We currently have the following special offers..
Amp
XXV-02A ( limited availibility ) £240
http://www.kenwood-electronics.co.uk...k3=106&pr=1859 (http://www.kenwood-electronics.co.uk/products/ListProduct.aspx?k1=2&k2=31&k3=106&pr=1859)

Headunit
KDC-W8534 £305
http://www.kenwood-electronics.co.uk...&k3=23&pr=2303 (http://www.kenwood-electronics.co.uk/products/ListProduct.aspx?k1=2&k2=4&k3=23&pr=2303)

Speakers
KFC-WDA69RC £135
http://www.kenwood-electronics.co.uk...&k3=54&pr=1610 (http://www.kenwood-electronics.co.uk/products/ListProduct.aspx?k1=2&k2=7&k3=54&pr=1610)

KFC-PS1300 £85.50
130mm, Performance series, 2 way, 2 speaker system, 180w peak power.

KFC-PSR137C £80.00
http://www.kenwood-electronics.co.uk...7&k3=33&pr=264 (http://www.kenwood-electronics.co.uk/products/ListProduct.aspx?k1=2&k2=7&k3=33&pr=264)

iPOD Interface
KCA-IP500 £55.00
http://www.kenwood-electronics.co.uk...&k3=58&pr=1847 (http://www.kenwood-electronics.co.uk/products/ListProduct.aspx?k1=2&k2=19&k3=58&pr=1847)

Non Kenwood
Subaru ISO adaptors (vehicle wiring to headunit) £7.50

PSi3
Single DIN LCD data monitor £200
Pre '01 Pod Mount LCD data monitor £245
Post '01 Pod Mount LCD data monitor £255

Monitor multiple parameters from your cars ECU, including –Boost, RPM, MPH, water temperature, throttle position, battery voltage, oil pressure, oil temperature, air fuel ratio, knock, etc..
Fault code reading.
ECU reset.
User alarm setting for boost, oil pressure, oil temperature, battery voltage.
Record peak levels.
Plug and play fitting – no cutting of cables just plug in to OBD socket.
All monitors supplied with OEM Subaru enclosure.
Control nitrous/water injection.
Shift/warning light output.
Up-gradeable software
Oil Pressure and Oil Temperature require additional sensors.Picture of single DIN LCD data monitor... http://i48.photobucket.com/albums/f229/PSi3/neg.jpg
Can be supplied with red, blue, grey or black buttons.


All prices include VAT and UK mainland delivery.

These prices are only available for a limited period.

Simon
01453 793011 / 07796 992992

will the data monitor fit a 95 wrx ecu?
what aftermarket ecu does it support?
do you have a wbsite?

will the data monitor fit a 95 wrx ecu?
what aftermarket ecu does it support?
do you have a wbsite?

Sorry, data monitors will only work with Post 1998 OBD II enabled vehicles.
We are also working on a Autronic ECU version.

Website has just been updated and is still having data added. www.psi3.co.uk

Simon

Do they simply plug in under the steering colum on a Classic MY00 as they do with the later models ? also how much are the additional sensors for oil pressure and temp ?

Thanks
Simon :D

Do they simply plug in under the steering colum on a Classic MY00 as they do with the later models ? also how much are the additional sensors for oil pressure and temp ?

Thanks
Simon :D

Oil pressure/temp sensors are £170 + VAT for the pair and it is simple plug and play .... read this on another thread!! :thumb:

Oil pressure/temp sensors are £170 + VAT for the pair and it is simple plug and play .... read this on another thread!! :thumb:

Damn that was quick :D :thumb: Just when you think spending has been controlled :norty:

Damn that was quick :D :thumb: Just when you think spending has been controlled :norty:

Tell me about it mate!! :cry: