horn upgrade
#6
Scooby Regular
Join Date: May 2006
Location: N Ireland
Posts: 1,631
Likes: 0
Received 0 Likes
on
0 Posts
I got some from this place. Over this side of the water but a genuine Hella supplier
http://www.ebay.co.uk/itm/GENUINE-HE...e=STRK:MESE:IT
http://www.ebay.co.uk/itm/GENUINE-HE...e=STRK:MESE:IT
Trending Topics
#10
Scooby Regular
I've got PIAAs and they were easy to fit.
I used the original center mount for the right horn and there was a matching hole on the other side of the center strut that I used for the left horn. You can feed both horns from the original right horn feed, but if you're going to remove the second horn from the offside front then you can pick up a feed from here and run a wire to the second horn.
Tip... You can get to this horn through the side vent in the bumper if you aren't removing the bumper, but you'll need to remove the grill to get to the centre horn, which is held in place by 6 screws 4 of which are a challenge to get to with the bumper on, but it is possible!
I originally left the bling PIAA stickers on the horns, but after a year I didn't like the look so removed the stickers so they are now just black and blend into the grill and radiator.
I used the original center mount for the right horn and there was a matching hole on the other side of the center strut that I used for the left horn. You can feed both horns from the original right horn feed, but if you're going to remove the second horn from the offside front then you can pick up a feed from here and run a wire to the second horn.
Tip... You can get to this horn through the side vent in the bumper if you aren't removing the bumper, but you'll need to remove the grill to get to the centre horn, which is held in place by 6 screws 4 of which are a challenge to get to with the bumper on, but it is possible!
I originally left the bling PIAA stickers on the horns, but after a year I didn't like the look so removed the stickers so they are now just black and blend into the grill and radiator.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM