my sti replacement, erm an impreza
#43
Well bit of an update over Christmas.
Ive sold the plate off the car to the original owner, this has allowed me to buy a roof flap,
Next up i found out that the discs are now warped on the d2's so they have gone and been replaced with brembo calipers and discs,
With it being my birthday 1st of jan, i asked for money.
With that i got a jdm grille, some hella horns and a pink badge haha
Ive sold the plate off the car to the original owner, this has allowed me to buy a roof flap,
Next up i found out that the discs are now warped on the d2's so they have gone and been replaced with brembo calipers and discs,
With it being my birthday 1st of jan, i asked for money.
With that i got a jdm grille, some hella horns and a pink badge haha
#46
#53
Well the car is back on the xxr.
Turns out the rota gra i swapped for were inovit tarmacs, got back in touch with the guy a d swapped back.
Having to run a small 3mm spacer to clear the new brembos, as these wheels are a smaller offset.
Plus side the brembo are now black
Turns out the rota gra i swapped for were inovit tarmacs, got back in touch with the guy a d swapped back.
Having to run a small 3mm spacer to clear the new brembos, as these wheels are a smaller offset.
Plus side the brembo are now black
#57
Got a shed load done on the car today.
Fitting of a spec c roof flap
Now alot of people use frayz guide, which is great. But there is one piece of miss information.
Once your lining is down, he says to remove this part.
*
But infact the bracket for the roof vent uses this for centring and strength.
*
See how the screws that held the map lights in, now hold the frame, after this you can bolt the other two holes
*
Then you cam centre punch all your holes and get the drill out.
*
*
Dopily i forgot pics for the hole!!!
But the rest is per guide,
The inside
*
And out.
*
Next thing was to remove the old grille to fit my hella horns, and jdm grille.
Also took the bit kf dash our were then flock had flacked amd blacked that.
After that i took the gear **** off, cut the leaver down by about an inch and installed a new ****
*
Final pics
*
*
Jake
Fitting of a spec c roof flap
Now alot of people use frayz guide, which is great. But there is one piece of miss information.
Once your lining is down, he says to remove this part.
*
But infact the bracket for the roof vent uses this for centring and strength.
*
See how the screws that held the map lights in, now hold the frame, after this you can bolt the other two holes
*
Then you cam centre punch all your holes and get the drill out.
*
*
Dopily i forgot pics for the hole!!!
But the rest is per guide,
The inside
*
And out.
*
Next thing was to remove the old grille to fit my hella horns, and jdm grille.
Also took the bit kf dash our were then flock had flacked amd blacked that.
After that i took the gear **** off, cut the leaver down by about an inch and installed a new ****
*
Final pics
*
*
Jake