as title says how long should i allow to remove old springs and fit new eibach
springs also how hard is it to get to rear suspension tops
thanks for any help
tony

 

How handy are you and do you have the proper tools?

Had mine done at Powerstation and it took a few hours (with geometry).

 

will have works service van full of tools and got spring compressors

 

If your handy then about 4 hours. Allowing for problems.

Take the back seat out and lift the parcel shelf and bingo there are the top mounts.
*Tip* Loosen the strut centre nut on the car if you can!
*Tip* Mark the head of the camber bolt on the front before you undo it. Will help you get the geom close to the previous settings.

 

thanks guys for all the advice just hope weather is good next weekend
tony