View Full Version : Gold Oz Prodrive P-WRC1 18" with Toyo T1Rs


Andy916
14 July 2008, 22:23
SOLD

Set of 4 genuine Oz Prodrive P-WRC1 18" wheels in gold with good Toyo T1R tyres (4.5 to 5.5mm depth, evenly worn). Look awesome on blue scoob.

Pics at Picasa Web Albums - Andy - scoob_bits (http://picasaweb.google.co.uk/adbdba/Scoob_bits?authkey=c2emOAdTVhA) along with other stuff I'm selling. Some kerbing, as you can see on the pics, and the centrecaps have corroded (they all tend to do that). One has some scratching on 2 spokes. Slight fading which you can see up-close.

£400 collected from nr Cambridge/M11/A11.
Email (not PM), to adbdba at gmail.com

SOLD

perx
15 July 2008, 21:09
What size are the tyres?

SamUK
15 July 2008, 23:39
I'l have em....:thumb:



you open to close offers? I am in london..also when can i collect? if a price can be agreed?


Sam

SamUK
15 July 2008, 23:42
Opps...are these for a MY03 sti? or will they fit?

53WRX
15 July 2008, 23:45
They will sam but the tyres will probably be classic fitment for 18's 215/35/18, you also need to check they are rally gold ET46 rather than the normal Gold on an ET53 :)

SamUK
16 July 2008, 00:11
thanks for the info...

i have tyres to go on from my current wheels...but want to make sure the offset etc is correct for my car...

will wait for the seller to confirm i guess...

Andy916
16 July 2008, 12:38
They are indeed ET53 and they have 215/35-18 tyres. Not sure of the shade of gold.

PCD100, so that's pre-05. Does the newage use a lower offset than ET53?

Open to near offers, yes, although am waiting on a reply from one potential buyer at moment.

53WRX
16 July 2008, 13:05
ET53 won't clear brembos on those wheels. STi fitment is ET46 for the PWRC1's:)

b11fyn
16 July 2008, 13:36
Hi guys,

i fitted a set of these to my 02 wrx sti prodrive, your right they wont fit over the brembo calipers unless you fit a set of 5mm spacers to the front.

Ifitted these wheels about 6 months ago and havent had a problem with tyre ware or balance.

hope this helps.

shaun...

Andy916
17 July 2008, 14:17
Still for sale.

ET53 classic fitment, or newage with 5mm spacers as described above.

SamUK
18 July 2008, 11:06
Fitting spacers...sm i ok to assume the drive will not be the same as running on the correct offset without spacers...?>

Andy916
20 July 2008, 12:15
Spacers will merely move them to the correct offset so the dynamics should be the same.

To re-cap - these are correct offset for classic, but with a newage on brembos you need a spacer.

grizz237
21 July 2008, 18:28
swap for a portable air con unit brand new :)


LinkBacks Enabled by vBSEO 3.2.0 © 2008, Crawlability, Inc.