View Full Version : removing 2500 wet and dry marks


marklou
01 February 2008, 00:40
im going to fill some stonechips then sand with 2500 and 3000 wet and dry but im unsure of what to use to remove the marks left from the paper.
i have no pc so it will be by hand if possible.
thanks in advance.

Polished Bliss
01 February 2008, 01:10
Menzerna Intensive Polish applied using the white side of a German Pad... plus a lot of elbow grease! :thumb:

Tim Bomford
01 February 2008, 07:21
If possible use an even finer W+D paper but I know this can be hard to get hold of in single quantities..then as Rich says a lot of elbow grease, but good luck

Polished Bliss
01 February 2008, 11:25
Mirka Abralon machine discs come in 4000 grit, and can sometimes be bought in small quantities; I think Jim at Auto Perfection does them. :thumb:

Nickyv4
01 February 2008, 21:28
2000 grit paper would be fine used in a circular motion all u need after that is a small hand held polisher which u can buy from argos or halfords/motorworld which will come with a polish head/pad then some G3 polishing compound. the polisher and compound may come to around £50 but it comes in very handy for even polishing the hole car and brings it up mint, just finish with a little wax for that extra shine.

abralon are great but you really need a machine/DA to get the best out of them.

Nicky

if u cant get hold of any flatting paper in small amounts let me know il sort u out.:thumb:

stoneface
01 February 2008, 21:44
Menzerna Intensive :thumb:


LinkBacks Enabled by vBSEO 3.2.0 © 2008, Crawlability, Inc.