BEST PLACE TO GET YOUR WHEELS POWDER COATED
#1
Scooby Regular
Thread Starter
Join Date: Feb 2004
Location: SOLD - DIESEL MAN NOW...
Posts: 902
Likes: 0
Received 0 Likes
on
0 Posts
BEST PLACE TO GET YOUR WHEELS POWDER COATED
I'm in Glasgow. I was going to get S&S to do it (I am sure a guy I know got them to do it; albeit with them outsourcing the work) as it needs to go in for new rear shockers and 2 new tyres so I was going to use them as a one shop stop, unless anyone has any better ideas? I only have 1 spare and do not want to leave the car with anyone other than a specialist or S & S.
Last edited by Stephen Pope; 17 April 2006 at 09:07 PM.
#2
Scooby Regular
Join Date: Feb 2006
Location: oot n aboot
Posts: 465
Likes: 0
Received 0 Likes
on
0 Posts
Stephen, give this guy a try!
Wicked Wheels-Bill Blair-07976 402341
He is used by the Subaru dealership(s) in the Central belt and comes highly recommended. He can even do it @ your house as they have a fully kitted out van
It was Ian Grieve in Falkirk that gave me his number and I've to arrange a date to get mine done.
Gus
Wicked Wheels-Bill Blair-07976 402341
He is used by the Subaru dealership(s) in the Central belt and comes highly recommended. He can even do it @ your house as they have a fully kitted out van
It was Ian Grieve in Falkirk that gave me his number and I've to arrange a date to get mine done.
Gus
#5
Scooby Regular
Thread Starter
Join Date: Feb 2004
Location: SOLD - DIESEL MAN NOW...
Posts: 902
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sti-04!!
Would you leave your car in Possil ??
S&S quoted me £50 a wheel!!! I have PFF7's (relica Prodrives) that need powder coating and 2 new tyres so by the time this is all added up, I might be better off picking up a second hand set of genuine second hand Prodrive wheels with tyres.
Cheers for the replies anyway guys.
#6
Scooby Regular
Join Date: Jan 2001
Location: Powered by "SOLARIS"
Posts: 1,694
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Stephen Pope
MMM, was just thinking that!!! I want the wheels to be returned to the car after they have been powder coated!!!
S&S quoted me £50 a wheel!!! I have PFF7's (relica Prodrives) that need powder coating and 2 new tyres so by the time this is all added up, I might be better off picking up a second hand set of genuine second hand Prodrive wheels with tyres.
Cheers for the replies anyway guys.
S&S quoted me £50 a wheel!!! I have PFF7's (relica Prodrives) that need powder coating and 2 new tyres so by the time this is all added up, I might be better off picking up a second hand set of genuine second hand Prodrive wheels with tyres.
Cheers for the replies anyway guys.
---john---
#7
Scooby Regular
Thread Starter
Join Date: Feb 2004
Location: SOLD - DIESEL MAN NOW...
Posts: 902
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by John Stevenson
Trevor at ESP is £35 per wheel, and why would you take your car there ?
---john---
---john---
Trending Topics
#8
Scooby Regular
Thread Starter
Join Date: Feb 2004
Location: SOLD - DIESEL MAN NOW...
Posts: 902
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Gus the Bus
Stephen, give this guy a try!
Wicked Wheels-Bill Blair-07976 402341
He is used by the Subaru dealership(s) in the Central belt and comes highly recommended. He can even do it @ your house as they have a fully kitted out van
It was Ian Grieve in Falkirk that gave me his number and I've to arrange a date to get mine done.
Gus
Wicked Wheels-Bill Blair-07976 402341
He is used by the Subaru dealership(s) in the Central belt and comes highly recommended. He can even do it @ your house as they have a fully kitted out van
It was Ian Grieve in Falkirk that gave me his number and I've to arrange a date to get mine done.
Gus
#9
Scooby Regular
Thread Starter
Join Date: Feb 2004
Location: SOLD - DIESEL MAN NOW...
Posts: 902
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by John Stevenson
Trevor at ESP is £35 per wheel, and why would you take your car there ?
---john---
---john---
#11
Scooby Regular
Thread Starter
Join Date: Feb 2004
Location: SOLD - DIESEL MAN NOW...
Posts: 902
Likes: 0
Received 0 Likes
on
0 Posts
Cheers John, will give them a buzz tomorrow. The cheapest I have so far is PJ powder coating in Spearsbridge Industrial Estate; Thornliebank; Glasgow at £32.50 per wheel. I used them years ago (for some XR2 pepperpots!!! and they were excellent back then.
Have yu used ESP before?
Have yu used ESP before?
#12
Scooby Regular
Join Date: Apr 2004
Location: ayrshire
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
Stephen, give me a phone at the shop or even pop down and i`ll give you a phone number or introduce you ( if you come down )to someone who will do a fantastic job of the wheels for you, he done my last cars and they were better than new.
#13
Scooby Regular
Join Date: May 2002
Location: www.ayrshirescoobies.com
Posts: 2,079
Likes: 0
Received 0 Likes
on
0 Posts
I would use Carrick engineering in Prestwick (a few scoobs I know have used him) to get them done, very good prices and very good finish, got my 19s done for £120 which was the best price I got after trying alot of places, some quoted £50 a wheel!
Cheers
Ricey
Cheers
Ricey
#14
Ive got the number for a guy just outside Mauchline in Ayrshire who does a crackin job and did all the work for RMS, he's done 3 different sets of wheels for me and a few for my mates, every job has been spot on. Think its about 25-30 quid a wheel. Let me no if u want his number m8
#15
Scooby Regular
Thread Starter
Join Date: Feb 2004
Location: SOLD - DIESEL MAN NOW...
Posts: 902
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Rice Rocket
I would use Carrick engineering in Prestwick (a few scoobs I know have used him) to get them done, very good prices and very good finish, got my 19s done for £120 which was the best price I got after trying alot of places, some quoted £50 a wheel!
Cheers
Ricey
Cheers
Ricey
Basically, as noted above, I can get PJ Powder Coating to do an excellent job for £32.90 (or £28.00 cash) and I could walk there if I wanted (not with the wheels right enough!!!)
DanTerzo - 25 - 30 is a good price although the distance and associated petrol probably writes off any saving I would make compared to that noted above.
Edited to say: My father in law works in Ayr and could drop off the wheels - please can you give me the number just in case.
In conclusion if anyone knows of somewhere close to the southside of Glasgow at a reasonable cost (or someone furher away that is MUCH cheaper,) then please let me know.
Only problem now is - anthrocite or gold - a real dilema for me!!!
Cheers for the replies lads!!!
Last edited by Stephen Pope; 20 April 2006 at 09:48 PM.
#18
Scooby Regular
Thread Starter
Join Date: Feb 2004
Location: SOLD - DIESEL MAN NOW...
Posts: 902
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Rice Rocket
Bud, have a look at mine if you want to decide on what colour you want.
Mine are anthracite.
Let me know I'm in the south side of glasgow.
Mine are anthracite.
Let me know I'm in the south side of glasgow.
PM sent!!
#19
Mate, dont go to P and J in the south side, i had a bad experience with them. not good. everybody is different but dont use them. bad bad.
powder coat fell off.
i use a guy that comes to your house and does them the company is called wonder wheels, Alan McNeil is his name. put simply he is the best in the business, painting and polishing, all the dealers use him.
if you want a number PM me.
I am also on the south side of Glasgow.
powder coat fell off.
i use a guy that comes to your house and does them the company is called wonder wheels, Alan McNeil is his name. put simply he is the best in the business, painting and polishing, all the dealers use him.
if you want a number PM me.
I am also on the south side of Glasgow.
#20
Scooby Regular
Thread Starter
Join Date: Feb 2004
Location: SOLD - DIESEL MAN NOW...
Posts: 902
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by davidwilson11
Mate, dont go to P and J in the south side, i had a bad experience with them. not good. everybody is different but dont use them. bad bad.
powder coat fell off.
i use a guy that comes to your house and does them the company is called wonder wheels, Alan McNeil is his name. put simply he is the best in the business, painting and polishing, all the dealers use him.
if you want a number PM me.
I am also on the south side of Glasgow.
powder coat fell off.
i use a guy that comes to your house and does them the company is called wonder wheels, Alan McNeil is his name. put simply he is the best in the business, painting and polishing, all the dealers use him.
if you want a number PM me.
I am also on the south side of Glasgow.
I ended up using P&J - very satisfied with the result (albeit a darker shade of gold.) I had used them years ago and was happy then. I kerbed one of my alloys back then and that caused the laquer to be damaged, the water got in etc etc. My fault and not P&J's IMHO.
#21
Scooby Regular
Join Date: Aug 2005
Location: 392/361 MY04 STi
Posts: 7,638
Likes: 0
Received 0 Likes
on
0 Posts
Maybe a stupid question (but never coated any wheels before), but does Powder coating only give a dull finish? I've seen pics previous sets powder coated and they were dull. I was after a bright finish.
#22
Scooby Regular
Thread Starter
Join Date: Feb 2004
Location: SOLD - DIESEL MAN NOW...
Posts: 902
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GazTheHat
Maybe a stupid question (but never coated any wheels before), but does Powder coating only give a dull finish? I've seen pics previous sets powder coated and they were dull. I was after a bright finish.
In the light:
Darker: (And after a good thrashing which made the wheels darker with brake dust)
Darker:
Where has the sun gone:
#25
Scooby Regular
Join Date: Feb 2006
Location: High Wycombe
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
How about down south?
I went to a pristine wheels agent in Wycombe, but didn't have MY02 WRX 17" wheels in exchange stock. I was hoping they did because to hand in the current wheels to be refurbished and powder coated in anthracite will take around 5-10 days at 70 quid a corner. too long for too much.
I went to a pristine wheels agent in Wycombe, but didn't have MY02 WRX 17" wheels in exchange stock. I was hoping they did because to hand in the current wheels to be refurbished and powder coated in anthracite will take around 5-10 days at 70 quid a corner. too long for too much.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM