Dyney
03 January 2008, 14:46
This is the kit that hangs in the cold air in the wing. It bolts to the MAF and the pipe passes through the inner wing which it is secured too (no cutting or drilling required
Cost new over £200 if you can get one in the UK!! - £90 + P&P Provisionally sold
Top bit of kit.
http://img.photobucket.com/albums/1003/Dyney/P1010027.jpg
http://img.photobucket.com/albums/1003/Dyney/P1010026.jpg
RON
03 January 2008, 16:00
HI Iain..... if you still have this, i'll take it mate.... i already have a K&N ind kit, so i reckon i'll get away with fitting this without a map tweak... worth a try anyway!!
Let me know how you want the money... ie, cheque or paypal..!!
Ron.
Dyney
03 January 2008, 16:16
RON,
I still have it.
YHM ;)
banny sti
03 January 2008, 16:17
I would not put this on without a remap as the airflow hits the sensor at a different angle and will cause the car to run lean.
Banny
RON
03 January 2008, 16:23
Well, i have an afr, so i can gauge what happens, and i always have the option to re-sell it....
No email yet Iain..... you can pm me if you wish!
pippyrips
03 January 2008, 16:24
Completely agree with Banny - no cone filter should be fitted without a remap as part of the package.
pippyrips
03 January 2008, 16:24
Completely agree with Banny - no cone filter should be fitted without a remap as part of the package.
RON
03 January 2008, 16:26
Email received...
I already have a K&N ind kit, and and afr to monitor it.... i'll be careful!!
Tiss
04 January 2008, 19:33
Hi I was just wondering, would it be possible for someone to give me the dimensions of the bracket that holds these filters to the inner-wing as when i bought mine it didn't have a bracket and it rattles around on the wing and annoys the hell out of me so i was going to make one.
Thanks in advance
Chris
RON
04 January 2008, 23:35
Hi I was just wondering, would it be possible for someone to give me the dimensions of the bracket that holds these filters to the inner-wing as when i bought mine it didn't have a bracket and it rattles around on the wing and annoys the hell out of me so i was going to make one.
Thanks in advance
Chris
Well, if iain doesn't measure it for you before he sends it to me, give me a yell in a few days and i'll do so for you...!!
Tiss
05 January 2008, 13:56
cheers mate, i work offshore so when i can get access to tinternet I will let u know, thanks again much appreciated