Anyone got any ideas as to where to get a PIAA driving lamp loom from? ...Ive tried Subaru & PIAA direct & coming up with zilch, I've tried a few breakers with no joy either :(

Failing that, anyone got any links to a wiring diagram for them ...as I could probably make my own but believe i need 2 relays to wire up an 'overide' switch?

I can provide you with step-by-step instructions for wiring, so long as it's a classic. For a newage, it's a bit more complicated, but searches on here will provide.

Depending what you mean by an "override switch" I could do that too.

I can even provide links to a comapny that sells the relays, connectors, covers, even the cable;)

Any use?

Alcazar

I can provide you with step-by-step instructions for wiring, so long as it's a classic. For a newage, it's a bit more complicated, but searches on here will provide.

Depending what you mean by an "override switch" I could do that too.

I can even provide links to a comapny that sells the relays, connectors, covers, even the cable;)

Any use?

Alcazar

Cheers Alcazar,

Indeed it is for a Classic & by 'over ride' i mean that although i want them to be linked to main beam, i still want to be able to switch them off via my f/fog switch

I've found this thread...

http://bbs.scoobynet.com/lighting-other-electrical-14/642644-fitting-piaa-driving-lamp-kit.html

...but an idiot's guide would be really useful (I did manage to fit my HID's easy enough, but this looks like a different ball game!)

I guess the first place to start is purchasing the bits to make up the loom/harness?

PM'd you.

Alcazar

I fitted the PIAA kit to my classic and the loom supplied didn't work without modification.
If I was doing the job again, I'd make my own wiring setup.

John