Version 1/2 Impreza's, stand up and show yourselves!!
#1
Scooby Regular
Thread Starter
Join Date: Jun 2013
Location: N/A
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
Version 1/2 Impreza's, stand up and show yourselves!!
Any V1/2 owners please post pics here along with mileage, specs, etc.
It would be nice to see how many are still around and driveable to say the least!
Regards,
Subaru Collector 555.
It would be nice to see how many are still around and driveable to say the least!
Regards,
Subaru Collector 555.
#2
Scooby Regular
iTrader: (2)
My old girl, love her to bits.
Around 115k mix of miles and kms. Weekend warrior/track day slag.
MY96 Subaru Impreza Sti Type-Ra V2
Interior:
STI 6 speed Duracon gear ****.
Lamco Boost, Volt and Temp gauges.
Prosport Stepper motor peak/warn pillar mounted boost and oil pressure gauges.
A/C Delete.
Momo steering wheel.
Subaru radio blank plate.
Electric front and rear windows.
Engine:
Long engine built by finch motorsport.
Rebuild based on inspected EJ20 open deck block with report.
All bearing surfaces tolerances measured/checked (recorded in report)
Replacement center thrust crank (measured and inspected)
ACL Race main and big end bearings.
"new age" STI con rods.
Mahle 4032 Forged pistons 92.5 O/S
ARP 11mm head studs.
Gen Subaru MLS head gaskets.
Finch Motorsport modified oil pump.
OE water pump.
AS performance clubman baffled sump.
OBP baffled catch tank.
Cylinder Heads and valve train:
22b cylinder heads, valves reseated refaced to finch motorsport spec.
Valve guides and seals replaced.
Valve clearances set.
OE Subaru timing belt tensioner & Idlers.
Gates "Racing" kevlar timing belt.
RCM timing belt guide.
Management & Electrical:
ESL Daughter board.
Mapped by Race dynamix.
97 STI MAP sensor.
MAF Delete.
"New age" coil pack conversion.
Induction, fueling & Cooling:
TDO5 16G turbo charger.
440cc Yellow injectors
Sard fuel pressure regulator & Gauge.
Walbro 255 lph fuel pump.
RCM K&N cone air filter.
HDI Hybrid front mount intercooler.
Upgraded Viper performance Intercooler hoses, clamps and vacuum pipes.
Forge Header tank.
Forge VTA BOV
Samco coolant hose set.
Transmission:
6 speed DCCD TY856WN4KA
gear ratios 3.636:1, 2.375:1, 1.761:1, 1.346:1, 0.971:1, 0.756:1
Final drive 3.90:1 Sure track LSD 180 drive shafts and hubs.
Excedy pink box clutch.
"DCCD Pro" diff control with auto option
Braking, Tyres and Suspension:
Four piston calipers front.
Carbon Lorraine CL5+ brake pads
High carbon grooved discs.
Goodgridge braided hoses.
Cusco Brake stopper.
Twin Piston caliper rear vented discs (Type R 190 hand brake)
Goodridge hoses.
Toyo Proxes R1R 205/50/16 Speedline 16" rims.
Bilstein coilovers front and rear.
Swift springs
Cusco adjustable top mounts front and rear.
STI carbon strut brace.
STI quick steering rack.
Body:
Standard STI Type RA spec with roof vent.
Modifications: Subaru STI skirts. Front bumper modified to accept Front mount intercooler.
Around 115k mix of miles and kms. Weekend warrior/track day slag.
MY96 Subaru Impreza Sti Type-Ra V2
Interior:
STI 6 speed Duracon gear ****.
Lamco Boost, Volt and Temp gauges.
Prosport Stepper motor peak/warn pillar mounted boost and oil pressure gauges.
A/C Delete.
Momo steering wheel.
Subaru radio blank plate.
Electric front and rear windows.
Engine:
Long engine built by finch motorsport.
Rebuild based on inspected EJ20 open deck block with report.
All bearing surfaces tolerances measured/checked (recorded in report)
Replacement center thrust crank (measured and inspected)
ACL Race main and big end bearings.
"new age" STI con rods.
Mahle 4032 Forged pistons 92.5 O/S
ARP 11mm head studs.
Gen Subaru MLS head gaskets.
Finch Motorsport modified oil pump.
OE water pump.
AS performance clubman baffled sump.
OBP baffled catch tank.
Cylinder Heads and valve train:
22b cylinder heads, valves reseated refaced to finch motorsport spec.
Valve guides and seals replaced.
Valve clearances set.
OE Subaru timing belt tensioner & Idlers.
Gates "Racing" kevlar timing belt.
RCM timing belt guide.
Management & Electrical:
ESL Daughter board.
Mapped by Race dynamix.
97 STI MAP sensor.
MAF Delete.
"New age" coil pack conversion.
Induction, fueling & Cooling:
TDO5 16G turbo charger.
440cc Yellow injectors
Sard fuel pressure regulator & Gauge.
Walbro 255 lph fuel pump.
RCM K&N cone air filter.
HDI Hybrid front mount intercooler.
Upgraded Viper performance Intercooler hoses, clamps and vacuum pipes.
Forge Header tank.
Forge VTA BOV
Samco coolant hose set.
Transmission:
6 speed DCCD TY856WN4KA
gear ratios 3.636:1, 2.375:1, 1.761:1, 1.346:1, 0.971:1, 0.756:1
Final drive 3.90:1 Sure track LSD 180 drive shafts and hubs.
Excedy pink box clutch.
"DCCD Pro" diff control with auto option
Braking, Tyres and Suspension:
Four piston calipers front.
Carbon Lorraine CL5+ brake pads
High carbon grooved discs.
Goodgridge braided hoses.
Cusco Brake stopper.
Twin Piston caliper rear vented discs (Type R 190 hand brake)
Goodridge hoses.
Toyo Proxes R1R 205/50/16 Speedline 16" rims.
Bilstein coilovers front and rear.
Swift springs
Cusco adjustable top mounts front and rear.
STI carbon strut brace.
STI quick steering rack.
Body:
Standard STI Type RA spec with roof vent.
Modifications: Subaru STI skirts. Front bumper modified to accept Front mount intercooler.
#3
Scooby Regular
Thread Starter
Join Date: Jun 2013
Location: N/A
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
My old girl, love her to bits.
Around 115k mix of miles and kms. Weekend warrior/track day slag.
MY96 Subaru Impreza Sti Type-Ra V2
Interior:
STI 6 speed Duracon gear ****.
Lamco Boost, Volt and Temp gauges.
Prosport Stepper motor peak/warn pillar mounted boost and oil pressure gauges.
A/C Delete.
Momo steering wheel.
Subaru radio blank plate.
Electric front and rear windows.
Engine:
Long engine built by finch motorsport.
Rebuild based on inspected EJ20 open deck block with report.
All bearing surfaces tolerances measured/checked (recorded in report)
Replacement center thrust crank (measured and inspected)
ACL Race main and big end bearings.
"new age" STI con rods.
Mahle 4032 Forged pistons 92.5 O/S
ARP 11mm head studs.
Gen Subaru MLS head gaskets.
Finch Motorsport modified oil pump.
OE water pump.
AS performance clubman baffled sump.
OBP baffled catch tank.
Cylinder Heads and valve train:
22b cylinder heads, valves reseated refaced to finch motorsport spec.
Valve guides and seals replaced.
Valve clearances set.
OE Subaru timing belt tensioner & Idlers.
Gates "Racing" kevlar timing belt.
RCM timing belt guide.
Management & Electrical:
ESL Daughter board.
Mapped by Race dynamix.
97 STI MAP sensor.
MAF Delete.
"New age" coil pack conversion.
Induction, fueling & Cooling:
TDO5 16G turbo charger.
440cc Yellow injectors
Sard fuel pressure regulator & Gauge.
Walbro 255 lph fuel pump.
RCM K&N cone air filter.
HDI Hybrid front mount intercooler.
Upgraded Viper performance Intercooler hoses, clamps and vacuum pipes.
Forge Header tank.
Forge VTA BOV
Samco coolant hose set.
Transmission:
6 speed DCCD TY856WN4KA
gear ratios 3.636:1, 2.375:1, 1.761:1, 1.346:1, 0.971:1, 0.756:1
Final drive 3.90:1 Sure track LSD 180 drive shafts and hubs.
Excedy pink box clutch.
"DCCD Pro" diff control with auto option
Braking, Tyres and Suspension:
Four piston calipers front.
Carbon Lorraine CL5+ brake pads
High carbon grooved discs.
Goodgridge braided hoses.
Cusco Brake stopper.
Twin Piston caliper rear vented discs (Type R 190 hand brake)
Goodridge hoses.
Toyo Proxes R1R 205/50/16 Speedline 16" rims.
Bilstein coilovers front and rear.
Swift springs
Cusco adjustable top mounts front and rear.
STI carbon strut brace.
STI quick steering rack.
Body:
Standard STI Type RA spec with roof vent.
Modifications: Subaru STI skirts. Front bumper modified to accept Front mount intercooler.
Around 115k mix of miles and kms. Weekend warrior/track day slag.
MY96 Subaru Impreza Sti Type-Ra V2
Interior:
STI 6 speed Duracon gear ****.
Lamco Boost, Volt and Temp gauges.
Prosport Stepper motor peak/warn pillar mounted boost and oil pressure gauges.
A/C Delete.
Momo steering wheel.
Subaru radio blank plate.
Electric front and rear windows.
Engine:
Long engine built by finch motorsport.
Rebuild based on inspected EJ20 open deck block with report.
All bearing surfaces tolerances measured/checked (recorded in report)
Replacement center thrust crank (measured and inspected)
ACL Race main and big end bearings.
"new age" STI con rods.
Mahle 4032 Forged pistons 92.5 O/S
ARP 11mm head studs.
Gen Subaru MLS head gaskets.
Finch Motorsport modified oil pump.
OE water pump.
AS performance clubman baffled sump.
OBP baffled catch tank.
Cylinder Heads and valve train:
22b cylinder heads, valves reseated refaced to finch motorsport spec.
Valve guides and seals replaced.
Valve clearances set.
OE Subaru timing belt tensioner & Idlers.
Gates "Racing" kevlar timing belt.
RCM timing belt guide.
Management & Electrical:
ESL Daughter board.
Mapped by Race dynamix.
97 STI MAP sensor.
MAF Delete.
"New age" coil pack conversion.
Induction, fueling & Cooling:
TDO5 16G turbo charger.
440cc Yellow injectors
Sard fuel pressure regulator & Gauge.
Walbro 255 lph fuel pump.
RCM K&N cone air filter.
HDI Hybrid front mount intercooler.
Upgraded Viper performance Intercooler hoses, clamps and vacuum pipes.
Forge Header tank.
Forge VTA BOV
Samco coolant hose set.
Transmission:
6 speed DCCD TY856WN4KA
gear ratios 3.636:1, 2.375:1, 1.761:1, 1.346:1, 0.971:1, 0.756:1
Final drive 3.90:1 Sure track LSD 180 drive shafts and hubs.
Excedy pink box clutch.
"DCCD Pro" diff control with auto option
Braking, Tyres and Suspension:
Four piston calipers front.
Carbon Lorraine CL5+ brake pads
High carbon grooved discs.
Goodgridge braided hoses.
Cusco Brake stopper.
Twin Piston caliper rear vented discs (Type R 190 hand brake)
Goodridge hoses.
Toyo Proxes R1R 205/50/16 Speedline 16" rims.
Bilstein coilovers front and rear.
Swift springs
Cusco adjustable top mounts front and rear.
STI carbon strut brace.
STI quick steering rack.
Body:
Standard STI Type RA spec with roof vent.
Modifications: Subaru STI skirts. Front bumper modified to accept Front mount intercooler.
What sort of power is it running with that spec?
Regards,
Subaru Collector 555.
Trending Topics
#20
Scooby Regular
iTrader: (2)
Join Date: Oct 2002
Location: oop north in a spec-c.Now sold and starting on a classic ra track/sprint/road car
Posts: 2,536
Likes: 0
Received 7 Likes
on
7 Posts
Prefacelift shell fully seam welded full SD T45 weld in cage custom lightweight main loom/engine loom(JSMotorsport) tank in boot flat floor,TSS tubular subframes fully adjustable rose jointed links/whiteline anti lift kit and ARB's,floor mounted peddle box,Hotbits 3 way remote suspension,spec-c engine 6 speed box,syvecs 6GP ecu,ID 1000 injectors, SC42/46 twinscroll (rotated/clocked with custom side exit exhaust all fab work carried out by MB developments)Dash 2 digital dash all plumbed in fire line extiquisher system,thats just a brief spec, car is getting final mapping by Andy F begining of may after I had problems with the AVCS solenoids at the first mapping session sticking so not letting the cams advance that has been resolved now so hopefully thats everything sorted.
#22
#30
Where Did You Get That Scoop To Fit The Hood Vent..? Somethin' I Would Get Hahaha