G10

When I brake (hard) my wrx hawkeye wagon pulls to the left side, so I think I have a caliper sticking on the front right. I would like to keep the original wrx wheels and am considering the following options.
1. Uprated brakes with spacers - what thickness would I need, would the car still be legal, and would this damage the wheel bearings?
2. Are there any uprated calipers that fit under the standard wheels?
3. Referb on the standard calipers - how much would this cost?
Thanks very much

piehole1983

iTrader: (7)

Probably the usual sticky pistons at work here. You can get a rebuild kit for not too much cash and rebuild them yourself, or have Godspeed or the likes rebuild them for you. A bolt on upgrade would be Brembo calipers and discs from the STI model. They should fit under newage 17" alloy wheels without any issues.

G10

Thanks. I thought for the Brembo calipers I would have to change my wheels from the standard wrx ones?

54 WRX

iTrader: (1)

You will definitely need to change wheels if you put brembo calipers on. V7 sti wheels (5x100) will bolt straight on.

G10

Thanks 54, Do you know of any uprated calipers that will fit under the standard hawkeye wheels?
Ta

piehole1983

iTrader: (7)

Maybe AP 4 pot calipers will fit under standard wheels but they can cost twice as much as Brembo calipers. If you aren't wanting to change wheels, you should put your money in to refurbishing your own calipers and buying decent discs and pads suited to how you use your car.

Tidgy

Check out godspeed offers, got an offer on AP6 pots for about £1250, pretty sure they go under wrx wheels (ask ian) and about as good as you can buy. By the time you have bought the brembos and wheels your gonna be up towards that figure anyway.

Or a set of SCR 6 pots will go under wrx wheels as well iirc


o 17's will take 330mm disks and caliper setup by the way

I;ve got these on my classic but they are under 17's,

Godspeed Brakes

iTrader: (259)

HI
We offer various kits to fit under standard WRX 17" wheels.

Our 335mm kit using the standard calipers which is £550

Our 330mm kit with AP CP6600 4 pot calipers which is £1100

Our 330mm kit with AP 6 pot calipers which is on offer for £1250

We have one K sport 330mm kit which has our own discs and bells which we can offer you at a good price , all brand new for £750 delivered inc NDX bluestuff pads.

Cheers Ian

G10

Thanks Tidgy, I will investigate those options. I hope you didn't take your wheel off especially for this post!

Tidgy

yes, i drove 50 miles, put it up on the ramp, removed the wheel and took the pic then did the reverse,,,,,,

nah, one i took a few weeks back when it was in for some work

G10

I thought you'd set the standard for answering posts on SN.

Tidgy

i try to help folks where i can, alot of rubbish goes round

G10

Ian,
Thanks for your post, I missed it earlier. I've also pinged you an email.
I'll give you a call you tomorrow.
Cheers

winston69

iTrader: (30)

Needing a replacement set, what's available at the moment?

Linksfahrer

Hi Winston,

Just a tip I have Ians 335mm which I used NDX blue , these work well from cold and I find ideal for street . But if you track you will find better Pads ask Ian to advise and throw the pad set in with the Caliper option you eventually go for.