|
View Full Version : A Few Foaming Related Questions. COLZO 28 May 2008, 22:05 Right guys have you went for the 500ml or 1litre bottles for your foam lance? If using Megs Hyper Wash how many dispenser pumps do you stick in? Is the new connector for a Karcher fitting a worth while addition? Any info appreciated. Cheers Colin. RB5 Boyo 28 May 2008, 22:49 I just use the snow foam on its own, about one inch of snow foam in the bottle with the rest water, usually able to get two cars foamed out of it. I use the 1 litre bottle:thumb: SwissTony 28 May 2008, 23:07 Right guys have you went for the 500ml or 1litre bottles for your foam lance? If using Megs Hyper Wash how many dispenser pumps do you stick in? Is the new connector for a Karcher fitting a worth while addition? Any info appreciated. Cheers Colin. Easy to answer as I have done it all :) Go for the litre bottle as the 500ml makes it hard to coat a full car before having to unscrew it and refill. Megs Hyper wash is 400:1 ratio so suffice to say you dont need much. Some people go for just the snow foam and no other wash combo, me, I do about 3 cm of snow foam, about 1cm of hyper wash and the rest of warm water. As for the new karcher attachment, yes every time. It has made my life a lot easier and I dont feel as though I am going to snap the foam lance everytime I twist it off. COLZO 29 May 2008, 08:53 As for the new karcher attachment, yes every time. It has made my life a lot easier and I dont feel as though I am going to snap the foam lance everytime I twist it off. Cheers guys. :thumb: Just to make sure is this the connector (http://www.autobritedirect.co.uk/shop/product_info.php?cPath=246&products_id=1975&osCsid=87bba5bb31e116f3e315f874486c7f2e) I need? SwissTony 29 May 2008, 11:11 Cheers guys. :thumb: Just to make sure is this the connector (http://www.autobritedirect.co.uk/shop/product_info.php?cPath=246&products_id=1975&osCsid=87bba5bb31e116f3e315f874486c7f2e) I need? correct :thumb: You will need some pliers to take off the old brass connector, some ptfe tape to wrap around the thread. I did mine in about 5 mins flat :) COLZO 29 May 2008, 11:14 correct :thumb: You will need some pliers to take off the old brass connector, some ptfe tape to wrap around the thread. I did mine in about 5 mins flat :) Cheers lad. :thumb: |