DimitrisSti8
02 October 2004, 02:16
I think I am having problems with my alignment settings.
I would appreciate your feedback on your settings for the MY04 STi.
Should I max out negative camber in the front?
what about the rear?
What camber are you using and do you have completely parallel wheels or -1mm toe out in the rear as some people suggest?
What are the factory settings?
thank you very much
Dimitrios
prana
02 October 2004, 09:23
I think I am having problems with my alignment settings.
I would appreciate your feedback on your settings for the MY04 STi.
Should I max out negative camber in the front?
what about the rear?
What camber are you using and do you have completely parallel wheels or -1mm toe out in the rear as some people suggest?
What are the factory settings?
thank you very much
Dimitrios
The Australian User manual has the specs, look there.....
RRH
03 October 2004, 18:04
Max neg camber all round, be careful with rear caster as toe out will make it more tail-happy.
JIM THEO
04 October 2004, 10:42
Usualy on STI you don't need toe out rear as it is already tail-happy, just max camber front with factory rear.
It all depends from your driving style, read the technical articles from Whiteline's site.
JIM
MY04STi
06 October 2004, 06:57
I have just taken may car out on the track for the first time now that all the suspension components have been fitted.
I have the following geometry (using camber bolts only):
Front -2.5 Deg
Rear -2.0 Deg
I currently do not have any rear toe out as the car feels quite neutral.
Also fitted is:
Whiteline Group 4 Coil overs (I belive they are made by AST)
Front anti roll bar (apologies but I forget the size)
Rear 24mm anti roll bar
Hope this helps.
JIM THEO
31 October 2004, 11:07
With Koni inserts, both AST and Whitelines...:)
JIM