In relation to the wiring of a pioneer HU. If the blue cable is being used for the 'power antenna' wire, where do i attach the wire for the amp remote.

Thanks

Same wire, unless there's one specifically labelled "amp remote" or something like that.

There used to be two separate wires, for those h/us which only turn the aeriel on when the radio is being used and turn it off when not, but that's really quite rare...

Same wire, unless there's one specifically labelled "amp remote" or something like that.

There used to be two separate wires, for those h/us which only turn the aeriel on when the radio is being used and turn it off when not, but that's really quite rare...


Yes i do have a wire labelled 'system remote control' which i assume is the same'amp remote'.

The hu did not have a iso plug just open wires so i bought a iso adpator (one end open wires the other iso head ) wired that up so it plugs straight into the pc2444 harness.

Before i just plug the power antenna wire into the 'system remote control'. But now i have a amp, so if thats taken up by the remote wire. Then i still have a unattached power antenna wire.

Is it ok to wire them both to the wire labelled 'system remote control'?

Yup. The current draw is tiny. If you're worried, then put a relay in but you really shouldn't need it.

Yup. The current draw is tiny. If you're worried, then put a relay in but you really shouldn't need it.

Thanks for the advice and your ICE website has been a great help aswell : )