johnfelstead
26 February 2004, 19:56
Having a garage clearout.
1 x R180 rear diff assembly, needs a new CWP but LSD unit and the rest of the assembly is fine. Offers
Front and rear standard spec STi5 Anti Roll Bars. Offers
1 x standard spec STi5 fuel pump. offers
1 x 5th gear STi5 gearset (22MPH/1000rpm on 4.444:1 diff) as fitted to some Limited spec TypeR/RA's and standard in the non R/RA STi5. Offers
All are buyer collects in NorthWest.
P20SPD
13 March 2004, 13:36
John, i will have the 180 diff off you if the price is right. Would i have to change anything else?
Can you drop me a mail
Steven
johnfelstead
13 March 2004, 14:00
Its a big job to install in a UK steven, requires diferent driveshafts and hubs/uprights at the rear. It needs a rebuild with a new CWP before installing in a car too.
STI5300
13 March 2004, 19:38
John,
I could be interested but what is a CWP ?
AM@olchfa.org.uk
Where exactly are you.
beryllium
14 March 2004, 20:09
cwp :crown wheel and pinion
john,how much for the fuel pump? is it the 42021FA310 ?
johnfelstead
14 March 2004, 20:24
fuel pump is the standard fit STi5 pump. I flow tested this and it's flowing correctly. I can check the part number tomorrow for you. I was thinking £50 inc postage as a fair price.
beryllium
15 March 2004, 10:09
Hi john
i live in france (Nimes)
i think P&P is not the same as in england.
the quicker for me would be to pay to the shipper.
can you enquiry about this sort of shipping?
i am interested because i just fitted a TD05 instead TD04
STI fuel pump is more flow than wrx (MY99) is'nt it?
Charly
STI5300
15 March 2004, 11:20
John,
Interested in the R180, please contact me.
AM@olchfa.org.uk
01792 208161
johnfelstead
15 March 2004, 15:04
Hi Charly,
i could send it to france for the same cost, it's not that expensive via air mail for a small package. The STi fuel pump should be OK for around 300BHP, any more than that and i would be looking at a walbro replacement to be safe. It does flow more than a standard WRX pump.
YHM Andrew
beryllium
15 March 2004, 15:49
HI John
iit's ok for the pump
i am not authorized to send you a private message (don't know why)
please contact me
beryllium@wanadoo.fr
johnfelstead
15 March 2004, 16:20
i got your PM and replied. :D
mark@wrx
15 March 2004, 16:40
John, what size are the ARB's?
dowser
21 March 2004, 17:28
Hpw much do you want for just the LSD John? :)
Richard
johnfelstead
22 March 2004, 16:54
£200 for the rear diff assembly complete Richard.