|
View Full Version : removing std cd unit from bugeye deedud 18 May 2006, 23:46 Ok looked at all the links and pics on FAQ ... But can't find any info on how to take my std unit out of the consul :wonder: :wonder: someone please help as i now have the forester pocket and new head unit ready to fit :rolleyes: and dont want to start pulling all the wrong bits !!!! Tony MY03WRX 19 May 2006, 06:37 Here you go m8......http://www.chiark.com/scooby/icetoc.asp?section=5&subsection=9 BTW this is in the FAQ sticky....:D:D:D:D:D:D deedud 19 May 2006, 09:22 Cheers for that Tony :thumb: must be going blind in my old age :Suspiciou deedud 19 May 2006, 09:28 Here you go m8......http://www.chiark.com/scooby/icetoc.asp?section=5&subsection=9 BTW this is in the FAQ sticky....:D:D:D:D:D:D Tony... fancy a trip down to poole to fit one more !!!!!!! are pay your fuel money and buy you a beer ;) ;) Tony MY03WRX 19 May 2006, 12:59 M8 its a piece of pi$$ to remove and the only tricky bit to fitting the Forrester pocket is drilling 2 new holes to mount it to the cradle :):) If I still lived in Blandford, I would have poped over and give you a hand, but I'm about an hour and a bit away now... PM me if you need any help m8 and I'll see what I can do... Here's a pic of mine fitted http://img.photobucket.com/albums/v16/tony4052@hotmail.com/car_small_006.jpg deedud 19 May 2006, 18:31 M8 its a piece of pi$$ to remove and the only tricky bit to fitting the Forrester pocket is drilling 2 new holes to mount it to the cradle :):) If I still lived in Blandford, I would have poped over and give you a hand, but I'm about an hour and a bit away now... PM me if you need any help m8 and I'll see what I can do... Here's a pic of mine fitted http://img.photobucket.com/albums/v16/tony4052@hotmail.com/car_small_006.jpg No probs.. cheers for the pics :thumb: will have a go this weekend. |