Prodrive Alcon brakes
#1
Scooby Regular
Thread Starter
Prodrive Alcon brakes
Just got some of these.
Looking for some discs, pads and adapters...
If you have anything at all let me know, they can be absolutely any condition for a project I've got going
Many thanks
Looking for some discs, pads and adapters...
If you have anything at all let me know, they can be absolutely any condition for a project I've got going
Many thanks
#4
Scooby Regular
#6
Scooby Regular
Assuming they're just regular two piece rotors Godspeed or Reyland can offer non branded replacements for sub-£300. I've been running the Reyland's on my AP's for the past year and they do the job fine.
Trending Topics
#9
Scooby Regular
#10
Scooby Regular
iTrader: (5)
Ive got prodrive alcons on my scoob. Got some original one piece discs here about half used with some used pads if need be ad spares. Feel free to make a offer.
might even sell the newly refurbished calipers. 2 piece discs and ferodo pads as well if offer is good enough.
might even sell the newly refurbished calipers. 2 piece discs and ferodo pads as well if offer is good enough.
#11
Scooby Regular
Thread Starter
Ive got prodrive alcons on my scoob. Got some original one piece discs here about half used with some used pads if need be ad spares. Feel free to make a offer.
might even sell the newly refurbished calipers. 2 piece discs and ferodo pads as well if offer is good enough.
might even sell the newly refurbished calipers. 2 piece discs and ferodo pads as well if offer is good enough.
I've pm'd you buddy
#13
THE braking specialist
iTrader: (259)
The discs that came with the Alcon kits were a one piece disc , and are no longer available , we offer a 2 piece disc and bell which are a direct replacement , and when ours wear down you only need to replace the outer rotor as you will re-use the bells over and over.
We have our discs and bells on offer at the moment for £425 a pair inc vat
http://www.godspeedbrakes.co.uk/impr...ved-discs.html
We can offer various compound pads depending on use , pads start at £95 a set
Cheers Ian
We have our discs and bells on offer at the moment for £425 a pair inc vat
http://www.godspeedbrakes.co.uk/impr...ved-discs.html
We can offer various compound pads depending on use , pads start at £95 a set
Cheers Ian
#14
Scooby Regular
The discs that came with the Alcon kits were a one piece disc , and are no longer available , we offer a 2 piece disc and bell which are a direct replacement , and when ours wear down you only need to replace the outer rotor as you will re-use the bells over and over.
We have our discs and bells on offer at the moment for £425 a pair inc vat
http://www.godspeedbrakes.co.uk/impr...ved-discs.html
We can offer various compound pads depending on use , pads start at £95 a set
Cheers Ian
We have our discs and bells on offer at the moment for £425 a pair inc vat
http://www.godspeedbrakes.co.uk/impr...ved-discs.html
We can offer various compound pads depending on use , pads start at £95 a set
Cheers Ian
#15
Scooby Regular
Thread Starter
The discs that came with the Alcon kits were a one piece disc , and are no longer available , we offer a 2 piece disc and bell which are a direct replacement , and when ours wear down you only need to replace the outer rotor as you will re-use the bells over and over.
We have our discs and bells on offer at the moment for £425 a pair inc vat
http://www.godspeedbrakes.co.uk/impr...ved-discs.html
We can offer various compound pads depending on use , pads start at £95 a set
Cheers Ian
We have our discs and bells on offer at the moment for £425 a pair inc vat
http://www.godspeedbrakes.co.uk/impr...ved-discs.html
We can offer various compound pads depending on use , pads start at £95 a set
Cheers Ian
#16
Scooby Regular
Thread Starter
So far I've done pretty well getting bits together for these
I've sourced discs, pads and a spare set of bells
All I need is brackets if anyone knows of some, even just one side
This is all for a bit of a project I've got going so trying to avoid buying new where possible..For now.
then I'll go ahead and buy new discs and pads
I know of some brackets sat around however the owner won't sell them without selling the callipers. So if anyone knows of a company that can make up some brackets that would be fantastic
I've sourced discs, pads and a spare set of bells
All I need is brackets if anyone knows of some, even just one side
This is all for a bit of a project I've got going so trying to avoid buying new where possible..For now.
then I'll go ahead and buy new discs and pads
I know of some brackets sat around however the owner won't sell them without selling the callipers. So if anyone knows of a company that can make up some brackets that would be fantastic
#17
I would add a set of braided brake lines to your list. When I had all my P1's front brakes upgraded to the Alcon ones, using the Godspeed 2 piece bell and disc, I had a set of stainless braided lines installed at the same time.
Godspeed recommended for me to get some Blue Stuff pads, as I tend to drive my P1 rather spiritedly. Once they get warmed up they are bloody epic and I ended up boiling my brake fluid before the pads wanted to fade on me!
Godspeed recommended for me to get some Blue Stuff pads, as I tend to drive my P1 rather spiritedly. Once they get warmed up they are bloody epic and I ended up boiling my brake fluid before the pads wanted to fade on me!
Thread
Thread Starter
Forum
Replies
Last Post
Lettuce
Wheels, Tyres & Brakes
12
13 March 2016 04:59 PM