STi 3/4 TMIC with Y.
J&S Electronics Knock Retart Unit with Knock and AFR display. Full instructions. Boxed. New. MY97-00.
STi 3/4 inlet manifold.
STi 3/4 BOV O/E
STi 5/6 BOV O/E
Metal header tank.
Earth kit with power stabiliser. New. Boxed.
STi RA MY97 ECU 6S.
STi RA Coil Pack. M/Y 97
Fuel Rail Adaptor (new).
Pair fuel rails STi RA. M/Y 97
78 deg.C thermostat.
New cold air kit MY01-06 complete with MAF body, cold air pipe, K+N filter, silicon joiner and clamps. (Can adapt for ver 5 or 6 Classic)
MAF for WRX MY93-96. Green Label : AA160
MAF in aluminium tube MY93-96. 72mm ID inlet reducing to 68mm outlet with take off branch for recirc or engine breathers.
MAF for STi 3 orange label. AA271 A36-612 R71 SOLD SOLD SOLD.
Set of 4 16" Subaru Classic wheels in good condition fitted with 4 snow tyres, studless, average 7mm.


If you have an interest in any of these please e-mail me harveysmith1@btopenworld.com

Apexi PFC plus Commander. Three months use. MY 93-96.
J&S Electronics Knock Retart Unit with Knock and AFR display. Full instructions. Boxed. New. MY97-00.
STi 3/4 inlet manifold.
STi 3/4 BOV
STi 5/6 BOV
Metal header tank.
Earth kit with power stabiliser. New. Boxed.
STi RA MY97 ECU 6S.
STi RA Coil Pack.
Fuel Pressure guage (new).
Fuel Rail Adaptor (new).
Pair fuel rails STi RA.
78 deg.C thermostat.
New cold air kit MY01-06 complete with MAF body, cold air pipe, K+N filter, silicon joiner and clamps.
MAF for WRX MY93-96. Green Label : AA160
MAF in aluminium tube MY93-96. 72mm ID inlet reducing to 68mm outlet with take off branch for recirc or engine breathers.
MAF for STi 3 orange label. AA271 A36-612 R71
Set of 4 16" Subaru Classic wheels in good condition fitted with 4 snow tyres, studless, average 7mm.


If you have an interest in any of these please e-mail me harveysmith1@btopenworld.com

Hello mate, will your sti 3 Maf fit my 1998 Type r ? if yes how much for it and where r u located?

If you can give me the designator for the OE 98 Type R ECU (eg. 6S or whatever) I will check it out for you. This ECU, 6S is from a 97 Type R. It will certainly fit but I need your designator for the OE to check if fitment is advisable.

bttt.///

you aint got any cheap front mounts in the garage have you :D

I have several new kits. New Age for you I think? but I also have Classics.

how much for classic fmic????

email sent regarding the MAF

is the STi 5/6 BOV a standard one or aftermarket (read atmos.)?

Got any sti3/4 heads Harvey?

List at top of page updated.
If anybody wants prices etc please e-mail per profile or address at start of thread.STi 5/6 BOV is O/E as is STi 3/4. Also have ver2 O/E BOV.
Sorry Craig but I have no heads for any STis at present but I am looking myself.

bttt.///

PM .

and PM back.

Got any pictures of the wheels? Are they 5 or 6 spokes?

Hi Olly:
I will e-mail you photos tomorrow. They are silver and 10 spoke. ie 5 double spokes per M/Y 95-96 WRX.

bttt.///

bttt.///

bttt.///

bttt.///

Hi Harvey, can you PM me with a price/details/pics of the Cold Air Induction kit please... I take it that its an 'inner-wing' kit where the Filter sits out of the engine bay?? What is the diameter of the pipework for the kit?? :)


Cheers,
Grant