likes: 0
From: panda i feel like chiken tonight pick on the endangered 1
Originally Posted by Stiff
And not forgetting the obligitory rolling up of the trouser leg. 

colby my be in trouble with that 1 as he`s to small to call it hanging
Just took me 10 mins to get out of Stevehulluk's street.
Riot cops, vans, marked and unmarked cars, blue flashing lights everywhere. Helicopter buzzing above with searchlight beaming down. More riot vans, flahing blue lights etc under Sully way bridge.
No sign of any Scoobs though.
Riot cops, vans, marked and unmarked cars, blue flashing lights everywhere. Helicopter buzzing above with searchlight beaming down. More riot vans, flahing blue lights etc under Sully way bridge.
No sign of any Scoobs though.
Scooby Regular
Joined: Jan 2004
Posts: 402
Likes: 0
From: panda i feel like chiken tonight pick on the endangered 1
Originally Posted by Stiff
Just took me 10 mins to get out of Stevehulluk's street.
Riot cops, vans, marked and unmarked cars, blue flashing lights everywhere. Helicopter buzzing above with searchlight beaming down. More riot vans, flahing blue lights etc under Sully way bridge.
No sign of any Scoobs though. 
Riot cops, vans, marked and unmarked cars, blue flashing lights everywhere. Helicopter buzzing above with searchlight beaming down. More riot vans, flahing blue lights etc under Sully way bridge.
No sign of any Scoobs though. 
Scooby Regular
Joined: Jan 2004
Posts: 402
Likes: 0
From: panda i feel like chiken tonight pick on the endangered 1
Originally Posted by TYP 3R
tell me about it!!! she has a cold too and i know its not gona be the best of weather tommorow. hope you all enjoy it..
can`t wait



