*** RB!, subaru wagon, driveway build ***
26 April 2015, 10:14 AM
#31
Scooby Regular
Thread Starter
Join Date: Jul 2014
Location: kent
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
cheers for the comments
so little update as had a couple hours playing
subframe and gearbox mounts are now made and fitted, pretty happy they line up bang on will take pics after everything has been fabricated
juuuuust enough clearence
steering column back in for the modified uj setup i made so i could run the nissan rack
pas resevoir mounted
so little update as had a couple hours playing
subframe and gearbox mounts are now made and fitted, pretty happy they line up bang on will take pics after everything has been fabricated
juuuuust enough clearence
steering column back in for the modified uj setup i made so i could run the nissan rack
pas resevoir mounted
09 June 2015, 01:50 PM
#35
Scooby Regular
Thread Starter
Join Date: Jul 2014
Location: kent
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
cheers guys few updates
little up date stripped cleaned and fitted sum acl bearings to the sr
finished the frame for the intercooler and radiaitor
finished the chrome gold engine bay
little up date stripped cleaned and fitted sum acl bearings to the sr
finished the frame for the intercooler and radiaitor
finished the chrome gold engine bay
14 July 2015, 01:20 PM
#43
Scooby Regular
Thread Starter
Join Date: Jul 2014
Location: kent
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
cheers mate 
quick update propshaft arrived back from jwengineering, great company would highly recommend them great all round service
external waste gate all finished with screemer pipe heat wrapped and tickling the floor, also finished the airfilter inlet
battery mounted too
front arches finished
side exit exhaust fineshed 3 inch straight through flattend the system for ground clearance will poke just out the side skirt then be trimmed to suit
quick update propshaft arrived back from jwengineering, great company would highly recommend them great all round service
external waste gate all finished with screemer pipe heat wrapped and tickling the floor, also finished the airfilter inlet
battery mounted too
front arches finished
side exit exhaust fineshed 3 inch straight through flattend the system for ground clearance will poke just out the side skirt then be trimmed to suit
03 August 2015, 01:07 PM
#54
Scooby Regular
Thread Starter
Join Date: Jul 2014
Location: kent
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
just got back from Latvia watching round 3 of drift all stars ,,, amazing!!!
cheers for the comments people its allways good to here them, makes up loading the pics etc all worth it
headlights have been wrapped in film you can buy it online pretty cheap altho I need to re do mine as got a few wrinkles I in
im also after the following parts if any one can help
std passenger front wiper arm
after market adjustable drivers seat frame
fixed bucket seat
cheers for the comments people its allways good to here them, makes up loading the pics etc all worth it
headlights have been wrapped in film you can buy it online pretty cheap altho I need to re do mine as got a few wrinkles I in
im also after the following parts if any one can help
std passenger front wiper arm
after market adjustable drivers seat frame
fixed bucket seat
Thread
Thread Starter
Forum
Replies
Last Post
Jonny mac
ScoobyNet General
10
09 October 2015 12:25 PM
Sub-Subaru
General Technical
1
28 September 2015 12:47 PM