Redditch Scooby's
#277
Scooby Regular
Join Date: Sep 2010
Location: midlands
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
#278
Scooby Regular
Join Date: Sep 2010
Location: midlands
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
#280
Scooby Regular
Thread Starter
Join Date: Jul 2012
Location: Redditch
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
#281
Scooby Regular
Join Date: May 2009
Location: Redditch
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
Forged rebuild with forged pistons and rods, 11mm head stud conversion, race bearings, modified oil pump and stage 2 competition clutch. And a few bits more I can't quite remember.
Basically future proofing it so I have no worries with 2.5 dieing, I told David I wanted 450hp and we came up with this spec as stsge 1. Stage 2 is gonna be 800ish injectors, front mount, oil cooler and sc46. Then obviously remap.
Took longer than expected due to unforeseen circumstances, but on a whole I found their work and service very good. Plus they are all very friendly.
Tom
Forged rebuild with forged pistons and rods, 11mm head stud conversion, race bearings, modified oil pump and stage 2 competition clutch. And a few bits more I can't quite remember.
Basically future proofing it so I have no worries with 2.5 dieing, I told David I wanted 450hp and we came up with this spec as stsge 1. Stage 2 is gonna be 800ish injectors, front mount, oil cooler and sc46. Then obviously remap.
Took longer than expected due to unforeseen circumstances, but on a whole I found their work and service very good. Plus they are all very friendly.
Tom
#282
Scooby Regular
Thread Starter
Join Date: Jul 2012
Location: Redditch
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
Forged rebuild with forged pistons and rods, 11mm head stud conversion, race bearings, modified oil pump and stage 2 competition clutch. And a few bits more I can't quite remember.
Basically future proofing it so I have no worries with 2.5 dieing, I told David I wanted 450hp and we came up with this spec as stsge 1. Stage 2 is gonna be 800ish injectors, front mount, oil cooler and sc46. Then obviously remap.
Took longer than expected due to unforeseen circumstances, but on a whole I found their work and service very good. Plus they are all very friendly.
Tom
Forged rebuild with forged pistons and rods, 11mm head stud conversion, race bearings, modified oil pump and stage 2 competition clutch. And a few bits more I can't quite remember.
Basically future proofing it so I have no worries with 2.5 dieing, I told David I wanted 450hp and we came up with this spec as stsge 1. Stage 2 is gonna be 800ish injectors, front mount, oil cooler and sc46. Then obviously remap.
Took longer than expected due to unforeseen circumstances, but on a whole I found their work and service very good. Plus they are all very friendly.
Tom
#283
Scooby Regular
Join Date: May 2009
Location: Redditch
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
It cost a fair few £££, I think their rebuilds start at £2600 for a basic rebuild, but once spec goes up the price climbs too.
No hatch, grey hawkeye I can usually be seen somewhere between astwood bank (as that's where I live) and my girlfriends in matchbourough.
I'm gonna try and make time to come with you guys to one of the wmi meets this year, only thing is I work all weekend usually.
No hatch, grey hawkeye I can usually be seen somewhere between astwood bank (as that's where I live) and my girlfriends in matchbourough.
I'm gonna try and make time to come with you guys to one of the wmi meets this year, only thing is I work all weekend usually.
#291
Scooby Regular
Thread Starter
Join Date: Jul 2012
Location: Redditch
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
#295
Scooby Regular
Thread Starter
Join Date: Jul 2012
Location: Redditch
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
#297
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM