Finally get round to getting the car to the workshop today .
I'm aiming to build a replica of the 2007 wrc car (visually anyway)
A couple of pics. on the transporter from my mobile . I'll take some more tomorrow so you can see where I'm starting from.
http://i46.photobucket.com/albums/f107/autobodyworks/DSC00206.jpg

http://i46.photobucket.com/albums/f107/autobodyworks/DSC00204.jpg

Can't wait to see the finished project.
If it's like any of your previous cars it will look amazing:thumb:

Can't wait to see the finished project.
If it's like any of your previous cars it will look amazing:thumb:Thanks mate I appreciate that :D

:norty: Subscribed:D

you already know i want to see the results dal
keep the pics coming step by step

budgie:thumb:

Can you give some spec's of the car on the picture...

I see a cage:D

Some strange stripes on the right rear fender...:wonder:
WRC wing's :wonder:

WRC rear bumper...?

WRC rear bumper...?


Yep :norty:

:norty:

Also a rear window wiper...:wonder:

Spec C ??:wonder:

:wonder: Does it have a Roof vent :confused:

:confused: tell us a bit more, Mister ABW :thumb:

Also a rear window wiper...:wonder:

Spec C ??:wonder:

:wonder: Does it have a Roof vent :confused:

:confused: tell us a bit more, Mister ABW :thumb:ok long story this car lol , very long if you have the time , it's a 02 jap spec sti .no roof vent . I put in a safety devices weld in roll cage a couple of years ago . wrc rear bumper thanks to Roger Clarks . rear wing has the scars from the last bodykit .

you already know i want to see the results dal
keep the pics coming step by step

budgie:thumb:no worries mate :thumb:

shes looking sorry for herself she really wants to look like this...

http://i14.photobucket.com/albums/a344/WYLIEI/DSC00102.jpg

Bit late for that now m8

she did look well thou

Looking forward to seeing this turn out as well as the other cars mate:notworthy

looking forward to seeing this one.

I've fitted the front brakes today (prodrive alcons) and finally got all four wheels on . suspension lowered as much as I dare so now I can see where the bodywork has got to be . Wheels are 18" x 8" with an offset of 12 .
I've cut about 30mm off the rear 1/4 panel round the shape of the arch which lines up the shorter wrc rear bumper and also does away with the dogleg . I've also cut the inner arch away so I've got plenty of clearance for suspension travel I'll weld new plates in once I've widened the back .
Not much at the front today a bit of modification on the headlamp panel to fit the hawkeye headlamp , front wings need to be at least 25mm wider and I'll probably cut the arch bigger to match the rears .pics not brilliant I'm afraid
http://i46.photobucket.com/albums/f107/autobodyworks/DSCN0519.jpg
http://i46.photobucket.com/albums/f107/autobodyworks/DSCN0520.jpg
http://i46.photobucket.com/albums/f107/autobodyworks/DSCN0522.jpg
http://i46.photobucket.com/albums/f107/autobodyworks/DSCN0524.jpg
http://i46.photobucket.com/albums/f107/autobodyworks/DSCN0522.jpg

Darren,

I will will following this with keen interest.
I know you will produce a work of art at the end!

Looks good already.. :)

Couple more pics for today . Cut and widened rear 1/4 and rear door . I've started to plate and weld it but I've broke the welder :( so no more fun till tomorrow.
http://i46.photobucket.com/albums/f107/autobodyworks/DSCN0539.jpg

http://i46.photobucket.com/albums/f107/autobodyworks/DSCN0538.jpg
http://i46.photobucket.com/albums/f107/autobodyworks/DSCN0537.jpg

OMG...:eek:

Thants a great idear:thumb:

Why didn't I think of that...:wonder:

Keep up the good work, mate :notworthy

is it easier to cut and weld up the skin rather then bond on a rear arch kit?

in retrospect i wish i had cut the full dogleg off mine before i fitted the 22b arches as i had to go back in and hack them off at a later date, spent ages trying to work out why the tyres were still rubbing and all the paint under the arch was untouched :lol:

is it easier to cut and weld up the skin rather then bond on a rear arch kitNo mate it's not , just fancied a different approach to this one

Oh indeed-a-rooney..

No mate it's not , just fancied a different approach to this one


will be lighter in the end as well :thumb:

subscribed!

Because i want a wrc front bumper :D

cheers marcus

subscribed!

Because i want a wrc front bumper :D

cheers marcus

i think i'm going to want the whole car off him! :lol1:

subscribed!

Because i want a wrc front bumper :D

cheers marcusNext weeks job m8 :thumb:

not too much progress today :( widened fuel flap and a bit more welding
http://i46.photobucket.com/albums/f107/autobodyworks/fuelflap.jpg
http://i46.photobucket.com/albums/f107/autobodyworks/DSCN0542.jpg