UK Turbo 2000, tuning to 300bhp?
What routes are available to take a UK Turbo 2000 [MY00 Classic] to about 300 bhp?
What costs are involved? Can the brakes take it? Will the standard clutch **** itself? I've tried the search function but most people seem to be starting from an STi rather a standard uk model! Cheers in advance! :thumb: |
I'm in the same situation, I've had my99 uk classic for about 10 months. I want to get some more power!
Good Question mate! |
I have had my MY99 remapped on V-Power by Bob Rawle. He squeezed 281bhp and 312 lb/ft out of it. The only other mods are a KN panel filter and a Magnex middle de cat and back box. Anymore without spending on a new turbo would be impossible. The Ecutek remap is a very cost effective way of gaining decent power/torque increases on these cars. Make sure you choose a good mapper and he will look after you. I am also running on the original standard clutch...at the moment!
|
For that sort of power your going to need a tdo4 hybrid guys:)
I have one for sale:norty: Then you will need... 255 fuel pump De cat down pipe And a remap (your car already has 440 injectors) I think you could do it all for £1000 For abit more power and faster spool add... Ported headers Ported up pipe De cat center pipe Back box |
Standard stuff like
exhaust fuel pump remap will get u round 280 mark, thats bout limit of standard turbo i think. |
Interesting, thanks guys!
Is there a Bosch alternative to the 255? Going 4 400bhp - How much for the turbo mate? ;) |
mine is running 277.5 but think its a bit nearer 300 now with boost holding
have autobahn fmic vf 34 turbo air filter de cat and exhaust equal headers standard 0.7 boost. |
look at ( www. scoobyireland.com ) projects + mods ,, see jamie,s car ,uk model , think its about 400 bhp ,
|
I'm running 280bhp with...
K&N IK FMIC Full Hayward & Scott exhaust system with no cats. ECUTEK remap But as said the turbo runs out of puff. Looking to get a new turbo and 255 fuel pump and then get it mapped again for over 300bhp soon. |
see "my Scooby" for specs of my old MY99 UK.
Got it to 309BHP but on reflection I wouldn't have changed the turbo intake hose. Easy way is: VF28 £150 or any other turbo from an STI (so long as it is front entry) e.g. VF24/28/29/34/35 Decat Remap Fuel Pump 3 port boost solenoid Should be able to do that lot for £1000 without the exhaust That should see you to 300bhp Brakes will be fine but maybe upgrade the pads to some Ferodo DS2500, clutch should be okay at that power level if there is life in it. Damo |
Originally Posted by Rossyboy99
(Post 8030750)
mine is running 277.5 but think its a bit nearer 300 now with boost holding
have autobahn fmic vf 34 turbo air filter de cat and exhaust equal headers standard 0.7 boost. Damo |
Have a look at the link below mate and have a look in the Diary he built a 300BHP Uk car and did an awesome write up
Carl Davey, specialist Subaru Impreza parts supply |
Last year I had the following fitted to MY99 RB5?
-aeromotive fuel pressure regulator -greddy boost controller -walbro 255 fuel pump -h+s openmouth downpipe and full blitz nur-spec r exhaust syatem -autohan 88 Front Mount Intercoler -Haltech ECU Made 305bhp/301lbft last February on the rolling road, still running the standard TD04 turbo, and the car went like stink with piles of torque:norty: ....running a little more now with some new mods:lol1: |
See my profile
If you just want 300bhp, substitute VF35 with TD04 hybrid. And if you don't intend to track the car, stick with the std intercooler and then you also don't need the induction kit. Ns04 |
All times are GMT +1. The time now is 05:32 AM. |
© 2024 MH Sub I, LLC dba Internet Brands