I will check tomorrow

 

do you still have the ecu for sale ? if so how much and how many pins is it?

 

If avalible and the right price I would like the following

Rear ARB and mounting brackets, droplinks, lower track control arms, upper eccentric bolts and lower retaining bolts. (To add a Rear arb onto a sport )

And also rear hubs/discs/calipers/pads/handbrake cable etc if the price is right(Rear disc conversion for a sport)

 

Door Pin and Bolt for Rear Seat
I am after the following:

The silver pin that stops the door from opening too far

http://www.geocities.com/etalkar/Door_Pin.JPG





A Bolt and washer for the rear seat

http://www.geocities.com/etalkar/Seat_Bolt.JPG



Looking to pay max £5 including delivery. Please help!

Cheers!

HomerJ.

 

I still have the ecu

It has 4 plugs.

PT NO:V5 22611 AB530 A18 000 RJ4

If this is what you need then pm me

 

I have pretty much every thing except for the roll bar itself and a few bolts.

I have the hubs,vented discs,callipers etc aswell.

 

I havent had a chance to look,but Im 99% sure I have these.

 

Can you PM me with details of where to send the cheque to and who to make it out to?

Cheers.

Homerjunior.

 

Hi

Do you still have the brackets that hold the top spoiler to the rear window? Also the gearshift and stereo surround with the clock built in, if it looks like this:



£15 for both delivered?

Cheers,

Ben

 

I have a standard ARB, but will probably fit a whiteline one anyway, its more the mounting hardwear that I am after.

So could I have a price inculding postage for just the ARB stuff and also for all the rear hubs/brakes etc?

And how long have they been sitting off the car, have the calipers seized, is there any life left in the discs/pads, what pads are they. How many miles has the car done and do you know the condition of the wheel bearings??? Sorry to ask lots of questions but would like to know before shelling out any cash!!!

 

Dont have this

sorry mate

 

Probably better if you can call me on 07970 546 405(during the day)

And I will discuss it with you

 

Are the front brake discs (294mm size) still available and what conditon are they in?

Thanks
Paul

 

Any news on the folding mirrors mate?

 

Sorry mate,I was going to compare it to legacy switch or one from a nissan,but didnt get round to it.

In short I dont have one,but I was going to find out if it is the same as anything else

 

I havent measured them but they are the type to suit 2 pot callipers.

I will measure them on monday.

 

can i have the arm rest that fits around the hand brake please.

people have said that they dont come with them but I beleive some do as every WRX I have seen has them - 94/95/96/97.

if yours has one and has not been sold as of yet, please let me know.

 

Hi,

I really really grew bored of intensely checking the posts after the third page, so apologies if this has already gone. Do you have the plastic shroud that fits underneath the steering column? (I am a newbie to Subarus, this will fit my 1994 1.6 Estate?)

If you have, wurlyvalve@yahoo.co.uk should get me, thanks.

Glen.

 

Yes I have the complete shroud
YHM

 

Do you have the exhaust centre section?
I will be interested if its in good condition.

 

I have a standard sti 5 mid section,this will fit your car.

£50 inc delivery

 

I'm interested, is it in good condition? and will it definitely fit a 1996 import WRX saloon?
If yes let me know and we can sort out pickup/delivery etc.

Thanks

 

YHPM

 

dij, hi there mate.

Wondered if you have the main instrument display or if your prepared to sell the fuel gauge motor on it's own. This being held in by 3off screws.
Out of interest what colour display do you have. The origanal (black) or have you modified the dials?
Is this gauge set for an WRX or an STi ?
I'm running an STi version2 (96N) so if yours an sti panel that could plug steight into mine that would be sound.

Due to my stupidity i snapped the little pin that holds the fuel gauge pointer into the gauge motor.

Heathrow 20miles from me by the way.

 

Hi, I dont think I can read through all 11 pages so you may not have these parts or you may have sold them but do you have the handbrake handle and the light cover for the interior boot light? if so how much, cheers James

 

I am interested in the boot light unit without the cover and the arial which is centrally mounted on the roof at the rear. Only the screw in section as some tealeaf has lifted mine.
Please P.M.

 

Would you like to email me how much? To whom to pay? Where to collect etc etc?

Cheers,
Glen.

 

Hi mate ,I'm probably a bit late in the day but I don't suppose you have got a centre console arm rest/ cubby hole thing that goes over the handbrake lever?

 

Sorry
dont got

 

sorry dont got