2011 WRX STi Subaru saloon front Lip / splitter
1 Attachment(s)
Hi,
Here is our latest product , developed by HT Autos UK. As people who have the new STi saloon know, Subaru UK have yet again neglected to give us the styling mods most other countries around the globe have, including a front lip splitter. So we have decided to make our own version, made from Polyurethane black plastic. This is our prototype........ What do you think??? Attachment 67315 Mark @ HTAutos:thumb: |
A picture of it on the car might help :)
|
Originally Posted by g7prs
(Post 10032909)
A picture of it on the car might help :)
|
How close is the front of the saloon to the hatch version, i.e. will this fit the hatch too?
Just to widen the market for you ;) |
Just thinking that could look good on my hatch, been looking for a new one!
|
1 Attachment(s)
Originally Posted by g7prs
(Post 10032909)
A picture of it on the car might help :)
This is the mock up on a bumper..... Attachment 67316
Originally Posted by vulnax999
(Post 10032950)
How close is the front of the saloon to the hatch version, i.e. will this fit the hatch too?
Just to widen the market for you ;) |
Hatch and saloon front end are identical, I will confirm it if I can get a lip of you tomorrow?
|
I think the front bumpers on the pre 11 cars (hatch) are not the same as the post 11 cars (saloon & hatch).
Paul. |
Yes, I'd be interested if this fitted MY08 cars, current spoiler is a little subtle.
|
Any plans for a wrx /wrxd hatch 08/10 front lip spoiler as it's different to the Sti front end
|
Originally Posted by HT_Autos
(Post 10032888)
Hi,
As people who have the new STi saloon know, Subaru UK have yet again neglected to give us the styling mods most other countries around the globe have, including a front lip splitter. Mark @ HTAutos:thumb: A little unfair. They could bring in the STi items but due to exchange rate noboby would buy them. However for those that can afford this is my STi one........... http://homepage.ntlworld.com/donald.clark/PICT0014.JPG This is the Chargespeed version from their BottomLine set..... http://www.chargespeed.com/photo/bot...fs-600-350.jpg http://www.chargespeed.com/photo/bottom/gvb/f-298.jpg http://www.chargespeed.com/photo/bot...-600-400-1.jpg Yours looks very similar to this but with the front edge following the bumper line instead of rounding it off. Would have to see fitted to really comment but looking good and probably far cheaper than importing from Japan. :thumb: |
that looks nice, much more noticable then the STI one
what materials will you be producing it in Carbon, GRP, fibre glass? the hatch bumper (and saloon) facelift and pre face lift both have the same sti lip part number so i would assume apart from the grill and vent mould differences the bottom is all the same |
how about one shaped like that for the bug eye
|
Originally Posted by lordharding
(Post 10033339)
Any plans for a wrx /wrxd hatch 08/10 front lip spoiler as it's different to the Sti front end
|
Originally Posted by paulbu
(Post 10033831)
The 08 Sti hatch spoiler was a perfect fit as standard to the WRX-S, which has the same front lip as the WRX, so by my reckoning, if the front end of the Sti saloon is the same as the Sti hatch, then this new part should fit the WRX hatch.
|
But as Mark says above the STI lip has the same part number for both MY08 and MY11 so if the OE lip fits both models there is no reason this will not.
|
Originally Posted by juggers
(Post 10033287)
Hatch and saloon front end are identical, I will confirm it if I can get a lip of you tomorrow?
We now have them in stock, slightly more expensive than the hawk ones.
Originally Posted by rb5 286
(Post 10033507)
that looks nice, much more noticable then the STI one
what materials will you be producing it in Carbon, GRP, fibre glass? the hatch bumper (and saloon) facelift and pre face lift both have the same sti lip part number so i would assume apart from the grill and vent mould differences the bottom is all the same Not sure if they fit the 08-10 hatches, but do fit the 2011 Hatches. |
Originally Posted by Arronb
(Post 10034066)
But as Mark says above the STI lip has the same part number for both MY08 and MY11 so if the OE lip fits both models there is no reason this will not.
However having looked at the revised STi catalogue and Sports part pages they now show a part number for the 2011 as SG517FG010 which suggests they are still different but changed to a mainstream part. http://www.subaru.jp/accessory/wrx/impreza_wrx_acc.pdf |
The ht auto lips looks miles better as it captures the original lines. The new M11 face lift looks much better than the MY08 IMHO.
|
I just looked at the installation guides on STIS (subaru tech system) and it lists the STI front underspoiler as
E2410FG100 from 2008 onwards http://techinfo.subaru.com/proxy/633...e2410fg100.pdf |
Originally Posted by rb5 286
(Post 10035626)
I just looked at the installation guides on STIS (subaru tech system) and it lists the STI front underspoiler as
E2410FG100 from 2008 onwards http://techinfo.subaru.com/proxy/633...e2410fg100.pdf That spoiler is listed for the '08 WRX Base, '08-'10 2.5i & 2.5GT Whereas E2410FG120 is listed for the '08-'10 STI If you want the STi spoiler for an 08-10 STi Hatch you can always go to your dealer, its listed on page 5 of the brochure below, and works out about the same price as buying from the States, once you include P&P and VAT etc. http://imwww.imgroup.co.uk/imggb/www/subaru_accessories.nsf/NULL/355D2E7E3C45F33A802573DA0060E1D3/$FILE/SIB081%20Impreza%20STI%202008.pdf |
cheers, i already got the lip and the lower lip fitted to mine ;)
|
1 Attachment(s)
This is our front lip fitted to 2011 STi WRX on KT Green-Subaru Demo car:) We were told by Simon Green, that his technician commented that it fits better than the original Subaru one:luxhello:
Attachment 67317 Mark @ HTAutos:thumb: |
thats really smart, i like that a lot :-)
|
Looks lovely have you got a front on pic?
|
That looks absolutely superb
|
does look good.... i want a 2011 car now :(
but won't swap my 330s to 320r :lol: |
Originally Posted by salsa-king
(Post 10063560)
does look good.... i want a 2011 car now :(
but won't swap my 330s to 320r :lol: http://www.subaruforester.org/vbulle...nge-image1.jpg |
4 Attachment(s)
|
looks great
interested to see a white one with it fitted :D |
All times are GMT +1. The time now is 01:10 AM. |
© 2024 MH Sub I, LLC dba Internet Brands