Hi guys an gals
Just purchased some second hand 4 pot calipers with half worn mintex pads and godspeed 294ml discs(done about 1500mls)
Would it be ok to fit them and use the mintex pads that have came with the calipers\discs ?????????????????????

Also which 4 pots come painted red from the factory ??????????????
Thanks in advance

 

Technically it would have been nice to know exactly whi8ch pad was where when fitted to the previous car, but if you fit tham you should bear in mind that the pads might need bedding in slightly, red calipers=22B!!! But that doesn't make them any better than any other standard 4 pots!

 

Thanks for the reply
The numbers on the back of the pads are mbd 1416 ?? Do these numbers mean anything ?????
I was told by the seller the calipers were from a 2000 sti?
Thanks

 

Anyone ???????????????????/

 

MDB1416 is simply the part number that Mintex assign to the Subaru 4pot shape...............there is normally another number as well, like 1144, 1155, etc. if they are more perf. orientated.............

personally find the Mintex 1100 series of materials a little old hat now, although they are quite reasonably priced...............

alyn - asperformance.com

 

The number rings a bell for the four pot pads, there should be a '1144' or '1155' type number aswell.
200 sti could mean anything, but only the 22b's ever had red calipers!

 

Sorry Alyn, it took me a while to type that, browsign with tioo many windows open, tut, tut!

 

LOL.............no worries RON looks like we are on the same wave length anyhow........................must be right!!??

 

Lets hope so eh........