What after market gauges have you fitted

ive got

Mrt knock link

lamco gauge pod
Boost, oil temp and oil pressure

original pod fitted when I bought the car

boost, volts and afr

hks 60 mm on a pillar

boost and egt

yeah 3 boost gauges the 2 pods are located under the head unit in centre console so a bit difficult to watch when driving.
they are well finished pods so I didnt want to mess them up thats why I went for a hks 60mm gauge right where I can see it.

Ive also got an apexi rev speed meter, apexi afc neo, gtec meter and road angel fitted

oh forgot about the greddy profec b boost controller and hks turbo timer ( not yet wired in as it clashes with the alarm system )

i`ve just fitted a 52mm Blitz Boost guage, currently held onto my steering column with insulation tape wrapped round it and the colukmn until my holder arrives and I decide on its final resting place!

i`ve a blitz turbo timer to the left of the steering column below the clocks. stealth :P

i`ve also an Apexi RSM not fitted and for sale :)


nice pods are a nightmare to find. ideally i wanted a lamco column mount guage but hens teeth springs to mind.. or i`ll steal jamies

At the minute Ive just got a 60mm blitz boost gauge fitted in my drivers side air vent and a g-reddy boost controller fitted in the space of the ash tray.

Really thinking about a set of defi's (oil temp/oil pressure/water temp) in a triple pod in the centre of the dash but theyre seriously expensive (prob £500-£600 for gauges, controller and pod)!!
Seen bushi's defi's and that really made me mind up tho, theyre fantastic looking!!:norty: :norty:

Also gonna fit a knock link very soon and an AFR meter also!!:)

60mm defi bf's(white) oil temp,oil pressure and boost held in a zero sports triple carbon hood to retain the standard clock. fitted by performance subaru

Boast, Oil pressure, oil temp swoosh guages in a Miltek centre pod.

An AVC-r in a custom pod attached the map lights, greddy turbo timer set to volts mounted in the ash tray and the powerfc Commander mounted in the arm rest.

I'm searching for a set of 52mm Defi Blue gauges to replace the swoosh items. Can't find them anyway.

'm searching for a set of 52mm Defi Blue gauges to replace the swoosh items. Can't find them anyway.


ask performance subaru or scoobyclinic had them not that long ago mate:thumb:

road angel fitted

How do you find the road angel,does it work well over here.I had a Snooper Sapphire but it didnt seem to pick up on mobile lasers/radar :mad: which would be more in use here than gatso's.Had a Snooper Neo before this and it was spot on,I'm currently looking for a replacement device.

@mad555 - i`ve a road angel in the integra along with a few other odds and sods, and tbh its crap. another device i had used to alert me 5-6 seconds before the road angel decided to go off meaning i`d already been targetted.

all i now use it for is gps speedo.

Speedo is all I use it for too and as a reminder of all those places ive passed and seen a police car hidden down a lane and 2 strange men in the bushes.

remote garage door openers are the way ahead lol

2 fuel pressure
1 oil temp
1 oil pressure
1 water temp
1 fuel temp
1 batt voltage
1 fuel level
1 afr
1 boost
1 knock display
1 egt
1 rpm
1 shift lights

all with adjustable warnings and recall function

that's all from memory.

Its a big dash :D

Boast, Oil pressure, oil temp swoosh guages in a Miltek centre pod.

An AVC-r in a custom pod attached the map lights, greddy turbo timer set to volts mounted in the ash tray and the powerfc Commander mounted in the arm rest.

I'm searching for a set of 52mm Defi Blue gauges to replace the swoosh items. Can't find them anyway.

PM me exactly what you want and the genuine price of it elsewhere and I will beat it or match it, only for members of the NI section :)

2 fuel pressure
1 oil temp
1 oil pressure
1 water temp
1 fuel temp
1 batt voltage
1 fuel level
1 afr
1 boost
1 knock display
1 egt
1 rpm
1 shift lights

all with adjustable warnings and recall function

that's all from memory.

Its a big dash :D

capt jonathan of the starship enterprise

lamco column mount boost guage and that's all lol

bet my ghetto install guage looks better jamie... i`ll take a pic of it before i fit the holder.

just got a lamco boost gauge from the usa - getting a wee custom dial job done then calibrated and lamped in soon!

bet my ghetto install guage looks better jamie... i`ll take a pic of it before i fit the holder.

i must say, you should put it up in the members gallery one off mods section ;)

your use of insulating tape is quite outstanding haha

i`ll take a pic tomoro before i fit it for good :P

new night time pic of defi bf's added to my scooby:hjtwofing

:luxhello: :lol1: :lol1: :lol1: :lol1: :lol1: i have none yeah, dont be silly,keep the weight down ha ha ha

Can you still get Defi Link gauges, i.e. not the BF ones?

yea i beleive you can ask performance subaru

Just waiting to fit my Blitz Boost Pressure Gauge...and A pillar pod atm