wrx-sok
14 December 2007, 23:51
http://i7.photobucket.com/albums/y293/80gti/DSCF1161.jpg
http://i7.photobucket.com/albums/y293/80gti/DSCF1146.jpg
http://i7.photobucket.com/albums/y293/80gti/DSCF1165.jpg
Bought these today,just screwed them it to see how they looked and I'm very happy:thumb:
They need wired in if anyone can help or recommend someone for the job?
cheers Simon
c0lin
15 December 2007, 00:18
they look the part mate!!
RB5 Boyo
15 December 2007, 11:16
Class looking, hoping to get these myself at some point.:norty:
The defi's are brilliant quality bit of kit. Seen bushi's defi kit all lit up and working and that made my mind up for me!!:thumb:
ulsterscooby
15 December 2007, 13:14
Fitting them is pretty easy hardest part is getting the cables through the bulkhead
Buy one of these
Anodised Oil Temp Adaptor / Sandwich Plate Subaru on eBay, also Engine Tuning Parts, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 04-Jan-08 09:31:34 GMT) (http://cgi.ebay.co.uk/Anodised-Oil-Temp-Adaptor-Sandwich-Plate-Subaru_W0QQitemZ270173658395QQihZ017QQcategoryZ722 05QQrdZ1QQssPageNameZWD1VQQcmdZViewItem)
If you need any help in fitting them im in Antrim and im sure Norman would let us use his premises @ cars n stuff to do the work
Power for the gauges can be taken from behind the head unit or the cigarette lighter just tee into the boost pipework for the boost gauge and then the oil press and temp can be taken from the sandwich plate might as well change your oil when your at it so new oil and filter and
bobs your aunties live in lover
wrx-sok
15 December 2007, 15:41
Fitting them is pretty easy hardest part is getting the cables through the bulkhead
If you need any help in fitting them im in Antrim and im sure Norman would let us use his premises @ cars n stuff to do the work
Power for the gauges can be taken from behind the head unit or the cigarette lighter just tee into the boost pipework for the boost gauge and then the oil press and temp can be taken from the sandwich plate might as well change your oil when your at it so new oil and filter and
bobs your aunties live in lover
Apparently you don't need the sandwich plate with this set-up,you just screw these senders into either side of the block:wonder:
Anyone else fitted them like this?
http://i7.photobucket.com/albums/y293/80gti/DSCF1167.jpg
ulsterscooby
15 December 2007, 16:03
one sender position is under the alternator where the oil pressure switch lives and the other is over piston no 3 left hand side of tmic
Can be quite difficult to get to so the sandwich plate makes it a hell of a lot easier to fit them especially if you want to keep the oem oil pressure warning light
neil.p1
15 December 2007, 20:08
i have the same defis mitill to different on the top of the engine without you losing your oil pressure light
wrx-sok
15 December 2007, 21:20
i have the same defis mitill to different on the top of the engine without you losing your oil pressure light
Neil did you fit the defi's yourself?
bushiwarrior
16 December 2007, 21:55
got mine fitted at performance subaru recently and a very professional job too:thumb:
wrx-sok
16 December 2007, 22:04
got mine fitted at performance subaru recently and a very professional job too:thumb:
There only 10mins over the road mite give him a shout
davey21wagon
17 December 2007, 01:01
nice one they look the dogs balls :norty: