I am ok to use farecla g3, followed by G10 and machine glaze on my Blue Black Mica paint ?

Always used it on my flat black paint in the past with awesome results !

Just don't want to knacker the laqour ?

:confused:

Do you by any chance have a paint thickness guage or access to one? You really dont want to srtike through the clearcoat/lacquer! Its still guesswork but then it becomes an educated guess as you have no idea if the cars been machined in the past.
G3 is quite aggressive but if your after something less so you cant do much better them Menzerna Polishes.

Tim

Do you by any chance have a paint thickness guage or access to one? You really dont want to srtike through the clearcoat/lacquer! Its still guesswork but then it becomes an educated guess as you have no idea if the cars been machined in the past.
G3 is quite aggressive but if your after something less so you cant do much better them Menzerna Polishes.

Tim

Thanks Tim..

Have only just seen your reply, I have gone for G3 Liquid compound and G10 Finishing Compound.. Will take it very steady and use plenty of water, hopefully it should revive my dead paintwork !

Think I will go for the Zymol after that, going to try for a wet look with the paintwork, but not much point until the weather improves somewhat !