Birchy's 2Door Hawkeye by MBDevelopments
25 May 2016, 09:29 AM
#64
Sponsor
iTrader: (250)
Join Date: Jul 2008
Location: 2minutes from J10 M6 Walsall West Midlands
Posts: 11,933
Likes: 0
Received 21 Likes
on
9 Posts
ohhh james I cannot believe you believed me lol battery hasn't been forgot just not ordered it yet till needed the varley red top battery will sit on passenger chassis leg we already tested mine you silly sausage
ciaran we ran these idler type wheels on all our builds and never have a issue infact they work very well and smaller sizes means more room in a already compact area the larger ones wouldn't hurt but simply wouldn't fit in places we have them
gazney manifold is a copy of the magnus one we had to re do all the welds as before even fitting seen cracks and its not the best stuff to weld ether also converted it to dbw opposed to cable with this done its been perfect and tested to a nice 754bhp on rcm dyno on a previous car we built so were more than happy with it specially considering the price as for fitment yes fits spot on we do use the cosworth full Teflon tumbler bodies thou which massively helps with temps also these aren't so cheap
ciaran we ran these idler type wheels on all our builds and never have a issue infact they work very well and smaller sizes means more room in a already compact area the larger ones wouldn't hurt but simply wouldn't fit in places we have them
gazney manifold is a copy of the magnus one we had to re do all the welds as before even fitting seen cracks and its not the best stuff to weld ether also converted it to dbw opposed to cable with this done its been perfect and tested to a nice 754bhp on rcm dyno on a previous car we built so were more than happy with it specially considering the price as for fitment yes fits spot on we do use the cosworth full Teflon tumbler bodies thou which massively helps with temps also these aren't so cheap
27 May 2016, 09:32 PM
#68
Scooby Regular
iTrader: (16)
Join Date: Apr 2003
Location: Curlew FPSO
Posts: 2,771
Likes: 0
Received 0 Likes
on
0 Posts
ohhh james I cannot believe you believed me lol battery hasn't been forgot just not ordered it yet till needed the varley red top battery will sit on passenger chassis leg we already tested mine you silly sausage
ciaran we ran these idler type wheels on all our builds and never have a issue infact they work very well and smaller sizes means more room in a already compact area the larger ones wouldn't hurt but simply wouldn't fit in places we have them
gazney manifold is a copy of the magnus one we had to re do all the welds as before even fitting seen cracks and its not the best stuff to weld ether also converted it to dbw opposed to cable with this done its been perfect and tested to a nice 754bhp on rcm dyno on a previous car we built so were more than happy with it specially considering the price as for fitment yes fits spot on we do use the cosworth full Teflon tumbler bodies thou which massively helps with temps also these aren't so cheap
ciaran we ran these idler type wheels on all our builds and never have a issue infact they work very well and smaller sizes means more room in a already compact area the larger ones wouldn't hurt but simply wouldn't fit in places we have them
gazney manifold is a copy of the magnus one we had to re do all the welds as before even fitting seen cracks and its not the best stuff to weld ether also converted it to dbw opposed to cable with this done its been perfect and tested to a nice 754bhp on rcm dyno on a previous car we built so were more than happy with it specially considering the price as for fitment yes fits spot on we do use the cosworth full Teflon tumbler bodies thou which massively helps with temps also these aren't so cheap
Mine just ate belts but may have been the routing I took.
Was grand once I fitted a new bigger pully.
Build is looking awesome
Also glad you hadn't forgotten a battery
04 June 2016, 10:38 PM
#70
600 minimum should be on the card. 700 on meth or race fuel should we go that way.
So am I Banny. Be glad to get it out. Fingers crossed hoping to get to a sprint round before the end of the season too.
Almost time to try to map it again. Few little niggles holding us up such as this
But fingers crossed should be on the trailer and down to see Martin for a map this week with a quick stop to A Line to make sure the car goes in a straight line.
Hoping for another update soon!
So am I Banny. Be glad to get it out. Fingers crossed hoping to get to a sprint round before the end of the season too.
Almost time to try to map it again. Few little niggles holding us up such as this
But fingers crossed should be on the trailer and down to see Martin for a map this week with a quick stop to A Line to make sure the car goes in a straight line.
Hoping for another update soon!
18 July 2016, 08:58 AM
#82
First trip out yesterday with Matty and the boys from MB Developments, made it to the MSOC day in the morning, Race wars for an hour in the afternoon and then onto MSL for an hour too while clocking some miles on actuator boost to get some seat time.
Pictures courtesy of Auto Exposure Photography.
Pictures courtesy of Auto Exposure Photography.
