Hi Everyone

We've been doing some secret testing with K&N and have developed an awesome induction kit for the New Age Impreza models.

http://i45.photobucket.com/albums/f63/revolutionmotorstoreuk/Revo-Apollo-6.jpg

The results on K&N's dyno (on a back to back test) showed 16bhp increase on a K&N Panel filter - which equates to approx 21bhp on a std UK car at the wheels!!!
See graph on link.......

http://i45.photobucket.com/albums/f63/revolutionmotorstoreuk/Revo-Apollo-1.jpg

Its a modification to the already well known Apollo universal kit which uses a closed intake rather than an open cone filter thus illiminating most of the heat from the engine bay affecting any performance.

We've modified the kit to include the cold air feed directly from the front bumper on our MY06 model up to the filter (available seperately) and we've also had the AFM housing machined to fit perfectly.
For those who prefer, you can keep you existing fog-covers & fog lamps and leave the cold air feed in the arch liner, but the gains will be slightly less.

We've designed the kit as a 'silent unit' and there is very little noise to be heard even at full boost - only a small noise from the dump-valve when throttling off, so no-one need know what's going on under your hood!!!

Designed for all New Age Turbocharged models in 2.0ltr or 2.5ltr engines. The unit is also capable of handling air flow up to 400bhp for those of you on big BHP builds.

Available in 'stealth black' (as pictured) or 'shiny silver' & we are working on a 'wrinkle red' finish to match the STI inlet manifold but that is planned for next year.
We are launching the kit to all Scoobynet members at a launch price of £149.99 instead of £169.99 for a limited period only and our 1st delivery is due any day now.
So check out the pictures and give us your feedback, we'd appreciate your comments.

http://i45.photobucket.com/albums/f63/revolutionmotorstoreuk/Revo-Apollo-7.jpg

http://i45.photobucket.com/albums/f63/revolutionmotorstoreuk/Revo-Apollo-2.jpg

http://i45.photobucket.com/albums/f63/revolutionmotorstoreuk/Revo-Apollo-3.jpg

As you can see from the picture below - getting into K&N's rolling road isn't the usuall drive on drive off affair !!!!!!

http://i45.photobucket.com/albums/f63/revolutionmotorstoreuk/Revo-Apollo-5.jpg

Colin@revolution

Revolution (http://www.revolution.eu.com)

0191 4770785

Well it sure looks tickety-boo,but wont you need a re-map?

Jon:)

Saw this in the flesh an hour ago. The fit is really very good and looks a nice bit of kit. :thumb:

Well it sure looks tickety-boo,but wont you need a re-map?

Jon:)

No remap needed Jon

Not just for the induction kit anyway, maybe if you were fitting a full exhaust at the same time.

All the emissions etc were checked when on the rolling road and the car performed and ran spot on.

Colin@revolution

0191 4770785

Revolution (http://www.revolution.eu.com)

Will this kit fit a Blob eye?

Will this kit fit a Blob eye?

Hi Neanderthal

The kit will fit all 2.0 & 2.5 New Age turbo models.

Keith@Revolution

Revolution (http://www.revolution.eu.com)

Speak to you on Monday then :D

Gaffer Glenn @ Revolution took me out in this car yesterday. I was SO impressed. The new coilovers that he's fitted are so smooth, no rattly teeth. Very responsive and fookin quick car all round. :thumb:































I've got first dibs when he wants the rawness of a classic for a few hours. S don't bother asking :D :D :lol1:

Sounds like I wizard device. Suprised at the lack of requirement for a remap though. I only ask as I am genuinely interested. I thought you had to account for scaling etc ? I might be talking cack though ? For me an additional remap for this CAI would add £200 so it's a genuine question ?

Induction Kits and ECU Calibration (http://www.ecutek.com/tuning/induction/)

Thanks
Calum

Ordered via the website :D

Hi Cal

K&N said just putting the induction kit on alone would not require a map, but in conjunction with other mods could benefit from this.

Our 06 sti with this kit on was at the Nuurburgring yesterday and currently going around Spa as we speak testing this.

Will let you know how it gets on and relay any feedback to you on thursday when the car is back.

Colin@revolution

0191 4770785

Revolution (http://www.revolution.eu.com)

looks like i need a fiddle job to pay for this col:norty:

looks like i need a fiddle job to pay for this col:norty:


Get those fiddle jobs done lee !!!!!!

Cash jobs pay for bits for your scoob mate

Colin@revolution

0191 4770785

Revolution (http://www.revolution.eu.com)

will revolution fit IK's?

will revolution fit IK's?

Yep, they have a fully kitted out workshop attached to the shop:thumb:

Just got a few questions about this.

Firstly, roughly what bhp increase will I make on a 03 wrx (standard).
Secondly, where does it get its air feed from? (i.e. engine bay or wing).
Thirdly, is this an oiled filter? (cos these seem to be a big no-no with the maf)
Fourthly, whos actually bought and fitted one yet? :)

Thanks :)

Sorry guys, this looks like a nice bit of kit but a seriously doubt you'll see 21bhp with no mapping adjustments.

Very likely with mapping but im not convinced without.. Sorry :(

I've ordered one but I think they're still waiting on a part to be fabricated.
Haven't got a remap yet but I'm planning to hence getting everything in place before hand ;)

Looks good and the gains sound great but I guess this mod is not warranty friendly?

Are there any plans to make a bigger version that will be good for 450+ bhp aplications

Just got a few questions about this.

Firstly, roughly what bhp increase will I make on a 03 wrx (standard).
Secondly, where does it get its air feed from? (i.e. engine bay or wing).
Thirdly, is this an oiled filter? (cos these seem to be a big no-no with the maf)
Fourthly, whos actually bought and fitted one yet? :)

Thanks :)

Hi mate

1, We have not tested on a wrx so could not tell you a bhp for this car although the power gains will be still a good increase.
2, The feed is from the inner wing, although if fog covers are purchased ( see our demo car ) you can take the air feed directly from the front bumper.
3, The filter is very slightly oil'd but is not wet to the touch!
4, We have a few orders in now and currently running one on our 2.5 sti MY06

Thanks

Colin@revolution

Sorry guys, this looks like a nice bit of kit but a seriously doubt you'll see 21bhp with no mapping adjustments.

Very likely with mapping but im not convinced without.. Sorry :(

Hi frayz

The kit is currently fitted to our MY 06 2.5 STi and this is the power the car achieved on K@N's rolling road !!

The car spent 4 days doing 1700 miles testing driving across France, Belgium and Germany, including a day at the Nurburgring and a track day at Spa without any problems what so ever.

Believe me we wouldn't claim something which we didn't have a dyno print out and our own testing on the road to back up.
We have all payed a lot of money for our cars and we wouldn't sell you something which would put your car in any danger.

Our car has not had a remap and still achieved the stated gain, if you choose to buy with a view to getting your car mapped it could possibly help achieve even more !!

I understand it does seem like a massive increase and it supprised us too !!
I remember Glenn ringing us up when he was down at K&N saying " You will never belive the power the STi has just made"
The car is much better to drive now and the difference is noticable.

By all means if you're ever in the area pop in and say hi and we will take you out in the car to feel it for youself !!

After all it was only a few years ago it was unbelievable that we got 39bhp from our 3" Revolution system for a classic. lol

Hope this helps mate

Colin@revolution

0191 4770785

Revolution (http://www.revolution.eu.com)

I've ordered one but I think they're still waiting on a part to be fabricated.
Haven't got a remap yet but I'm planning to hence getting everything in place before hand ;)

Still waiting for the part should be any day now, we were just wanting to get a few miles under the STi's belt first !!

We will ring you when the kit is sent out to you !!

If you have any questions or want to chase it up at any time please feel to ring us

Thanks

Colin@revolution

0191 4770785

Revolution (http://www.revolution.eu.com)

Looks good and the gains sound great but I guess this mod is not warranty friendly?

Hi

I dont think it will be warranty friendly

Please feel free to ask your local Subaru dealer lol

Colin@revolution

0191 4770785

Revolution (http://www.revolution.eu.com)

Are there any plans to make a bigger version that will be good for 450+ bhp aplications

Hi sparkywrx94

Not any plans as of yet, will keep you informed if anything changes !!

Thanks for your enquiry

Colin@revolution

0191 4770785

Revolution (http://www.revolution.eu.com)

Quite happy to wait Colin :D
You're one of the few companies that don't charge till you dispatch http://bbs.scoobynet.com/images/smilies/thumb.gif. I haven't got the cash for a remap yet anyhow! Just improving the car bit by bit.

Regards
Matt

Could be very interested in one of these after Christmas and before my o6 wrx goes for a re map, what effect will it have on the sound of the car ???? Interested to read some customer feedback when/ if any one on here gets one

thanks

:thumb:

Could be very interested in one of these after Christmas
Yeah me too, can you guys let us know when the red version is available please as I may get one sooner than that :norty:

Interested to read some customer feedback when/ if any one on here gets one

thanks

:thumb:
Again, yeah me too :luxhello:

:thumb:

Looks very similar in design to the pipercross vortex kit:)

Looks cool! :cool: