Anybody up for a Group Buy on this?

Its meant to be the Best Induction Kit going.

This is the Info from The APS site:

The APS smooth bore cast aluminium cold air intake system and K&N air filter delivers a huge volume of cool air to the turbo charger for maximum engine performance.
Originally developed to enhance the Version 5 STI, this APS cold air intake system is certainly the most cost effective way to achieve greater air flow, great looks and fantastic sound. Unlike ram pods which source hot air from under the bonnet, the APS system breathes cool air from the inner guard for the optimum engine performance and durability. More importantly the air through the APS high flow air intake system is consistent in temperature. This means that the engine management unit's temperature compensation system operates correctly - unlike devices that source air from the highly turbulent areas under bonnet.

And, it's easy to install with no cutting or drilling required.

It is also MAF friendly.

Pics and more info available on the APS website:
http://www.aps-wrx.com/wrx/airfilter.htm

Normal Price is £159+VAT, but if there are enough people interested, this can be brought down quite abit.

This group buy is open to owners of all types and ages of Impreza.

Add your names on list below with what type and year of Impreza you have.

99 turbo version please . Anybody up for a Group Buy on this?

Its meant to be the Best Induction Kit going.

This is the Info from The APS site:

The APS smooth bore cast aluminium cold air intake system and K&N air filter delivers a huge volume of cool air to the turbo charger for maximum engine performance.
Originally developed to enhance the Version 5 STI, this APS cold air intake system is certainly the most cost effective way to achieve greater air flow, great looks and fantastic sound. Unlike ram pods which source hot air from under the bonnet, the APS system breathes cool air from the inner guard for the optimum engine performance and durability. More importantly the air through the APS high flow air intake system is consistent in temperature. This means that the engine management unit's temperature compensation system operates correctly - unlike devices that source air from the highly turbulent areas under bonnet.

And, it's easy to install with no cutting or drilling required.

It is also MAF friendly.
Normal Price is £159, but if there are enough people interested, this can be brought down quite abit.

Depending on how much interest there is in this, then i will phone up for prices from WRC Technologies and G-Force Motorsport on Monday.

Yes im up for it !!


1. Cyprusscoobie
2. Dannno --------- MY99
3. Jc scoob ------- MY99

Would the kit fit a MY97 STI?

Would the kit fit a MY97 STI?
According to the APS website, the induction kit for the MY97 Scoob will fit both the WRX and STi. Its only the later Classics that require different kits for the WRX/Turbo and STi.

I will confirm all this when I phone them on Monday mate.:thumb:

Might be up for this depending on price for my00.

Anybody else up for this Group Buy?

Phoning for prices tomorrow.

Could be interested but need prices (MY99 UK Turbo)

Craig

Same here dependant on price

Will it fit with a fmic piping in through the wing?

Coulster

i have FMIC so would also like to know if it fits with a front mount.

Craig

do a search, this has to be mapped on, as its NOT maf friendly as a plug and play peice of kit.

Hi, i'm interested.

I presume this is the "aps high flow air intake" as described in the snet shop and not the "aps cold air feed"? Whats the difference between them, apart from price?

Cheers,
Doug.

my00 Sti.

Hi, i'm interested.

I presume this is the "aps high flow air intake" as described in the snet shop and not the "aps cold air feed"? Whats the difference between them, apart from price?

Cheers,
Doug.

my00 Sti.I dunno mate! I'm confused!:freak3:

I will phone up and clarify all this tomorrow.
Hope Iraqs going ok for you mate, and your Scoob is getting sorted!

Ok, maybe I'm being stupid, but what is a FMIC?

Ok, maybe I'm being stupid, but what is a FMIC?


Ford Mondeo Injection Coupe... :freak3: ...or could be Front mounted inter cooler..

Been thinking about one of these,if the price is good would consider getting one now,to install at later date. :)

I am very interested depending on how much discount you can get :D (MY03 STI)

Right so the list so far of intersted people is as follows:


1. CyprusScooby - MY99STi
2. Dannno - MY99
3. jc scoob - MY99
4. banny sti - MY97STi
5. wildfire - MY00
6. Heple - MY99
7. Coulster
8. doug2507 - MY00STi
9. Rooferman
10. aaronhowe - MY03STi

Anybody else thats interested in this Group buy, add your names, above, as I intend phoning for prices today.:thumb:

For info, this is my APS CAK fitted (MY99)

http://img.photobucket.com/albums/0903/kstanton/Dscf0088.jpg

http://img.photobucket.com/albums/0903/kstanton/APS.jpg

and blanking plug from your local subaru dealer
subaru part # 46059FA000
£7.23 inc vat
http://img.photobucket.com/albums/0903/kstanton/Dscf0015.jpg

and a samco air hose from Roger clarks (part number SHO38).
all in inc. VAT and delivery (registered 1st class) was £68.02
please note that there isn't the breather connection on the underneath of the pipe. i'm running without the carbon canister so it was another pipe i could get rid of.

dp
:)

Cheers for that mate.:thumb:

Put me down for one if the price is right.
burns - MY99 uk

Right, after much phoning about and speaking to loads of Specialists and Companies, there are no APS kits available in the country. An there will not be any available for some time.

After speaking to Olly Clark at Roger Clark Motorsport, he suggested the RCM01/RCM04 Kit.

Unlike the APS Kit, this kit does NOT require a re-map after fitting and is totally MAF friendly. Although it does not fit into the inner wing like the APS kit where the air is cooler, it has a much larger Cone Filter and therefore has a much better and bigger air flow. This is the kit of choice for all their project & Rally cars.

http://www.rogerclarkmotorsport.co.uk (http://www.rogerclarkmotorsport.co.uk/)

The kit is cheaper as well, coming in at £144+VAT, but of course they are willing to give us a good Group Buy price.

The Graham Goode Racing Induction kit, is the same set up as the RCM kit and retails for £144.69+VAT. They are not too keen on Group Buys, but might consider it.

I will also be consulting with Andy F. for advice.
I need to know definate numbers by tomorrow if possible.
Thanks,
Ewan.:thumb:

Ford Mondeo Injection Coupe... :freak3: ...or could be Front mounted inter cooler..

Been thinking about one of these,if the price is good would consider getting one now,to install at later date. :)
there's a group buy going on for a FMIC right now, a superb way of getting a quality one at a very good price :norty: (and yes i have my name down)

Right so the list so far of intersted people is as follows:


1. CyprusScooby - MY99STi
2. Dannno - MY99
3. jc scoob - MY99
4. banny sti - MY97STi
5. wildfire - MY00
6. Heple - MY99
7. Coulster
8. doug2507 - MY00STi
9. Rooferman
10. aaronhowe - MY03STi
11. djviper-thc - MY99
12. burns - MY99

Anybody else thats interested in this Group buy, add your names, above, as I intend phoning for prices today.:thumb:

Right so the list so far of intersted people is as follows:


1. CyprusScooby - MY99STi
2. Dannno - MY99
3. jc scoob - MY99
4. banny sti - MY97STi
5. wildfire - MY00
6. Heple - MY99
7. Coulster
8. doug2507 - MY00STi
9. Rooferman
10. aaronhowe - MY03STi
11. djviper-thc - MY99
12. burns - MY99

Anybody else thats interested in this Group buy, add your names, above, as I intend phoning for prices today.:thumb:

13. Spen555 - MY03STi JDM.

I want the RCM induction kit which is the standard size fit to the inlet.

Cheers,

Damian.

13. Spen555 - MY03STi JDM.

I want the RCM induction kit which is the standard size fit to the inlet.

Cheers,

Damian.
Ok mate. I will add you. Yeah the kit fits staright on and take about 10 mins to fit. No cutting, drilling, preping, etc. required. I think the kit for your car retails at around £175, but we would be able to get the price down with the Group Buy. Look on the RCM website at the kit for your car, as you can get a really good one with the coloured hoses!:D

Right so the list of interested people so far is as follows:


1. CyprusScooby - MY99STi
2. Dannno - MY99
3. jc scoob - MY99
4. banny sti - MY97STi
5. wildfire - MY00
6. Heple - MY99
7. Coulster
8. doug2507 - MY00STi
9. Rooferman
10. aaronhowe - MY03STi
11. djviper-thc - MY99
12. burns - MY99
13. SPEN555 - MY03STi

Anybody else thats interested in this Group buy, add your names, above, as I intend phoning for prices today.:thumb:

sorry m8 I am only interested in the aps kit, and personally i dont mind waiting, I think it is a good thing that the car needs a remap after fitting as it shows that it does make a significent difference to air flow and hence fueling will need to be upped to match.Right, after much phoning about and speaking to loads of Specialists and Companies, there are no APS kits available in the country. An there will not be any available for some time.

After speaking to Olly Clark at Roger Clark Motorsport, he suggested the RCM01/RCM04 Kit.

Unlike the APS Kit, this kit does NOT require a re-map after fitting and is totally MAF friendly. Although it does not fit into the inner wing like the APS kit where the air is cooler, it has a much larger Cone Filter and therefore has a much better and bigger air flow. This is the kit of choice for all their project & Rally cars.

http://www.rogerclarkmotorsport.co.uk (http://www.rogerclarkmotorsport.co.uk/)

The kit is cheaper as well, coming in at £144+VAT, but of course they are willing to give us a good Group Buy price.

The Graham Goode Racing Induction kit, is the same set up as the RCM kit and retails for £144.69+VAT. They are not too keen on Group Buys, but might consider it.

I will also be consulting with Andy F. for advice.
I need to know definate numbers by tomorrow if possible.
Thanks,
Ewan.:thumb:

Same here only interested in the APS item.

Craig

Sorry mate, was only interested in the APS kit as I already have the K&N on my 99 turbo.

Cheers

Coulster