Rota Grid Drift on 2008 WRX Hatch
#1
Scooby Regular
Thread Starter
Join Date: Nov 2015
Location: east sussex
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Rota Grid Drift on 2008 WRX Hatch
Looking at fittings some Rota Grids on my 2008 WRX hatch.
Will I be fine with 18 x 8.5 without any rubbing?
Car isn't lowered yet, but will probably be lowered a little later on.
Will I be fine with 18 x 8.5 without any rubbing?
Car isn't lowered yet, but will probably be lowered a little later on.
#4
Scooby Regular
#5
Scooby Regular
Thread Starter
Join Date: Nov 2015
Location: east sussex
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Is this likely to be OK? 3mm doesn't sound a lot, but could be the difference between rubbing, and not rubbing.
To re-cap, car is 2008 WRX hatch, now lowered 35mm on H&R springs.
Cheers,
Adam.
Trending Topics
#8
Scooby Regular
Thread Starter
Join Date: Nov 2015
Location: east sussex
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Can someone confirm whether stud pattern on a WRX hatch is 5x114 or 5x100?
Messaged a guy selling Prodrive GT1 wheels taken off his 59 plate WRX-S, who says they are 5x100...
Messaged a guy selling Prodrive GT1 wheels taken off his 59 plate WRX-S, who says they are 5x100...
#9
Scooby Regular
#10
Scooby Senior
I'm sure the WRX Hatch are 100pcd... the STi WRX are 114 (like the wide track Hawks)
Thread
Thread Starter
Forum
Replies
Last Post
McGoo
Engine Management and ECU Remapping
17
08 December 2015 01:07 PM