PSI3 Data Monitor Group Buy
PSI3 Data Monitor Group Buy
Running until 31st August 2006
Ths is a group buy for the PSI3 data monitors (VFD version) for Subaru Models MY99+
These are simple to fit and will measure/display a massive range of information as standard from the ECU output and further info such as Pil temp via sensors (not included)
VFD Standard Data Monitor
Single DIN Standard price £315
http://www.psi3.co.uk/index.php?act=...od&productId=2
Group Buy Prices..
£236.35
2001-2006 Pod Mount Standard price £355
http://www.psi3.co.uk/index.php?act=...od&productId=3
Group Buy Prices..
£266.25
1999-2001 Pod Mount Standard price £355
http://www.psi3.co.uk/index.php?act=...od&productId=3
Group Buy Prices..
£266.25
Postage £6.50
ALL PRICES ARE PLUS VAT therefore the total figures are:
Single Din £277.71
2001-2006 Pod Mount £312.84
1999-2001 Pod Mount £312.84
We need at least 10 orders to get these prices.
I will post ordering details shortly. Please could you add your name to the list below to confirm your interest.
1. dynamix - Single Din
2.
3.
4.
5.
6.
7.
8.
9.
10.
Ths is a group buy for the PSI3 data monitors (VFD version) for Subaru Models MY99+
These are simple to fit and will measure/display a massive range of information as standard from the ECU output and further info such as Pil temp via sensors (not included)
VFD Standard Data Monitor
Single DIN Standard price £315
http://www.psi3.co.uk/index.php?act=...od&productId=2
Group Buy Prices..
£236.35
2001-2006 Pod Mount Standard price £355
http://www.psi3.co.uk/index.php?act=...od&productId=3
Group Buy Prices..
£266.25
1999-2001 Pod Mount Standard price £355
http://www.psi3.co.uk/index.php?act=...od&productId=3
Group Buy Prices..
£266.25
Postage £6.50
ALL PRICES ARE PLUS VAT therefore the total figures are:
Single Din £277.71
2001-2006 Pod Mount £312.84
1999-2001 Pod Mount £312.84
We need at least 10 orders to get these prices.
I will post ordering details shortly. Please could you add your name to the list below to confirm your interest.
1. dynamix - Single Din
2.
3.
4.
5.
6.
7.
8.
9.
10.
Last edited by dynamix; Aug 7, 2006 at 09:32 PM.
the sale section shows the LCD version not the VFD version for this group buy - the VFD version is much brighter and can be seen in daylight and at angles whereas the lcd is a little hard to see.
get your name back on the list - you know it makes sense
get your name back on the list - you know it makes sense
Originally Posted by dynamix
In addition to standard diagnostic functions, such as ECU reset and fault code display, several features are included such as the facility for water injection control control. The unit incorporates display of many ECU parameters, such as boost pressure & RPM, and has user adjustable alarm and data recording facilities. Additional sensors can be added to display exhaust gas temperature and oil pressure for example.
Tempting price tho
Tony.
Absolutely for the VFD display...
from the PSI3 website details:
The graphical display one just displays the same info but in graphical form.
from the PSI3 website details:
Standard Subaru VFD single DIN data monitor.
Live Data Monitoring of : - battery voltage, engine speed, vehicle road speed, coolant temperature, intake temperature, injector duration, knock, lambda, throttle postion, boost pressure.
Oil pressure and oil temperature via additional sensors.
Current and historic fault code reading.
ECU and fault code reset.
Shift light control.
User adjustable alarm monitoring of : - battery voltage high and low, boost pressure, coolant temperature, oil pressure and temperature via additional sensors.
Water injection/nitrous control.
Record peak reading for engine speed, boost pressure, road speed and coolant temperature.
Clock.
Plug and play fitment.
User selectable options for unit display ie. bar or psi, degrees c or degrees f, mph or kph.
Supplied in genuine Subaru single DIN enclosure with blue display, black buttons, black front panel, user manual, OBD interface lead, cable ties and sticker.
Live Data Monitoring of : - battery voltage, engine speed, vehicle road speed, coolant temperature, intake temperature, injector duration, knock, lambda, throttle postion, boost pressure.
Oil pressure and oil temperature via additional sensors.
Current and historic fault code reading.
ECU and fault code reset.
Shift light control.
User adjustable alarm monitoring of : - battery voltage high and low, boost pressure, coolant temperature, oil pressure and temperature via additional sensors.
Water injection/nitrous control.
Record peak reading for engine speed, boost pressure, road speed and coolant temperature.
Clock.
Plug and play fitment.
User selectable options for unit display ie. bar or psi, degrees c or degrees f, mph or kph.
Supplied in genuine Subaru single DIN enclosure with blue display, black buttons, black front panel, user manual, OBD interface lead, cable ties and sticker.
Trending Topics
I may be missing something here but.... where in that description does it say it will display EGT and record data like first posted?
From reading previous descriptions the additional features of the graphical VFD over the normal VFD are it will take EGT and fuel pressure sensor inputs and also record data (as well as have a nice graphical display).
Simon needs to confirm that obviously. Either way still a very good price, but the data recording features would be attractive
Tony.
From reading previous descriptions the additional features of the graphical VFD over the normal VFD are it will take EGT and fuel pressure sensor inputs and also record data (as well as have a nice graphical display).
Simon needs to confirm that obviously. Either way still a very good price, but the data recording features would be attractive
Tony.
Scooby Regular
Joined: Mar 2001
Posts: 1,529
Likes: 0
From: Glos UK. - Manufacturers of ECU Data Monitors.
EGT and Fuel Pressure are only available on the Graphical units NOT standard VFD units that are part of this group buy, EXCEPT on post 2001 WRX ( not STi ) models that do display EGT via the ECU,.
All units show a peak reading for engine speed, boost pressure, road speed and coolant temperature.
Oil pressure and temperature peaks are shown if additional sensors are fitted.
Simon
www.psi3.co.uk
All units show a peak reading for engine speed, boost pressure, road speed and coolant temperature.
Oil pressure and temperature peaks are shown if additional sensors are fitted.
Simon
www.psi3.co.uk
Nevermind... i was thinking of actually logging data, which could be downloaded at a later date. Maybe CSV file which could be imported into Deltadash via a SD card.
A future feature Simon
Tony.
A future feature Simon
Tony.
Scooby Regular
Joined: Jan 2003
Posts: 3,190
Likes: 0
From: 535D M-Sport Touring
Maybe interested and have a few questions:
Would be after one for a MY00 Classic, I assume that price includes the pod?
Any chance of a group buy price for the oil temp / pressure sensor kit?
Can we choose the colour of our VFD, I notice on the PSI site it says they come in blue, you can then buy filter for other colours for £5. I'd prefer green and would sacrifice the blue option for £5.
Other than that need to consult the bank manager
Cheers,
Graz
Would be after one for a MY00 Classic, I assume that price includes the pod?
Any chance of a group buy price for the oil temp / pressure sensor kit?
Can we choose the colour of our VFD, I notice on the PSI site it says they come in blue, you can then buy filter for other colours for £5. I'd prefer green and would sacrifice the blue option for £5.
Other than that need to consult the bank manager
Cheers,
Graz
Scooby Regular
iTrader: (2)
Joined: Aug 2005
Posts: 821
Likes: 0
From: Welcome home; Keano, Defoe & Chimmy...
Hmm tempted
Hmmm very tempted
Couple of questions myself though- I have a MY05-
Can oil sensors be easily fitted after (ie when ive saved up) installation?
I have a lot of wiring in behind and below the DIN space - this would replace my forester flap- (ipod adaptor and its wires) does the PSI3 have much more?
Can you, for instance, set it up to display rpm AND boost, rpm and temps at the same time, etc for comparative purposes?
Whereabouts are you for installation?
Cheers
Trevor
Couple of questions myself though- I have a MY05-
Can oil sensors be easily fitted after (ie when ive saved up) installation?
I have a lot of wiring in behind and below the DIN space - this would replace my forester flap- (ipod adaptor and its wires) does the PSI3 have much more?
Can you, for instance, set it up to display rpm AND boost, rpm and temps at the same time, etc for comparative purposes?
Whereabouts are you for installation?
Cheers
Trevor
My mate recently fitted a PSI3 unit. It only has a single cable that plugs into the OBD socket under the steering column. He has placed it in the standard radio slot along with a single DIN headunit, so yes it will replace your pocket without a problem.
Simon will be able to answer all the other points of course.
Andy.
Simon will be able to answer all the other points of course.
Andy.
Scooby Regular
Joined: Mar 2001
Posts: 1,529
Likes: 0
From: Glos UK. - Manufacturers of ECU Data Monitors.
Originally Posted by T123VOR
Hmmm very tempted
Couple of questions myself though- I have a MY05-
Can oil sensors be easily fitted after (ie when ive saved up) installation?
I have a lot of wiring in behind and below the DIN space - this would replace my forester flap- (ipod adaptor and its wires) does the PSI3 have much more?
Can you, for instance, set it up to display rpm AND boost, rpm and temps at the same time, etc for comparative purposes?
Whereabouts are you for installation?
Cheers
Trevor
Couple of questions myself though- I have a MY05-
Can oil sensors be easily fitted after (ie when ive saved up) installation?
I have a lot of wiring in behind and below the DIN space - this would replace my forester flap- (ipod adaptor and its wires) does the PSI3 have much more?
Can you, for instance, set it up to display rpm AND boost, rpm and temps at the same time, etc for comparative purposes?
Whereabouts are you for installation?
Cheers
Trevor
As stated above one cable for the OBD interface, this provides power, ground and signal.
You can display up to 4 items on a page, these are user configurable.
We are based in Stonehouse, Gloucestershire - 5 minutes from M5 J13.
Fizz, oil temp only £67.50 + vat. there is a massive range of colour for the VFD filter material, we prefer the blue because it seems to be the brightest, white is an option, it you want to come down you can have a look at the samples we have on a working unit.
Simon
Scooby Regular
Joined: Mar 2001
Posts: 1,529
Likes: 0
From: Glos UK. - Manufacturers of ECU Data Monitors.
Originally Posted by dazzer98
hi
i got a 98 wrx, can i get the same deal for my car as the 99-01, or is it alot different
cheers
dazzer
i got a 98 wrx, can i get the same deal for my car as the 99-01, or is it alot different
cheers
dazzer
We offer a full refund if your car is in the latter group.
Simon