When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
No. 2x torques bit screws on the rear of the airbag holding that onto the wheel, few connections under that for the bag, big nut in the middle and it's all off.
Just make sure you completely disconnect the battery and once you've done that hold down the brake pedal to drain any residual power just to ensure the airbag can't fire by accident, which I'm glad to report shouldn't anyhow.
Anyone got a pic of the blob sti airbag fitted to this wheel?
Widetrack? If you're intending to fit one to a non-widetrack blob you will need to get a widetrack STI airbag to suit. They don't take the earlier airbags.
Plenty of pics on this thread showing these with widetrack airbags fitted.
Widetrack? If you're intending to fit one to a non-widetrack blob you will need to get a widetrack STI airbag to suit. They don't take the earlier airbags.
Plenty of pics on this thread showing these with widetrack airbags fitted.
Just got myself a DAMD wheel that I intend to fit to my 2003 non-widetrack blob.
I realize I need to get the widetrack airbag unit to fit, but what about the clock spring? Does it need to be changed too?
I'm wondering whether the airbag connector will fit or not.
Just got myself a DAMD wheel that I intend to fit to my 2003 non-widetrack blob.
I realize I need to get the widetrack airbag unit to fit, but what about the clock spring? Does it need to be changed too?
I'm wondering whether the airbag connector will fit or not.
just airbag needed if it is sti, clockspring is the same
wrx momo airbag connector is different and form sti will be needed
Just got myself a DAMD wheel that I intend to fit to my 2003 non-widetrack blob.
I realize I need to get the widetrack airbag unit to fit, but what about the clock spring? Does it need to be changed too?
I'm wondering whether the airbag connector will fit or not.
Where'd you get it mate? Second hand or from a trader? I'm after one myself, been waiting a while but they don't come up very often.
Where'd you get it mate? Second hand or from a trader? I'm after one myself, been waiting a while but they don't come up very often.
Binny
Imported an used one from Japan.
I believe I may have got an earlier revision though of some sort.
Looking at the pics posted here, the leather appears to be matte/dark grey on these DAMD wheels. Mine however is more on the shiny/plain black side, similar to the OEM wheels.
Another difference is that the top and bottom parts are texturized on mine instead of being smooth.
This:
Compared to this:
That's definately not down to wear, so I'm guessing there have been different revisions.
Imported an used one from Japan.
I believe I may have got an earlier revision though of some sort.
Looking at the pics posted here, the leather appears to be matte/dark grey on these DAMD wheels. Mine however is more on the shiny/plain black side, similar to the OEM wheels.
Another difference is that the top and bottom parts are texturized on mine instead of being smooth.
This:
Looks very similar to mine (puchased in 2011) after 7 years of wear and tear.
When new..............
Being black it goes with the MY11 onwards trim of the Hatch and Saloon as against the earlier models grey or "off black"
Corrected: My DAMD wheel now looks a little bit the one you imported. They will go like that after a while, as leather will eventually polish up with use. Mine is an every day car and have used the DAMD wheel for 3 years now. Still amazing, wouldn't drive another Subaru without one!
I would say that the wheel you got has had a LOT of use. Either that or it's a fake.
Pics of mine after 3 years of constant use:
Last edited by BrownPantsRacing; 20 April 2018 at 11:26 AM.
One question: the plastic cover that goes on the back of the steering wheel, does it also have to be off the Hawk/Facelift models or will the 2003 blobeye one (pre-widetrack) fit?
One question: the plastic cover that goes on the back of the steering wheel, does it also have to be off the Hawk/Facelift models or will the 2003 blobeye one (pre-widetrack) fit?
£430 Delivered - SS358-Z - Subaru BRZ, Toyota GT86
Contact us if you want to get your hands on one of these. Very easy to fit and a straight swap with the original wheel and you reuse and keep your air bag to keep you safe.
14 February 2018, 04:27 PM
