Caged Type R Classic Breaking
08 August 2013, 09:50 PM
#1
Scooby Regular
Thread Starter
iTrader: (10)
Join Date: Jun 2001
Location: Kent
Posts: 1,238
Likes: 0
Received 0 Likes
on
0 Posts
Caged Type R Classic Breaking
Due to my new toy arriving shortly, and the lack of time to use it, I have decided to break my car. Would consider offers on the whole car, but I am quite happy to break.
Brief Spec:
V3 Type R V Limited Shell
FIA Approved custom cages weld in Group N cage
Arches Cut and welded with ABW wide arches fitted and painted
Alloy Bonnet.
STI Quick rack
STI V6 Rear Spoiler
2.5 Forged Engine
Made 500.4bhp at the wheels on SVA Imports Dyno
Pinned 2.5 Block
14mm Headstuds (RCM)
OEM 2.5 crank
Pauter Rods
Cosworth Pistons
RCM 12 oil pump
New Modine
RCM water pump
Engine has done less than 2000 miles
2.5 AVCS heads (D25)
Supertech Nitrided Stainless Inlet Valves
Supertech Inconel Exhaust Valves
Supertech Double Valve Springs
Supertech Titanium Lifters
RCM spring seats
CDF racing Vernier exhaust pulleys
Cosworth sump Baffle plate.
Tumble delete housings
Newage manifold with throttle body
Syvecs S6 with Sensors
Garrett GT35R Turbo
Latest design RCM twisted kit,
GT Spec Tubular headers
Tial 44m External waste gate
Turbosmart 4 port boost controller.
Headers, up pipe and down pipe are all freshly wrapped with DEI Titanium wrap
AP Racing 6 Pot front brake kit
Rear Brembos
3" Miltek Centre and Rear.
BC RM Series Coilovers
Complete UK Six speed setup with rear diff shafts R180 hubs and Brembo brakes
Exedy Twin Plate Clutch
Complete Fuel Setup
This is a complete setup from the boot to the engine
RCM 340 intank pump with -6 tank cap modification
SM engineering swirl pop -6 inlets - 8 pump feed
All braided hoses with -6 fittings
Bosch 044 inline pump
Billet fuel rails with -6 fittings
Fuel lab fuel filter
Injector Dynamics 1000cc injectors
RCM fuel pressure regulator
STI Rear lights
OMP Champ Bucket Seats and harnesses with Buddyclub low rails
Carbon Door Cards x 4
RS500 Intercooler
XXR530 8.75x18" with R888's
RCM Track Attack Catch Can
2 x 12" Pacet Rad Fans
Prices below:
Type R Shell, Custom Caged, ABW Arches complete with exterior Panels £Provisionally Sold
6 Speed Gearbox Conversion Complete £1,500
XXR 530 Chrome Black 8.75" x 18ET20 R888's 4mm + Tread a + 1 Spare 2mm £950
2.5 Forged Engine, 14 mm Headstuds, Cosworth Pistons, Pauter Rods, Cosworth Sump etc £SOLD
Exedy Twinplate Clutch £600
Garrett GT35R Turbo £SOLD
RCM Twisted Kit £SOLD
AP Racing Front Brakes £SOLD
Airtec RS500 Intercooler £SOLD
OMP Champ Seats, Buddyclub Low rails, Sparco 3" Harnesses £600
Syvecs S6 with Sensors £SOLD
Miltek Centre and Rear Exhaust from Newage 3" £300
ID 1000 Injectors £SOLD
BC Coilovers £SOLD
Fuel System - FPR, RCM 340 In Tank, Bosch 044 External, Swirlpot, Billet Rails, Pipework £600
Carbon Door Cards £SOLD
RCM Track Attack £SOLD
2 x 12" Pacet Rad Fans £180
Contact via PM
Brief Spec:
V3 Type R V Limited Shell
FIA Approved custom cages weld in Group N cage
Arches Cut and welded with ABW wide arches fitted and painted
Alloy Bonnet.
STI Quick rack
STI V6 Rear Spoiler
2.5 Forged Engine
Made 500.4bhp at the wheels on SVA Imports Dyno
Pinned 2.5 Block
14mm Headstuds (RCM)
OEM 2.5 crank
Pauter Rods
Cosworth Pistons
RCM 12 oil pump
New Modine
RCM water pump
Engine has done less than 2000 miles
2.5 AVCS heads (D25)
Supertech Nitrided Stainless Inlet Valves
Supertech Inconel Exhaust Valves
Supertech Double Valve Springs
Supertech Titanium Lifters
RCM spring seats
CDF racing Vernier exhaust pulleys
Cosworth sump Baffle plate.
Tumble delete housings
Newage manifold with throttle body
Syvecs S6 with Sensors
Garrett GT35R Turbo
Latest design RCM twisted kit,
GT Spec Tubular headers
Tial 44m External waste gate
Turbosmart 4 port boost controller.
Headers, up pipe and down pipe are all freshly wrapped with DEI Titanium wrap
AP Racing 6 Pot front brake kit
Rear Brembos
3" Miltek Centre and Rear.
BC RM Series Coilovers
Complete UK Six speed setup with rear diff shafts R180 hubs and Brembo brakes
Exedy Twin Plate Clutch
Complete Fuel Setup
This is a complete setup from the boot to the engine
RCM 340 intank pump with -6 tank cap modification
SM engineering swirl pop -6 inlets - 8 pump feed
All braided hoses with -6 fittings
Bosch 044 inline pump
Billet fuel rails with -6 fittings
Fuel lab fuel filter
Injector Dynamics 1000cc injectors
RCM fuel pressure regulator
STI Rear lights
OMP Champ Bucket Seats and harnesses with Buddyclub low rails
Carbon Door Cards x 4
RS500 Intercooler
XXR530 8.75x18" with R888's
RCM Track Attack Catch Can
2 x 12" Pacet Rad Fans
Prices below:
Type R Shell, Custom Caged, ABW Arches complete with exterior Panels £Provisionally Sold
6 Speed Gearbox Conversion Complete £1,500
XXR 530 Chrome Black 8.75" x 18ET20 R888's 4mm + Tread a + 1 Spare 2mm £950
2.5 Forged Engine, 14 mm Headstuds, Cosworth Pistons, Pauter Rods, Cosworth Sump etc £SOLD
Exedy Twinplate Clutch £600
Garrett GT35R Turbo £SOLD
RCM Twisted Kit £SOLD
AP Racing Front Brakes £SOLD
Airtec RS500 Intercooler £SOLD
OMP Champ Seats, Buddyclub Low rails, Sparco 3" Harnesses £600
Syvecs S6 with Sensors £SOLD
Miltek Centre and Rear Exhaust from Newage 3" £300
ID 1000 Injectors £SOLD
BC Coilovers £SOLD
Fuel System - FPR, RCM 340 In Tank, Bosch 044 External, Swirlpot, Billet Rails, Pipework £600
Carbon Door Cards £SOLD
RCM Track Attack £SOLD
2 x 12" Pacet Rad Fans £180
Contact via PM
Last edited by Matt R; 31 August 2013 at 07:00 PM.
what's your new toy mate? Lol
Trending Topics
09 August 2013, 11:29 PM
#14
Yes and buy this with the money you sell it for
http://www.ebay.co.uk/itm/Subaru-IMP...item5af28d76bf
Last edited by jaygsi; 09 August 2013 at 11:44 PM.
18 August 2013, 04:24 PM
#29
Scooby Regular
Thread Starter
iTrader: (10)
Join Date: Jun 2001
Location: Kent
Posts: 1,238
Likes: 0
Received 0 Likes
on
0 Posts
This is definitely breaking now, fed up with time wasters and dreamers without cash to buy the whole thing complete, people making offers and then disappearing.
Some large parts now have deposits on them, so unfortunately breaking is the only solution at present.
Will update thread this evening with Sold items
Some large parts now have deposits on them, so unfortunately breaking is the only solution at present.
Will update thread this evening with Sold items