View Full Version : OBX equal length headers!


chrome
12 September 2004, 11:34
OBX equal length headers with flexi upipe and bungs...

I have not got any pics to hand- due to come off the car in around 10 days or thereabouts!

Add torque and power, particularly noticeable difference in the upper rev ranges (ie: mental over 4.5K, and pulls like a train!)

£320 inc 24hr delivery!

Email as per profile please :)

Roojai
12 September 2004, 21:48
what car do they fit

stevebt
12 September 2004, 21:56
all impreza's , but not too sure about the newest shape :D

chrome
13 September 2004, 07:44
bttt !!

(fits '02 for sure- would expect they fit 03/04 also..)

:)

stevey
13 September 2004, 18:51
will they fit a my96 pm if so

chrome
14 September 2004, 12:17
bttt :)

chrome
14 September 2004, 21:31
boing

P20SPD
15 September 2004, 09:31
excellent headers, worked very well on my 2litre, would be very good on a 2.5!

chrome
15 September 2004, 12:29
btw- worth noting that compared to gruppeS- Power band is a bit higher up, not narrower.
If you have relevant mods (ie: big turbo/2.5l) this can be a big benefit..

Yes- they do hang lower than GS/OE.

They dont need wrapping. already done.
I think that £320 ono inc 24hr delivery is pretty reasonable considering the wrap etc can cost around £50 (thats being a skinflint too!) in total and the time to do it, and the fact that delivery is £20!.. :)

chrome
15 September 2004, 17:59
back up she goes...

chrome
16 September 2004, 07:46
headers are at the top of this pic- although they only stay shiny when they are unused
http://www.djfuz.co.uk/ex.jpg

chrome
16 September 2004, 12:25
bttt

vnny66
16 September 2004, 19:58
have u still got these headers? will they fit my95 wrx import? heard abit about these headers cracking or splitting or is that not true?

chrome
16 September 2004, 20:31
yes yes and no (where on earth did you hear that? :eek2:
I know of several very high power (400bhp+) scoobs that use/used them with no such result.. ??

pm/email me for more info if you want mate ;)


bttt

chrome
17 September 2004, 18:13
bttt for some bargain headers ;)

TKH
18 September 2004, 09:40
I have tried to mail you re Headers but your email account is down

Could you answer 2 questions
1. What power gain approx 20-30 ?
2. Did you completley loose the burble?

Thanks
Tim

chrome
18 September 2004, 14:41
yhpm with my other email... (also- PM me here)
1. approx- could be more, could be less... depends on other supporting mods..
2. a bit - with a blitz nur spec for example it will still be burbly ish, but if you use say a hiper it sounds less burble'y (is that a word?) and more like an big bike

RB5108
19 September 2004, 22:22
Sent you a mail.

chrome
20 September 2004, 08:21
yhm chap.

RB5108
20 September 2004, 19:58
Yhm back

Sold to Kevin without the mrs knowing :D

chrome
20 September 2004, 22:10
er- if I can get hold of kevin.. :D
rang @ 2200 twice- but both times got phone put down on me without him even answering! :(
ask him to check his voice mail.

chrome
20 September 2004, 22:30
SOLD to Kevin via RB5108


LinkBacks Enabled by vBSEO 3.2.0 © 2008, Crawlability, Inc.