******** BUGEYE CORNER!!! ********
Hows your power now?
Was very similar to your beaut, 275-280 with 265 lbs.ft consistently with the PPP and HKS AFR controller. Now Bob Rawle has waved his wand over the ECU **** Knows
All I know is that it pulls like a train and goes like stink. What turbo are you getting ?
Mail me if you want to keep it off the boards. May well start again soon with a JDM STi9 Looking at the new Type RA limited in Red
Will be looking for 400bhp if I go this route 
Nathan..
I got the A-pillar pod and gauges from Nomad Racing . The alarm sensor on mine sits at the top of the pillar.
The orange globes have been removed from the headlights. You have to remove them from the car, bake evenly in the oven for 20mins on very low heat, pull them apart, remove the globe and build before the glue sets hard again. I then replaced the clear bulbs with silver vision bulbs. Scary but quite easy really.
Steve
The orange globes have been removed from the headlights. You have to remove them from the car, bake evenly in the oven for 20mins on very low heat, pull them apart, remove the globe and build before the glue sets hard again. I then replaced the clear bulbs with silver vision bulbs. Scary but quite easy really.
Steve
Hi Nathan
Was gonna go for a MD304 from Lateral Performance but i've decided to go for the TD05/06 from Lateral cos its bigger
should spool near enough the same too 
Should be good for 380bhp but i think i will need a gearbox soon
Scott
Was gonna go for a MD304 from Lateral Performance but i've decided to go for the TD05/06 from Lateral cos its bigger
should spool near enough the same too 
Should be good for 380bhp but i think i will need a gearbox soon

Scott
Mick WRX. I picked up my lights on here second hand a month or so ago. Had been looking since the STi7 came out. Fitting was pretty simple if you have the connectors, no need to snip the loom. There are plenty of threads on the subject over in electrical forums here and on http://www.nasioc.com
Getting the electrical height adjustment to work was too tricky for me to bother, but can be done.
Getting the electrical height adjustment to work was too tricky for me to bother, but can be done.
Steve S.
Well done! If you ever go round Mick Wrx's for dinner you'll understand that telling Mick to use the oven is a mistake.
Anyone got some replacements for mick, he will proberly need them in,,,, say by the end of the weekend.
Happy cooking Mick
p.s. This does not mean you can warm them up on the barbey.
Adam
[Edited by rb5037 - 5/31/2003 9:50:53 AM]
Well done! If you ever go round Mick Wrx's for dinner you'll understand that telling Mick to use the oven is a mistake.
Anyone got some replacements for mick, he will proberly need them in,,,, say by the end of the weekend.
Happy cooking Mick
p.s. This does not mean you can warm them up on the barbey.

Adam
[Edited by rb5037 - 5/31/2003 9:50:53 AM]
























