|
View Full Version : Fitting Side Repeaters D4V3 18 March 2004, 19:09 HI I have Classic WRX MY94 and have just brought some clear indicators and side repeaters. Could anyone tell me how to change the side repeaters. Cheers D4V3 ozzy 18 March 2004, 19:47 You need to carefully push the repeater towards the front of the car. This will compress the plastic spring clip and release the clip from the rear of the repeater. The repeater should pivot on the plastic spring clip and pull free from the rear. Stefan D4V3 18 March 2004, 21:50 Cheers Stefan I can now fit them after work tomorrow vindaloo 19 March 2004, 00:28 A little (OK LOTS) of WD40 doesn't harm in helping to make it want to slide. I used a knackered credit card to lift the back edge of mine as they didn't want to leave the car what with me pushing and all. J. D4V3 19 March 2004, 09:58 Looks like i'm going to have some fun trying the thing off then. messiah 19 March 2004, 10:27 I heard the "pushing the lense to the front of the car" explanation before and it didn't work!! it was the GF who realised you need to grab the fattest part of the lense and push (& pull) it towards the back. markwild 19 March 2004, 14:30 Try my site (http://www.wildsworld.co.uk/myimpreza-lights.htm) for pics and instructions from when I did my UK car.... Mark |